On Sat, Jul 20, 2013 at 11:43:26PM +0000, Joseph Schmoley wrote: > Hi, > > I have Unbuntu 12.10 installed on a small SBC model KEEX-6100 from Quanmax > (http://www.quanmax.com/en/products-detail.php?num=4). > > The specs for this motherboard are: > Intel Core i7 > Intel QM67 / HM65 Exress Chipset > > I've ran "sudo sensors-detect" and answered YES to all the prompts to detect > everyting. Afterwards my /etc/modules looks like this: > > lp > > # Generated by sensors-detect on Sat Jul 13 10:49:21 2013 > # Chip drivers > coretemp > f71882fg > > Then I ran "sudo service module-init-tools restart" and the output is a > little vague: > > stop: Unknown instance: > module-init-tools stop/waiting > > I'm not quite sure what the "stop:" line means. Anyways, after this when I > run sensors I get: > > acpitz-virtual-0 > Adapter: Virtual device > temp1: +35.0°C (crit = +100.0°C) > > coretemp-isa-0000 > Adapter: ISA adapter > Physical id 0: +36.0°C (high = +86.0°C, crit = +100.0°C) > Core 0: +31.0°C (high = +86.0°C, crit = +100.0°C) > Core 1: +32.0°C (high = +86.0°C, crit = +100.0°C) > Core 2: +30.0°C (high = +86.0°C, crit = +100.0°C) > Core 3: +30.0°C (high = +86.0°C, crit = +100.0°C) > > The temperatures are great, but no voltages are detected. I desperately > need to be able to show all the voltage sensors data. Does anyone know what > I'm missing here? > > Any helpful hints would be much appreciated. > Do you see anything interesting in the output of dmesg ? Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
