Overtemperature and hysteresis registers only exist for primary
temperature registers, not for alternates, so do not assign
those registers when initializing alternates.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/nct6775.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 137c8ce..a27e625 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -3427,8 +3427,10 @@ static int nct6775_probe(struct platform_device *pdev)
data->have_temp |= 1 << i;
data->have_temp_fixed |= 1 << i;
data->reg_temp[0][i] = reg_temp_alternate[i];
- data->reg_temp[1][i] = reg_temp_over[i];
- data->reg_temp[2][i] = reg_temp_hyst[i];
+ if (i < num_reg_temp) {
+ data->reg_temp[1][i] = reg_temp_over[i];
+ data->reg_temp[2][i] = reg_temp_hyst[i];
+ }
data->temp_src[i] = i + 1;
continue;
}
--
1.7.9.7
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
