On 14:32-20131001, Eduardo Valentin wrote: > This patch changes a dtsi file to contain the thermal data ^^ introduces? > for DSPEVE domain on DRA7 and later SoCs. This data will > enable a thermal shutdown at 125C. > > This thermal data can be reused across TI SoC devices. > > Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx> > --- > arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi > > diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi > new file mode 100644 > index 0000000..f8b9051 > --- /dev/null > +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi > @@ -0,0 +1,28 @@ > +/* > + * Device Tree Source for DRA7 SoC DSPEVE thermal > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ > + * Contact: Eduardo Valentin <eduardo.valentin@xxxxxx> > + * > + * This file is licensed under the terms of the GNU General Public License > + * version 2. This program is licensed "as is" without any warranty of any > + * kind, whether express or implied. > + */ > + > +#include <dt-bindings/thermal/thermal.h> > + > +dspeve_thermal: dspeve_thermal { > + polling-delay-passive = <250>; /* milliseconds */ > + polling-delay = <1000>; /* milliseconds */ > + > + /* sensor ID */ ^^ > + thermal-sensors = <&bandgap 3>; ^^ tab control a bit? ;) > + > + trips { > + dspeve_crit: dspeve_crit { > + temperature = <125000>; /* milliCelsius */ > + hysteresis = <2000>; /* milliCelsius */ > + type = THERMAL_TRIP_CRITICAL; > + }; > + }; > +}; -- Regards, Nishanth Menon _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
