Hi Tom, On Tue, 19 Nov 2013 06:28:53 +0000 (UTC), Tom Metro wrote: > Running: > > % sensors -v > sensors version 3.3.1 with libsensors version 3.3.1 > > on Ubuntu 12.04 on an Acer Aspire 8930G laptop with: > > % cat /proc/cpuinfo | fgrep name > model name : Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz > model name : Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz > > and I see: > > % sensors > acpitz-virtual-0 > Adapter: Virtual device > temp1: +38.0°C (crit = +106.0°C) > temp2: +48.0°C (crit = +106.0°C) > temp3: +48.0°C (crit = +106.0°C) > temp4: +43.0°C (crit = +106.0°C) > > nouveau-pci-0100 > Adapter: PCI adapter > temp1: +49.0°C (high = +100.0°C, crit = +110.0°C) > > coretemp-isa-0000 > Adapter: ISA adapter > Core 0: +33.0°C (high = +105.0°C, crit = +105.0°C) > Core 1: +33.0°C (high = +105.0°C, crit = +105.0°C) > > The values reported by coretemp are always 33000 millidegrees: > > % sudo cat /sys/devices/platform/coretemp.0/temp2_input > 33000 > > as observed over the course of a week. I have not tried to intentionally > stress the CPU, but had assumed that if it was reading real values, I would > have seen some variation. > > However, I read in the FAQ: > http://lm-sensors.org/wiki/FAQ/Chapter3#coretempreturnsunrealisticvalues > > It isn't really returning degrees Celsius. At high temperatures, the > (small) thermal margin is almost expressed in degrees Celsius, but at low > temperature, the (high) thermal margin is no longer expressed in actual > degrees Celsius. So, if the temperature value reported by coretemp is > unrealistically low, all it means is that you are far away from the > critical limit so your systems are running totally fine and cool... > > So does that mean it is expected to see a constant (to 5 decimal places) > value, until the cores heat up beyond some threshold? (If so, I'll add this > to the FAQ.) Don't get fooled by the 5 decimal places, all drivers return values in millidegrees Celsius regardless of their accuracy and resolution. The coretemp resolution is 1 degree so you'll always see 000 as the last 3 digits. You should really stress the CPU and see what happens. With really good cooling and no CPU load at all, it is possible for temperatures to stay stable within one degree Celsius. Another possibility is that this particular incarnation of the sensors do not report values below 33°C. We know these sensors have poor accuracy at low temperatures, maybe Intel decided to not expose too low values to make them look plausible. In that case you'd see 33°C most of the time, as a floor measurement, with temperature peaks on high CPU load. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
