This patch adds the DT support to NTC driver to parse the
platform data.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
---
drivers/hwmon/ntc_thermistor.c | 93 ++++++++++++++++++++++++++++++++--------
1 file changed, 75 insertions(+), 18 deletions(-)
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index d92b237..cfedbd3 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -26,6 +26,7 @@
#include <linux/math64.h>
#include <linux/platform_device.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <linux/platform_data/ntc_thermistor.h>
@@ -37,6 +38,41 @@ struct ntc_compensation {
unsigned int ohm;
};
+static const struct platform_device_id ntc_thermistor_id[] = {
+ { "ncp15wb473", TYPE_NCPXXWB473 },
+ { "ncp18wb473", TYPE_NCPXXWB473 },
+ { "ncp21wb473", TYPE_NCPXXWB473 },
+ { "ncp03wb473", TYPE_NCPXXWB473 },
+ { "ncp15wl333", TYPE_NCPXXWL333 },
+ { },
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id ntc_match[] = {
+ { .compatible = "ntc,ncp15wb473", .data = (void *)TYPE_NCPXXWB473 },
+ { .compatible = "ntc,ncp18wb473", .data = (void *)TYPE_NCPXXWB473 },
+ { .compatible = "ntc,ncp21wb473", .data = (void *)TYPE_NCPXXWB473 },
+ { .compatible = "ntc,ncp03wb473", .data = (void *)TYPE_NCPXXWB473 },
+ { .compatible = "ntc,ncp15wl333", .data = (void *)TYPE_NCPXXWL333 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ntc_match);
+#endif
+
+/* Get NTC type either from device tree or platform data. */
+static enum ntc_thermistor_type thermistor_get_type
+ (struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(of_match_ptr(ntc_match),
+ pdev->dev.of_node);
+ return (unsigned int)match->data;
+ }
+
+ return platform_get_device_id(pdev)->driver_data;
+}
+
/*
* A compensation table should be sorted by the values of .ohm
* in descending order.
@@ -126,6 +162,27 @@ struct ntc_data {
char name[PLATFORM_NAME_SIZE];
};
+#ifdef CONFIG_OF
+static void ntc_thermistor_parse_dt(struct ntc_thermistor_platform_data *pdata,
+ struct device_node *np)
+{
+ of_property_read_u32(np, "pullup-uV", &pdata->pullup_uV);
+ of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm);
+ of_property_read_u32(np, "pulldown-ohm", &pdata->pulldown_ohm);
+ if (of_find_property(np, "connected-positive", NULL))
+ pdata->connect = NTC_CONNECTED_POSITIVE;
+ else /* status change should be possible if not always on. */
+ pdata->connect = NTC_CONNECTED_GROUND;
+}
+#else
+static void
+static void ntc_thermistor_parse_dt(struct ntc_thermistor_platform_data *pdata,
+ struct device_node *np)
+{
+ return;
+}
+#endif
+
static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
{
if (divisor == 0 && dividend == 0)
@@ -313,9 +370,19 @@ static const struct attribute_group ntc_attr_group = {
static int ntc_thermistor_probe(struct platform_device *pdev)
{
struct ntc_data *data;
- struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct ntc_thermistor_platform_data *pdata = NULL;
int ret = 0;
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ ntc_thermistor_parse_dt(pdata, np);
+ } else
+ pdata = pdev->dev.platform_data;
+
if (!pdata) {
dev_err(&pdev->dev, "No platform init data supplied.\n");
return -ENODEV;
@@ -353,9 +420,9 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
data->dev = &pdev->dev;
data->pdev = pdev;
data->pdata = pdata;
- strlcpy(data->name, pdev->id_entry->name, sizeof(data->name));
+ strncpy(data->name, dev_name(&pdev->dev), PLATFORM_NAME_SIZE);
- switch (pdev->id_entry->driver_data) {
+ switch (thermistor_get_type(pdev)) {
case TYPE_NCPXXWB473:
data->comp = ncpXXwb473;
data->n_comp = ARRAY_SIZE(ncpXXwb473);
@@ -365,9 +432,8 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
data->n_comp = ARRAY_SIZE(ncpXXwl333);
break;
default:
- dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
- pdev->id_entry->driver_data,
- pdev->id_entry->name);
+ dev_err(&pdev->dev, "Unknown device type: %u\n",
+ thermistor_get_type(pdev));
return -EINVAL;
}
@@ -386,9 +452,8 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
goto err_after_sysfs;
}
- dev_info(&pdev->dev, "Thermistor %s:%d (type: %s/%lu) successfully probed.\n",
- pdev->name, pdev->id, pdev->id_entry->name,
- pdev->id_entry->driver_data);
+ dev_info(&pdev->dev, "Thermistor successfully probed.\n");
+
return 0;
err_after_sysfs:
sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
@@ -406,19 +471,11 @@ static int ntc_thermistor_remove(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id ntc_thermistor_id[] = {
- { "ncp15wb473", TYPE_NCPXXWB473 },
- { "ncp18wb473", TYPE_NCPXXWB473 },
- { "ncp21wb473", TYPE_NCPXXWB473 },
- { "ncp03wb473", TYPE_NCPXXWB473 },
- { "ncp15wl333", TYPE_NCPXXWL333 },
- { },
-};
-
static struct platform_driver ntc_thermistor_driver = {
.driver = {
.name = "ntc-thermistor",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ntc_match),
},
.probe = ntc_thermistor_probe,
.remove = ntc_thermistor_remove,
--
1.7.9.5
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
