Re: [PATCH 3/7] arm: dts: dra7: add bandgap entry

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14:32-20131001, Eduardo Valentin wrote:
> This patch adds bandgap IP entry on DRA7 dtsi device tree file.
> 
> Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
> ---
>  arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 3a746c2..4e9b159 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -53,6 +53,18 @@
>  		};
>  	};
>  
> +	bandgap: bandgap {
	would you like to follow bandgap: bandgap@4a0021e0 convention?
Also, could you move it under ocp?
I already commented about this previously here: 
https://lkml.org/lkml/2013/9/27/300

> +		reg = <0x4a0021e0 0xc
> +			0x4a00232c 0xc
> +			0x4a002380 0x2c
> +			0x4a0023C0 0x3c
> +			0x4a002564 0x8
> +			0x4a002574 0x50>;
> +		compatible = "ti,dra752-bandgap";
> +		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> +		#thermal-sensor-cells = <1>;
> +	};
> +
>  	gic: interrupt-controller@48211000 {
>  		compatible = "arm,cortex-a15-gic";
>  		interrupt-controller;
-- 
Regards,
Nishanth Menon

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux