Forward declarations are easy to avoid and unnecessary.
Rearrange code to avoid it.
No functional change.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/lm77.c | 173 +++++++++++++++++++++++---------------------------
1 file changed, 81 insertions(+), 92 deletions(-)
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 502771c..9e60eea 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -61,36 +61,6 @@ struct lm77_data {
u8 alarms;
};
-static int lm77_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int lm77_detect(struct i2c_client *client, struct i2c_board_info *info);
-static void lm77_init_client(struct i2c_client *client);
-static int lm77_remove(struct i2c_client *client);
-static u16 lm77_read_value(struct i2c_client *client, u8 reg);
-static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value);
-
-static struct lm77_data *lm77_update_device(struct device *dev);
-
-
-static const struct i2c_device_id lm77_id[] = {
- { "lm77", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, lm77_id);
-
-/* This is the driver that will be inserted */
-static struct i2c_driver lm77_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "lm77",
- },
- .probe = lm77_probe,
- .remove = lm77_remove,
- .id_table = lm77_id,
- .detect = lm77_detect,
- .address_list = normal_i2c,
-};
-
/* straight from the datasheet */
#define LM77_TEMP_MIN (-55000)
#define LM77_TEMP_MAX 125000
@@ -110,6 +80,62 @@ static inline int LM77_TEMP_FROM_REG(s16 reg)
return (reg / 8) * 500;
}
+/*
+ * All registers are word-sized, except for the configuration register.
+ * The LM77 uses the high-byte first convention.
+ */
+static u16 lm77_read_value(struct i2c_client *client, u8 reg)
+{
+ if (reg == LM77_REG_CONF)
+ return i2c_smbus_read_byte_data(client, reg);
+ else
+ return i2c_smbus_read_word_swapped(client, reg);
+}
+
+static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+ if (reg == LM77_REG_CONF)
+ return i2c_smbus_write_byte_data(client, reg, value);
+ else
+ return i2c_smbus_write_word_swapped(client, reg, value);
+}
+
+static struct lm77_data *lm77_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm77_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ dev_dbg(&client->dev, "Starting lm77 update\n");
+ data->temp_input =
+ LM77_TEMP_FROM_REG(lm77_read_value(client,
+ LM77_REG_TEMP));
+ data->temp_hyst =
+ LM77_TEMP_FROM_REG(lm77_read_value(client,
+ LM77_REG_TEMP_HYST));
+ data->temp_crit =
+ LM77_TEMP_FROM_REG(lm77_read_value(client,
+ LM77_REG_TEMP_CRIT));
+ data->temp_min =
+ LM77_TEMP_FROM_REG(lm77_read_value(client,
+ LM77_REG_TEMP_MIN));
+ data->temp_max =
+ LM77_TEMP_FROM_REG(lm77_read_value(client,
+ LM77_REG_TEMP_MAX));
+ data->alarms =
+ lm77_read_value(client, LM77_REG_TEMP) & 0x0007;
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
/* sysfs stuff */
/* read routines for temperature limits */
@@ -266,6 +292,14 @@ static const struct attribute_group lm77_group = {
.attrs = lm77_attributes,
};
+static void lm77_init_client(struct i2c_client *client)
+{
+ /* Initialize the LM77 chip - turn off shutdown mode */
+ int conf = lm77_read_value(client, LM77_REG_CONF);
+ if (conf & 1)
+ lm77_write_value(client, LM77_REG_CONF, conf & 0xfe);
+}
+
/* Return 0 if detection is successful, -ENODEV otherwise */
static int lm77_detect(struct i2c_client *client, struct i2c_board_info *info)
{
@@ -379,69 +413,24 @@ static int lm77_remove(struct i2c_client *client)
return 0;
}
-/*
- * All registers are word-sized, except for the configuration register.
- * The LM77 uses the high-byte first convention.
- */
-static u16 lm77_read_value(struct i2c_client *client, u8 reg)
-{
- if (reg == LM77_REG_CONF)
- return i2c_smbus_read_byte_data(client, reg);
- else
- return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
- if (reg == LM77_REG_CONF)
- return i2c_smbus_write_byte_data(client, reg, value);
- else
- return i2c_smbus_write_word_swapped(client, reg, value);
-}
-
-static void lm77_init_client(struct i2c_client *client)
-{
- /* Initialize the LM77 chip - turn off shutdown mode */
- int conf = lm77_read_value(client, LM77_REG_CONF);
- if (conf & 1)
- lm77_write_value(client, LM77_REG_CONF, conf & 0xfe);
-}
-
-static struct lm77_data *lm77_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm77_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
- || !data->valid) {
- dev_dbg(&client->dev, "Starting lm77 update\n");
- data->temp_input =
- LM77_TEMP_FROM_REG(lm77_read_value(client,
- LM77_REG_TEMP));
- data->temp_hyst =
- LM77_TEMP_FROM_REG(lm77_read_value(client,
- LM77_REG_TEMP_HYST));
- data->temp_crit =
- LM77_TEMP_FROM_REG(lm77_read_value(client,
- LM77_REG_TEMP_CRIT));
- data->temp_min =
- LM77_TEMP_FROM_REG(lm77_read_value(client,
- LM77_REG_TEMP_MIN));
- data->temp_max =
- LM77_TEMP_FROM_REG(lm77_read_value(client,
- LM77_REG_TEMP_MAX));
- data->alarms =
- lm77_read_value(client, LM77_REG_TEMP) & 0x0007;
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
+static const struct i2c_device_id lm77_id[] = {
+ { "lm77", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm77_id);
- return data;
-}
+/* This is the driver that will be inserted */
+static struct i2c_driver lm77_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "lm77",
+ },
+ .probe = lm77_probe,
+ .remove = lm77_remove,
+ .id_table = lm77_id,
+ .detect = lm77_detect,
+ .address_list = normal_i2c,
+};
module_i2c_driver(lm77_driver);
--
1.7.9.7
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
