Hi Artem, On Fri, 15 Feb 2013 09:47:19 +0000 (UTC), Artem S. Tashkinov wrote: > Hi, > > Here's my Asus P8P67 Pro lm-sensors configuration (I couldn't create a wiki page): I've created it for you: http://www.lm-sensors.org/wiki/Configurations/Asus/P8P67%20Pro > chip "nct6776-*" > label temp1 "MB" > set temp1_max 50 > set temp1_max_hyst 40 > > ignore temp2 > > label temp3 "CPU" > > label in0 "Vcore" > set in0_min 0.75 > set in0_max 1.35 > > label in2 "AVCC" > set in2_min 3.3 * 0.95 > set in2_max 3.3 * 1.1 > > label in3 "+3.3V" > set in3_min 3.3 * 0.95 > set in3_max 3.3 * 1.1 > > label in7 "3VSB" > set in7_min 3.3 * 0.95 > set in7_max 3.3 * 1.1 This looks incomplete: no +5V, no +12V and no fans? The BIOS shows them so they must be present. If you need help to find the mapping and scaling for +5V and +12V, please read this article: http://www.lm-sensors.org/wiki/VoltageLabelsAndScaling Also the voltage limits are odd, there's little rationale for allowing -5% but up to +10%. The ATX specification says +/- 5% for positive voltage values. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
