Hi, I have Unbuntu 12.10 installed on a small SBC model KEEX-6100 from Quanmax (http://www.quanmax.com/en/products-detail.php?num=4). The specs for this motherboard are: Intel Core i7 Intel QM67 / HM65 Exress Chipset I've ran "sudo sensors-detect" and answered YES to all the prompts to detect everyting. Afterwards my /etc/modules looks like this: lp # Generated by sensors-detect on Sat Jul 13 10:49:21 2013 # Chip drivers coretemp f71882fg Then I ran "sudo service module-init-tools restart" and the output is a little vague: stop: Unknown instance: module-init-tools stop/waiting I'm not quite sure what the "stop:" line means. Anyways, after this when I run sensors I get: acpitz-virtual-0 Adapter: Virtual device temp1: +35.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +36.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +31.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +32.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +30.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +30.0°C (high = +86.0°C, crit = +100.0°C) The temperatures are great, but no voltages are detected. I desperately need to be able to show all the voltage sensors data. Does anyone know what I'm missing here? Any helpful hints would be much appreciated. Thanks, -Jac _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
