On Thu, May 09, 2013 at 10:20:45AM -0700, Guenter Roeck wrote: > Hi Andre, > [ ... ] > > CPUTIN: +27.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > > AUXTIN0: +101.0°C (high = +0.0°C, hyst = +64.0°C) sensor = thermistor > > AUXTIN1: +105.0°C (high = +75.0°C, hyst = +0.0°C) sensor = thermistor > > AUXTIN2: +105.0°C (high = +64.0°C, hyst = +26.0°C) sensor = thermistor > > AUXTIN3: +16.0°C (high = +0.0°C, hyst = +27.0°C) sensor = thermal diode [ ... ] > > > * `AUXTIN0/1/2` has unrealistic values (i don't know what AUXTIN is) > > AUXTINx are temperature sensor input pins on the NCT6779. > > Most likely you see odd values because the sensors are not connected to anything > on the board. I'll have a look into the driver to make sure the limit registers > are correct; I am a bit concerned about the odd values for both "high" and "hyst". > Followup: Turs out there should be no "high" and "hyst" attributes for AUXTIN[0-3]. I pushed a patch into the stand-alone driver a couple of minutes ago. Can you give it a try to make sure it works ? Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
