This patch series is to add tegra30 thermal driver. It use new linux thermal framework, which is developing by Durgadoss. Note: 1. my series are based on the patches: http://thread.gmane.org/gmane.linux.power-management.general/30692 , which come from Durgadoss. And the tree is Rui's -next tree. Next steps: 1. enhance the tegra30 thermal driver, something like handling the irq, setting the sensor limit value. 2. seprate codes to create a new files which is for cooling device, something like tegra3_cooling.c. it will handle dvfs. Wei Ni (9): ARM: dt: t30 cardhu: add dt entry for lm90 hwmon: (lm90) split set&show temp as common codes hwmon: (lm90) add support to handle irq hwmon: (lm90) use macros for the indexes of temp8 and temp11 Thermal: Support using dt node to get sensor hwmon: (lm90) Register to the thermal framework thermal: tegra30: add tegra30 thermal driver ARM: dt: t30 cardhu: add dt entry for thermal driver ARM: tegra: defconfig: enable thermal framework .../devicetree/bindings/thermal/tegra3-thermal.txt | 41 ++ arch/arm/boot/dts/tegra30-cardhu.dtsi | 27 + arch/arm/configs/tegra_defconfig | 2 + drivers/hwmon/lm90.c | 514 +++++++++++++++----- drivers/thermal/Kconfig | 9 + drivers/thermal/Makefile | 1 + drivers/thermal/tegra3_thermal.c | 289 +++++++++++ drivers/thermal/thermal_sys.c | 30 ++ include/linux/thermal.h | 9 + 9 files changed, 812 insertions(+), 110 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/tegra3-thermal.txt create mode 100644 drivers/thermal/tegra3_thermal.c -- 1.7.9.5 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
