On Sun, Dec 02, 2012 at 07:52:37PM +0100, Jean Delvare wrote: > On Sun, 2 Dec 2012 10:26:51 -0800, Guenter Roeck wrote: > > On Sun, Dec 02, 2012 at 06:57:28PM +0100, Jean Delvare wrote: > > > The information I was able to get from my contact at ITE: > > > > > > * The IT8603E does supports hardware monitoring. > > > > > > * The chip has a built-in 8-bit ADC, two thermal inputs with mode > > > selection (thermistor / transistor), 5 external voltage inputs + > > > 3VSB, AVCC3 and VBAT measured internally. It features limits for all > > > measured values (although probably not for VBAT) and fetching of > > > external temperature values over SST/PECI/AMDSTI/PCH SM-Link. > > > > > > * The IT8603E does support automatic fan speed control. > > > > > > * The IT8603E is compatible to some degree with the IT87xxF family. > > > > Will that be good enough for us ? We know way more about IT8771E and IT8772E, > > mostly thanks to the code in coreboot and ohm, yet so far declined to add > > support for it because we don't have data sheets. Or is it time to add support > > for those chips as well, assuming they are compatible to IT8728F ? > > I have no objection if you feel confident. > As confident as we can get w/o datasheets. Only open question is pin assignments, which I assumed to be compatible w/ IT8728F. I sent the patches a minute ago. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
