On Tue, 5 Feb 2013, Jean Delvare wrote:
On Tue, 5 Feb 2013 11:33:49 +0100 (CET), Dag Wieers wrote:
Ok, I included i2ctools as part of the OpenELEC build and this is now what
I get:
root ~ # ./i2cdetect -l
i2c-0 smbus SMBus I801 adapter at efa0 SMBus adapter
i2c-1 i2c Afatech AF9015 reference design I2C adapter
i2c-2 i2c NVIDIA i2c adapter 1 at 1:00.0 I2C adapter
i2c-3 i2c NVIDIA i2c adapter 2 at 1:00.0 I2C adapter
root ~ # ./i2cdetect -F 0
Functionalities implemented by /dev/i2c-0:
I2C no
SMBus Quick Command yes
SMBus Send Byte yes
SMBus Receive Byte yes
SMBus Write Byte yes
SMBus Read Byte yes
SMBus Write Word yes
SMBus Read Word yes
SMBus Process Call no
SMBus Block Write yes
SMBus Block Read yes
SMBus Block Process Call no
SMBus PEC yes
I2C Block Write yes
I2C Block Read yes
What's next ?
# ./i2cdetect 0
root ~ # ./i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] Y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- 69 -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Anything I can read to understand the output ?
--
-- dag wieers, dag@xxxxxxxxxx, http://dag.wieers.com/
-- dagit linux solutions, info@xxxxxxxxx, http://dagit.net/
[Any errors in spelling, tact or fact are transmission errors]
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
