On Mon, Jan 27, 2014 at 01:19:26PM -0800, John wrote: > Problem: Upgrading to Linux 3.13 renders fancontrol unable to function as it did under 3.12.9. Also, pwmconfig generates "broken" config files under 3.13. > > > Versions: 3.3.5 and built from SVN r6215-20140127. > > Mainboard: Asus P8Z77-V Pro > > > I have attached two files assuming attachments are allowed. If not, I will post separately. > 1) /etc/fancontrol-3.12.x (works fine under 3.12.9) > 2) /etc/fancontrol-new (does not work under 3.13 and was generated by pwmconfig) > Was the file created under 3.13 or 3.12 ? > Is this a known bug or user error on my part? > Difference in 3.13 is in the file path. Instead of hwmon1/device/pwm5, you need hwmon1/pwm5, and so on. > # fancontrol > Loading configuration from /etc/fancontrol ... > > Common settings: > INTERVAL=10 > > Settings for hwmon1/device/pwm5: > Depends on hwmon0/device/temp4_input > Controls hwmon1/device/fan5_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=80 > MINSTOP=75 > MINPWM=75 > MAXPWM=255 > > Settings for hwmon1/device/pwm4: > Depends on hwmon0/device/temp4_input > Controls hwmon1/device/fan4_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=80 > MINSTOP=65 > MINPWM=65 > MAXPWM=255 > > Settings for hwmon1/device/pwm3: > Depends on hwmon0/device/temp4_input > Controls hwmon1/device/fan3_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=80 > MINSTOP=60 > MINPWM=60 > MAXPWM=255 > > Settings for hwmon1/device/pwm1: > Depends on hwmon0/device/temp4_input > Controls hwmon1/device/fan1_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=80 > MINSTOP=60 > MINPWM=60 > MAXPWM=255 > I assume the following is the log from 3.13 ? > Settings for hwmon1/pwm4: > Depends on hwmon0/device/temp4_input > Controls hwmon1/fan4_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=150 > MINSTOP=0 > MINPWM=0 > MAXPWM=255 > > Settings for hwmon1/pwm3: > Depends on hwmon0/device/temp4_input > Controls hwmon1/fan3_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=150 > MINSTOP=100 > MINPWM=0 > MAXPWM=255 > > Settings for hwmon1/pwm1: > Depends on hwmon0/device/temp4_input > Controls hwmon1/fan1_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=150 > MINSTOP=100 > MINPWM=0 > MAXPWM=255 > > Settings for hwmon1/pwm5: > Depends on hwmon0/device/temp4_input > Controls hwmon1/fan5_input > MINTEMP=20 > MAXTEMP=60 > MINSTART=150 > MINSTOP=100 > MINPWM=75 > MAXPWM=255 > > Error: file hwmon1/device/pwm5 doesn't exist > Error: file hwmon1/device/pwm4 doesn't exist > Error: file hwmon1/device/pwm3 doesn't exist > Error: file hwmon1/device/pwm1 doesn't exist > Error: file hwmon1/device/fan5_input doesn't exist > Error: file hwmon1/device/fan4_input doesn't exist > Error: file hwmon1/device/fan3_input doesn't exist > Error: file hwmon1/device/fan1_input doesn't exist > The above log refers to hwmon1/pwmX and hwmon1/fanX_input, yet the errors refer to hwmon1/device/pwmX and hwmon1/device/fanX_input. So there is an obvious mismatch. How does the actual configuration file look like ? Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
