When registering a thermal zone device using platform information
via bind_params, the thermal framework will always perform the
cdev binding using the lowest and highest limits (THERMAL_NO_LIMIT).
This patch changes the data structures so that it is possible
to inform what are the desired limits for each trip point
inside a bind_param. The way the binding is performed is also
changed so that it uses the new data structure.
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
---
Documentation/thermal/sysfs-api.txt | 7 +++++++
drivers/thermal/thermal_core.c | 19 +++++++++++++++----
include/linux/thermal.h | 10 ++++++++++
3 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index a71bd5b..2ad50e7 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -134,6 +134,13 @@ temperature) and throttle appropriate devices.
this thermal zone and cdev, for a particular trip point.
If nth bit is set, then the cdev and thermal zone are bound
for trip point n.
+ .limits: This is an array of cooling state limits. Must have exactly
+ 2 * thermal_zone.number_of_trip_points. It is an array consisting
+ of tuples <lower-state upper-state> of state limits. Each trip
+ will be associated with one state limit tuple when binding.
+ A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS>
+ on all trips. These limits are used when binding a cdev to a
+ trip point.
.match: This call back returns success(0) if the 'tz and cdev' need to
be bound, as per platform data.
1.4.2 struct thermal_zone_params
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 247528b..096c8be 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -202,14 +202,23 @@ static void print_bind_err_msg(struct thermal_zone_device *tz,
}
static void __bind(struct thermal_zone_device *tz, int mask,
- struct thermal_cooling_device *cdev)
+ struct thermal_cooling_device *cdev,
+ unsigned long *limits)
{
int i, ret;
for (i = 0; i < tz->trips; i++) {
if (mask & (1 << i)) {
+ unsigned long upper, lower;
+
+ upper = THERMAL_NO_LIMIT;
+ lower = THERMAL_NO_LIMIT;
+ if (limits) {
+ lower = limits[i * 2];
+ upper = limits[i * 2 + 1];
+ }
ret = thermal_zone_bind_cooling_device(tz, i, cdev,
- THERMAL_NO_LIMIT, THERMAL_NO_LIMIT);
+ upper, lower);
if (ret)
print_bind_err_msg(tz, cdev, ret);
}
@@ -254,7 +263,8 @@ static void bind_cdev(struct thermal_cooling_device *cdev)
if (tzp->tbp[i].match(pos, cdev))
continue;
tzp->tbp[i].cdev = cdev;
- __bind(pos, tzp->tbp[i].trip_mask, cdev);
+ __bind(pos, tzp->tbp[i].trip_mask, cdev,
+ tzp->tbp[i].binding_limits);
}
}
@@ -292,7 +302,8 @@ static void bind_tz(struct thermal_zone_device *tz)
if (tzp->tbp[i].match(tz, pos))
continue;
tzp->tbp[i].cdev = pos;
- __bind(tz, tzp->tbp[i].trip_mask, pos);
+ __bind(tz, tzp->tbp[i].trip_mask, pos,
+ tzp->tbp[i].binding_limits);
}
}
exit:
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index a386a1c..39575eb 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -207,6 +207,16 @@ struct thermal_bind_params {
* See Documentation/thermal/sysfs-api.txt for more information.
*/
int trip_mask;
+
+ /*
+ * This is an array of cooling state limits. Must have exactly
+ * 2 * thermal_zone.number_of_trip_points. It is an array consisting
+ * of tuples <lower-state upper-state> of state limits. Each trip
+ * will be associated with one state limit tuple when binding.
+ * A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS>
+ * on all trips.
+ */
+ unsigned long *binding_limits;
int (*match) (struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev);
};
--
1.8.2.1.342.gfa7285d
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
