I have 2 motherboards, both of the same type. They are INTEL D945 with ATOM 330 processor. One of them is running CENTOS 5.9, the other one is running CENTOS 6.4, both 32-bit versions After installing lm_sensors and running sensors-detect I have the following output: CENTOS 5.9 sensors version 2.10.7 with libsensors version 2.10.7 [root@BLATUNGA ~]# /etc/rc.d/init.d/lm_sensors status smsc47m192-i2c-0-2d Adapter: SMBus I801 adapter at 3000 +2.5V: +2.53 V (min = +0.00 V, max = +3.32 V) Vcore: +1.15 V (min = +0.00 V, max = +2.99 V) +3.3V: +3.23 V (min = +0.00 V, max = +4.38 V) +5V: +4.92 V (min = +0.00 V, max = +6.64 V) +12V: +11.94 V (min = +0.00 V, max = +15.94 V) VCC: +3.25 V (min = +0.00 V, max = +4.38 V) +1.5V: +1.56 V (min = +0.00 V, max = +1.99 V) +1.8V: +1.76 V (min = +0.00 V, max = +2.39 V) Chipset Temp: +44.0°C (low = -127°C, high = +127°C) CPU Temp: +69.0°C (low = -127°C, high = +127°C) System Temp: +55.0°C (low = -127°C, high = +127°C) vid: +2.050 V (VRM Version 8.2) smsc47m1-isa-0680 Adapter: ISA adapter Case Fan: 0 RPM (min = 1280 RPM, div = 4) ALARM CPU Fan: 0 RPM (min = 1280 RPM, div = 4) ALARM [root@BLATUNGA ~]# sensors -v sensors version 2.10.7 with libsensors version 2.10.7 [root@BLATUNGA ~]# CENTOS 6.4 sensors version 3.1.1 with libsensors version 3.1.1 [root@seedbox ~]# /etc/rc.d/init.d/lm_sensors status coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0°C (high = +70.0°C, crit = +90.0°C) Core 1: +36.0°C (high = +70.0°C, crit = +90.0°C) [root@seedbox ~]# sensors -v sensors version 3.1.1 with libsensors version 3.1.1 [root@seedbox ~]# Why is it that the outputs are different, It seems to be impossible to get the rest of the output in the 3.1.1 version With best regards Tomas Larsson TL Engineering & Consultants (TLEC) Engelbrektsgatan 121 SE 50639 Borås Sweden +46 (0)739-932673 tomas@xxxxxxx www.tlec.se _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
