On 09/08/2013 09:33 AM, Tomas Larsson wrote:
lsmod sayas that they are loaded dmesg i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: resource 0000:00:1f.3 [io 0x2000-0x201f] conflicts with ACPI region SMB1 [io 0x2000-0x2016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver coretemp coretemp.0: Unable to read TjMax from CPU. coretemp coretemp.0: Unable to read TjMax from CPU. smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997 ACPI: resource smsc47m1 [io 0x0680-0x06ff] conflicts with ACPI region RTIO [io 0x680-0x6ff] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
You do see the answer above. You have an ACPI resource conflict. See http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31 Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
