Am 09.11.2012 15:34, schrieb Guenter Roeck: > On Thu, Nov 08, 2012 at 10:06:07PM +0100, Lars Pötter wrote: >> I use the following configuration file: >> >> chip "nct6776-isa-0290" >> label in1 "+1.9V" >> ignore in4 >> label in5 "+1.66V" >> ignore fan1 >> label fan2 "CPU Fan" >> ignore fan3 >> ignore fan4 >> ignore fan5 >> label SYSTIN "SystemTemperature" >> >> set in1_min 1.9 * 0.90 >> set in1_max 1.9 * 1.10 >> set in5_min 1.66 * 0.90 >> set in5_max 1.66 * 1.10 >> >> set fan2_min 900 * 0.90 >> set fan2_max 3000 * 1.10 >> >> set SYSTIN_min 15 >> set SYSTIN_max 50 >> >> >> But I still get these error reports in syslog: >> >> >> Nov 8 21:54:36 sensord: sensord started >> Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.9V: >> +1.90 V (min = +0.00 V, max = +0.00 V) [ALARM] >> Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.66V: >> +1.66 V (min = +0.00 V, max = +0.00 V) [ALARM] >> Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: CPU Fan: >> 1597 RPM (min = 0 RPM) [ALARM] >> Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: >> 27.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM] >> Nov 8 21:54:36 sensord: Chip: coretemp-isa-0000 >> Nov 8 21:54:36 sensord: Adapter: ISA adapter >> Nov 8 21:54:36 sensord: Physical id 0: 33.0 C >> Nov 8 21:54:36 sensord: Core 0: 26.0 C >> Nov 8 21:54:36 sensord: Core 1: 26.0 C >> Nov 8 21:54:36 sensord: Core 2: 33.0 C >> Nov 8 21:54:36 sensord: Core 3: 25.0 C >> Nov 8 21:54:36 sensord: Chip: nct6776-isa-0290 >> Nov 8 21:54:36 sensord: Adapter: ISA adapter >> Nov 8 21:54:36 sensord: Vcore: +0.99 V (min = +0.00 V, max = +1.74 V) >> Nov 8 21:54:36 sensord: +1.9V: +1.90 V (min = +0.00 V, max = +0.00 V) >> [ALARM] >> Nov 8 21:54:36 sensord: AVCC: +3.42 V (min = +2.98 V, max = +3.63 V) >> Nov 8 21:54:36 sensord: +3.3V: +3.42 V (min = +2.98 V, max = +3.63 V) >> Nov 8 21:54:36 sensord: +1.66V: +1.66 V (min = +0.00 V, max = +0.00 >> V) [ALARM] >> Nov 8 21:54:36 sensord: 3VSB: +3.44 V (min = +2.98 V, max = +3.63 V) >> Nov 8 21:54:36 sensord: Vbat: +3.25 V (min = +2.70 V, max = +3.30 V) >> Nov 8 21:54:36 sensord: CPU Fan: 1597 RPM (min = 0 RPM) [ALARM] >> Nov 8 21:54:36 sensord: SYSTIN: 27.0 C (limit = 0.0 C, hysteresis = >> 0.0 C) [ALARM] >> Nov 8 21:54:36 sensord: CPUTIN: 27.5 C (limit = 80.0 C, hysteresis = >> 75.0 C) >> Nov 8 21:54:36 sensord: AUXTIN: 57.0 C (limit = 80.0 C, hysteresis = >> 75.0 C) >> Nov 8 21:54:36 sensord: PECI Agent 0: 33.0 C >> Nov 8 21:54:36 sensord: cpu0_vid: +2.050 V >> Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.9V: >> +1.90 V (min = +0.00 V, max = +0.00 V) [ALARM] >> Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.66V: >> +1.66 V (min = +0.00 V, max = +0.00 V) [ALARM] >> Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: CPU Fan: >> 1601 RPM (min = 0 RPM) [ALARM] >> Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: >> 27.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM] >> Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.9V: >> +1.91 V (min = +0.00 V, max = +0.00 V) [ALARM] >> Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.66V: >> +1.66 V (min = +0.00 V, max = +0.00 V) [ALARM] >> Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: CPU Fan: >> 1610 RPM (min = 0 RPM) [ALARM] >> Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: >> 27.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM] >> >> /usr/sbin/sensord --version >> sensord version 3.3.1 >> >> So it reads the config file as the labels are used, but the limits are >> not recognized. >> >> I tried to ignore all the conflicting signals but ignoring SYSTIN does >> not work. >> >> What am I doing wrong here? >> > Did you execute sensors -s ? No I did not. Thank you for pointing that out. It helped a bit. As I saw that the fan2_max was not needed. But I can not do any settings for SYSTIN. With such settings I get sensors -s Error: File /etc/sensors.d/B75Pro3, line 20: Unknown feature name nct6776-isa-0290: No such subfeature known an "ignore SYSTIN" is just ignored. I checked https://github.com/groeck/w83627ehf/blob/master/w83627ehf.c but could not detect how I can set the limit and Hysteresis. With this config file: chip "nct6776-isa-0290" label in1 "+1.9V" ignore in4 label in5 "+1.66V" ignore fan1 label fan2 "CPU Fan" ignore fan3 ignore fan4 ignore fan5 ignore SYSTIN set in1_min 1.9 * 0.90 set in1_max 1.9 * 1.10 set in5_min 1.66 * 0.90 set in5_max 1.66 * 1.10 set fan2_min 900 * 0.90 "sensors -s" has nothing to complain but I still get sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 25.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM] I found this: CPUTIN: 24.5 C (limit = 80.0 C, hysteresis = 75.0 C) AUXTIN: 58.0 C (limit = 80.0 C, hysteresis = 75.0 C) but could not find the configuration for CPUTIN AUXTIN ! Are Signals in UPPERCASE special ? Best Regards Lars _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
