On Wednesday, July 17, 2013 11:17:20 AM Eduardo Valentin wrote:
> This patch changes the cpufreq-cpu0 driver to consider if
> a cpu needs cooling (with cpufreq). In case the cooling is needed,
> it can be flagged at the cpu0 device tree node, with the boolean
> property 'needs-cooling'.
>
> In case this boolean is present, the driver will
> load a cpufreq cooling device in the system. The cpufreq-cpu0
> driver is not interested in determining how the system should
> be using the cooling device. The driver is responsible
> only of loading the cooling device.
>
> Describing how the cooling device will be used can be
> accomplished by setting up a thermal zone that references
> and is composed by the cpufreq cooling device.
>
> Cc: "Rafael J. Wysocki" <rjw@xxxxxxx>
FWIW, this change is fine by me, but I guess it should be handled along with
the entire series.
> Cc: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxx>
> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
> Cc: cpufreq@xxxxxxxxxxxxxxx
> Cc: linux-pm@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
> ---
> Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 3 +++
> drivers/cpufreq/cpufreq-cpu0.c | 8 ++++++++
> 2 files changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> index 051f764..e8ff916 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> @@ -15,6 +15,8 @@ Optional properties:
> - clock-latency: Specify the possible maximum transition latency for clock,
> in unit of nanoseconds.
> - voltage-tolerance: Specify the CPU voltage tolerance in percentage.
> +- needs-cooling: The generic cpu cooling (freq clipping) is loaded by the
> +generic cpufreq-cpu0 driver in case the device tree node has this boolean.
>
> Examples:
>
> @@ -33,6 +35,7 @@ cpus {
> 198000 850000
> >;
> clock-latency = <61036>; /* two CLK32 periods */
> + needs-cooling;
> };
>
> cpu@1 {
> diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
> index ad1fde2..4a8747a 100644
> --- a/drivers/cpufreq/cpufreq-cpu0.c
> +++ b/drivers/cpufreq/cpufreq-cpu0.c
> @@ -20,6 +20,9 @@
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> +#include <linux/thermal.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/cpumask.h>
>
> static unsigned int transition_latency;
> static unsigned int voltage_tolerance; /* in percentage */
> @@ -28,6 +31,7 @@ static struct device *cpu_dev;
> static struct clk *cpu_clk;
> static struct regulator *cpu_reg;
> static struct cpufreq_frequency_table *freq_table;
> +static struct thermal_cooling_device *cdev;
>
> static int cpu0_verify_speed(struct cpufreq_policy *policy)
> {
> @@ -268,6 +272,9 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
> goto out_free_table;
> }
>
> + if (of_property_read_bool(np, "needs-cooling"))
> + cdev = cpufreq_cooling_register(cpu_present_mask);
> +
> of_node_put(np);
> of_node_put(parent);
> return 0;
> @@ -283,6 +290,7 @@ out_put_parent:
>
> static int cpu0_cpufreq_remove(struct platform_device *pdev)
> {
> + cpufreq_cooling_unregister(cdev);
> cpufreq_unregister_driver(&cpu0_cpufreq_driver);
> opp_free_cpufreq_table(cpu_dev, &freq_table);
>
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
