Thank you for the reply, Guenter. > On Mon, Jan 27, 2014 at 01:19:26PM -0800, John wrote: >> Problem: Upgrading to Linux 3.13 renders fancontrol unable to function as > it did under 3.12.9. Also, pwmconfig generates "broken" config files > under 3.13. >> >> >> Versions: 3.3.5 and built from SVN r6215-20140127. >> >> Mainboard: Asus P8Z77-V Pro >> >> >> I have attached two files assuming attachments are allowed. If not, I will > post separately. >> 1) /etc/fancontrol-3.12.x (works fine under 3.12.9) >> 2) /etc/fancontrol-new (does not work under 3.13 and was generated by > pwmconfig) >> > Was the file created under 3.13 or 3.12 ? Yes, fancontrol-3.12.x was created under 3.12 (actually a while before it) and fancontrol-new was created under 3.13. >> Is this a known bug or user error on my part? >> > Difference in 3.13 is in the file path. Instead of hwmon1/device/pwm5, > you need hwmon1/pwm5, and so on. I saw that the path changed, but shouldn't pwmconfig correct this for me? >> # fancontrol >> Loading configuration from /etc/fancontrol ... >> >> Common settings: >> INTERVAL=10 >> >> Settings for hwmon1/device/pwm5: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/device/fan5_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=80 >> MINSTOP=75 >> MINPWM=75 >> MAXPWM=255 >> >> Settings for hwmon1/device/pwm4: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/device/fan4_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=80 >> MINSTOP=65 >> MINPWM=65 >> MAXPWM=255 >> >> Settings for hwmon1/device/pwm3: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/device/fan3_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=80 >> MINSTOP=60 >> MINPWM=60 >> MAXPWM=255 >> >> Settings for hwmon1/device/pwm1: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/device/fan1_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=80 >> MINSTOP=60 >> MINPWM=60 >> MAXPWM=255 >> > > I assume the following is the log from 3.13 ? Yes, this is running fancontrol under 3.13 using /etc/fancontrol-new which again was generated under 3.13. >> Settings for hwmon1/pwm4: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/fan4_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=150 >> MINSTOP=0 >> MINPWM=0 >> MAXPWM=255 >> >> Settings for hwmon1/pwm3: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/fan3_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=150 >> MINSTOP=100 >> MINPWM=0 >> MAXPWM=255 >> >> Settings for hwmon1/pwm1: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/fan1_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=150 >> MINSTOP=100 >> MINPWM=0 >> MAXPWM=255 >> >> Settings for hwmon1/pwm5: >> Depends on hwmon0/device/temp4_input >> Controls hwmon1/fan5_input >> MINTEMP=20 >> MAXTEMP=60 >> MINSTART=150 >> MINSTOP=100 >> MINPWM=75 >> MAXPWM=255 >> >> Error: file hwmon1/device/pwm5 doesn't exist >> Error: file hwmon1/device/pwm4 doesn't exist >> Error: file hwmon1/device/pwm3 doesn't exist >> Error: file hwmon1/device/pwm1 doesn't exist >> Error: file hwmon1/device/fan5_input doesn't exist >> Error: file hwmon1/device/fan4_input doesn't exist >> Error: file hwmon1/device/fan3_input doesn't exist >> Error: file hwmon1/device/fan1_input doesn't exist >> > > The above log refers to hwmon1/pwmX and hwmon1/fanX_input, > yet the errors refer to hwmon1/device/pwmX and > hwmon1/device/fanX_input. So there is an obvious mismatch. > How does the actual configuration file look like ? I deleted /etc/fancontrol* and rebuilt again under 3.13 (it is attached after I edited it). It now works. I am not sure what I did the first time through. Sorry for the noise to the list.
Attachment:
fancontrol
Description: Binary data
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
