Again, thank you both. (-:
On Fri, Jun 28, 2013 at 6:41 AM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
Thanks, to keep simple I'll add it on top of my -next tree instead of merging it.On Fri, Jun 28, 2013 at 02:05:26PM +0200, Jean Delvare wrote:
> On Thu, 27 Jun 2013 10:12:51 -0700, Guenter Roeck wrote:
> > On Thu, Jun 27, 2013 at 10:36:31AM +0200, Jean Delvare wrote:
> > > This breaks limit rounding on the DS1621. Limits have a resolution of
> > > 0.5°C on that chip, so limit values should rounded to the closest
> > > half-degree. It used to work but no longer: if I write 20300 to
> > > temp1_min, it is rounded down to 20000, while it should be rounded up
> > > to 20500.
> >
> > Can you test the following patch ? It follows the logic implemented in the
> > tmp401 driver.
>
> Tested OK, thanks :)
>
> Tested-by: Jean Delvare <khali@xxxxxxxxxxxx>
>
> And as the code looks sane too:
>
> Acked-by: Jean Delvare <khali@xxxxxxxxxxxx>
>
Guenter
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
