I use the following configuration file:
chip "nct6776-isa-0290"
label in1 "+1.9V"
ignore in4
label in5 "+1.66V"
ignore fan1
label fan2 "CPU Fan"
ignore fan3
ignore fan4
ignore fan5
label SYSTIN "SystemTemperature"
set in1_min 1.9 * 0.90
set in1_max 1.9 * 1.10
set in5_min 1.66 * 0.90
set in5_max 1.66 * 1.10
set fan2_min 900 * 0.90
set fan2_max 3000 * 1.10
set SYSTIN_min 15
set SYSTIN_max 50
But I still get these error reports in syslog:
Nov 8 21:54:36 sensord: sensord started
Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.9V:
+1.90 V (min = +0.00 V, max = +0.00 V) [ALARM]
Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.66V:
+1.66 V (min = +0.00 V, max = +0.00 V) [ALARM]
Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: CPU Fan:
1597 RPM (min = 0 RPM) [ALARM]
Nov 8 21:54:36 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN:
27.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Nov 8 21:54:36 sensord: Chip: coretemp-isa-0000
Nov 8 21:54:36 sensord: Adapter: ISA adapter
Nov 8 21:54:36 sensord: Physical id 0: 33.0 C
Nov 8 21:54:36 sensord: Core 0: 26.0 C
Nov 8 21:54:36 sensord: Core 1: 26.0 C
Nov 8 21:54:36 sensord: Core 2: 33.0 C
Nov 8 21:54:36 sensord: Core 3: 25.0 C
Nov 8 21:54:36 sensord: Chip: nct6776-isa-0290
Nov 8 21:54:36 sensord: Adapter: ISA adapter
Nov 8 21:54:36 sensord: Vcore: +0.99 V (min = +0.00 V, max = +1.74 V)
Nov 8 21:54:36 sensord: +1.9V: +1.90 V (min = +0.00 V, max = +0.00 V)
[ALARM]
Nov 8 21:54:36 sensord: AVCC: +3.42 V (min = +2.98 V, max = +3.63 V)
Nov 8 21:54:36 sensord: +3.3V: +3.42 V (min = +2.98 V, max = +3.63 V)
Nov 8 21:54:36 sensord: +1.66V: +1.66 V (min = +0.00 V, max = +0.00
V) [ALARM]
Nov 8 21:54:36 sensord: 3VSB: +3.44 V (min = +2.98 V, max = +3.63 V)
Nov 8 21:54:36 sensord: Vbat: +3.25 V (min = +2.70 V, max = +3.30 V)
Nov 8 21:54:36 sensord: CPU Fan: 1597 RPM (min = 0 RPM) [ALARM]
Nov 8 21:54:36 sensord: SYSTIN: 27.0 C (limit = 0.0 C, hysteresis =
0.0 C) [ALARM]
Nov 8 21:54:36 sensord: CPUTIN: 27.5 C (limit = 80.0 C, hysteresis =
75.0 C)
Nov 8 21:54:36 sensord: AUXTIN: 57.0 C (limit = 80.0 C, hysteresis =
75.0 C)
Nov 8 21:54:36 sensord: PECI Agent 0: 33.0 C
Nov 8 21:54:36 sensord: cpu0_vid: +2.050 V
Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.9V:
+1.90 V (min = +0.00 V, max = +0.00 V) [ALARM]
Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.66V:
+1.66 V (min = +0.00 V, max = +0.00 V) [ALARM]
Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: CPU Fan:
1601 RPM (min = 0 RPM) [ALARM]
Nov 8 21:55:36 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN:
27.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.9V:
+1.91 V (min = +0.00 V, max = +0.00 V) [ALARM]
Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: +1.66V:
+1.66 V (min = +0.00 V, max = +0.00 V) [ALARM]
Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: CPU Fan:
1610 RPM (min = 0 RPM) [ALARM]
Nov 8 21:56:36 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN:
27.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
/usr/sbin/sensord --version
sensord version 3.3.1
So it reads the config file as the labels are used, but the limits are
not recognized.
I tried to ignore all the conflicting signals but ignoring SYSTIN does
not work.
What am I doing wrong here?
Best Regards
Lars
PS: I'm not subscribed to the list so please CC me.
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
