Hi! I have an Intel DP67BA motherboard, for which I downloaded the DQ67EP config and modified it somewhat to show useful values for the DP67BA. I attach the resulting config file if anybody else could have use for it. BR, /Joakim -- http://www.df.lth.se/~jokke/
# Modified version of # http://www.lm-sensors.org/wiki/Configurations/Intel/DQ67EP # to correspond to the DP67BA. # # "FRONT" and "REAR" fan labels correspond to the motherboard # headers, but not necessarily the actual fan locations. chip "nct6775-isa-0290" # Fans label fan1 "Rear fan" set fan1_min 250 # From IDU label fan2 "CPU fan" set fan2_min 250 # From IDU label fan3 "Front fan" set fan3_min 250 # From IDU # There is no fan4 on the board ignore fan4 # Voltages # Processor Vcc label in0 "Vcore" set in0_min 0.6 # From IDU set in0_max 1.6 # From IDU # This should be "12 Volts", but computations are strange label in1 "+12V" compute in1 @*10.92, @/10.92 set in1_min 12*0.95 set in1_max 12*1.05 # AVCC(?) - Not shown in BIOS or IDU label in2 "AVCC" set in2_min 3.1 # same as +3.3V set in2_max 3.5 # same as +3.3V # +3.3 Volts label in3 "+3.3V" set in3_min 3.1 # from IDU set in3_max 3.5 # from IDU # +5 Volts label in4 "+5V" compute in4 4.9*@, @/4.9 set in4_min 4.7 # from IDU set in4_max 5.3 # from IDU # Memory Vcc ("SDRAM Vcc" in IDU) label in5 "+1.5V" compute in5 1.5*@, @/1.5 set in5_min 1.4 # from IDU set in5_max 1.6 # from IDU # PCH Vcc label in6 "PCH" set in6_min 0.6 # from IDU set in6_max 1.6 # from IDU # +3.3 Volt Standby label in7 "3VSB" set in7_min 3.1 # from IDU set in7_max 3.5 # from IDU # VBAT(?) - Not shown in BIOS or IDU label in8 "Vbat" set in8_min 3.0 set in8_max 3.5 # It shows +2.050 V, seems to be not used ignore cpu0_vid # Temperatures # Labeled as "SYSTIN" # Guess! label temp1 "DIMM temp" set temp1_max 80 # From IDU set temp1_max_hyst 75 # From IDU # Labeled as "CPUTIN" label temp2 "VR temp" set temp2_max 80 # From IDU set temp2_max_hyst 75 # From IDU # Labeled as "PECI Agent 0" # Guess! label temp3 "CPU temp" set temp3_max 80 # From IDU set temp3_max_hyst 75 # From IDU # Labeled as "PCH_CHIP_TEMP" label temp7 "PCH temp" # Labeled as "PECI Agent 1" # Not used ignore temp8
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
