that worked. I have configured the pwmconfig file, but its not affecting the fans. I have it in /etc/fancontrol. Do I need to reference it from somewhere else? Here's the file. # Configuration file generated by pwmconfig, changes will be lost INTERVAL=1 DEVPATH=hwmon1=devices/platform/coretemp.0 hwmon3=devices/platform/nct6775.656 DEVNAME=hwmon1=coretemp hwmon3=nct6791 FCTEMPS=hwmon3/device/pwm2=hwmon1/device/temp1_input hwmon3/device/pwm1=hwmon1/device/temp1_input FCFANS=hwmon3/device/pwm2=hwmon3/device/fan2_input hwmon3/device/pwm1=hwmon3/device/fan1_input MINTEMP=hwmon3/device/pwm2=60 hwmon3/device/pwm1=60 MAXTEMP=hwmon3/device/pwm2=60 hwmon3/device/pwm1=60 MINSTART=hwmon3/device/pwm2=45 hwmon3/device/pwm1=150 MINSTOP=hwmon3/device/pwm2=40 hwmon3/device/pwm1=140 MINPWM=hwmon3/device/pwm2=45 hwmon3/device/pwm1=150 MAXPWM=hwmon3/device/pwm2=255 hwmon3/device/pwm1=255 On Mon, Nov 11, 2013 at 11:50 AM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote: > On Mon, Nov 11, 2013 at 11:46:21AM -0800, p. stephen w wrote: > > it seems after reboot, I've lost the sensors. To get them back I have to > > run modprobe again. > > > The driver doesn't auto-load. Just add nct6775 to /etc/modules. > > Guenter > > > > > On Mon, Nov 11, 2013 at 11:17 AM, p. stephen w <p.stephenwille@xxxxxxxxx > >wrote: > > > > > Thanks, but I'd still like to contribute. I know this stuff takes time > > > and energy. > > > > > > > > > On Mon, Nov 11, 2013 at 11:11 AM, Guenter Roeck <linux@xxxxxxxxxxxx > >wrote: > > > > > >> On Mon, Nov 11, 2013 at 10:31:40AM -0800, p. stephen w wrote: > > >> > woot-woot, that was it. Running Make install did the trick. Like I > > >> said, > > >> > I'm a Linux noob. > > >> > > > >> > Where can I send you $50? > > >> > > > >> That was free of charge ... > > >> > > >> Guenter > > >> > > >> > > > >> > On Mon, Nov 11, 2013 at 10:29 AM, Guenter Roeck <linux@xxxxxxxxxxxx > > > > >> wrote: > > >> > > > >> > > On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote: > > >> > > > I just followed the link from the lm-sensors devices page to > the > > >> GitHub > > >> > > > page (is that yours?), and re-cloned it. This time the output > was a > > >> > > little > > >> > > > different, and I have a few .ko files in my personal directory. > > >> They are > > >> > > > not in the hwmon dir. I thought I might try moving them there > and > > >> > > > re-running sensors-detect. > > >> > > > > > >> > > > Githum repo: > > >> > > > https://github.com/groeck/nct6775.git > > >> > > > > > >> > > > Make: > > >> > > > Mint nct6775 # make all > > >> > > > CC [M] /home/stephen/nct6775/nct6775.o > > >> > > > > > >> > > > Building modules, stage 2. > > >> > > > MODPOST 1 modules > > >> > > > CC /home/stephen/nct6775/nct6775.mod.o > > >> > > > LD [M] /home/stephen/nct6775/nct6775.ko > > >> > > > > > >> > > > > > >> > > I asked earlier if you did run "make install". Looks like you > didn't. > > >> > > > > >> > > > > >> > > > Contents of home dir after make all: > > >> > > > Mint nct6775 # ls > > >> > > > compat.h Makefile nct6775.c nct6775.mod.o > > >> README.ASRock > > >> > > > LICENSE modules.order nct6775.ko nct6775.o > > >> > > > lm75.h Module.symvers nct6775.mod.c README > > >> > > > > > >> > > > > > >> > > > Sensors -v > > >> > > > Mint nct6775 # sensors -v > > >> > > > sensors version 3.3.4 with libsensors version 3.3.4 > > >> > > > > > >> > > > > > >> > > > > > >> > > > I run everything as root. > > >> > > > Should I copy any of the .ko, .o, and .c files from your driver > > >> into any > > >> > > > other folders? > > >> > > > > > >> > > Run "make install" followed by "modprobe nct6775". > > >> > > > > >> > > > I'm using the sensors-detect that came with the manual > installation > > >> of > > >> > > > lm-sensors, latest version. I don't have a prog/detect, either > > >> folder or > > >> > > > command. > > >> > > > > >> > > The prog/detect directory is in the lm-sensors source, so if you > > >> > > cloned lm-sensors from github or svn you should have it. > > >> > > > > >> > > Thanks, > > >> > > Guenter > > >> > > > > >> > > > Just run sensors_detect from prog/detect/. I am not sure if > you > > >> > > actually > > >> > > > installed it. If not, you just keep running the installed > version. > > >> > > > > > >> > > > -- > > >> > > > > > >> > > > > > >> > > > _____________________________ > > >> > > > Stephen Wille | pstephenwille.com > > >> > > > *new address p.stephenwille@xxxxxxxxx <p.stephenwille@xxxxxxxxx > >* > > >> > > > _______________________________________________ > > >> > > > lm-sensors mailing list > > >> > > > lm-sensors@xxxxxxxxxxxxxx > > >> > > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > >> > > > > > >> > > > > >> > > > >> > > > >> > > > >> > -- > > >> > > > >> > > > >> > _____________________________ > > >> > Stephen Wille | pstephenwille.com > > >> > *new address p.stephenwille@xxxxxxxxx <p.stephenwille@xxxxxxxxx>* > > >> > > > > > > > > > > > > -- > > > > > > > > > _____________________________ > > > Stephen Wille | pstephenwille.com > > > *new address p.stephenwille@xxxxxxxxx <p.stephenwille@xxxxxxxxx>* > > > > > > > > > > > -- > > > > > > _____________________________ > > Stephen Wille | pstephenwille.com > > *new address p.stephenwille@xxxxxxxxx <p.stephenwille@xxxxxxxxx>* > -- _____________________________ Stephen Wille | pstephenwille.com *new address p.stephenwille@xxxxxxxxx <p.stephenwille@xxxxxxxxx>* _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
