Re: f71882fg not showing motherboard temps

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 11/01/2012 05:03 PM, Logan Freijo wrote:
On 11/1/2012 12:49 AM, Guenter Roeck wrote:
On Wed, Oct 31, 2012 at 06:37:01PM -0400, Logan Freijo wrote:
**Hello. I have a system running Ubuntu Server 12.04.1 on a Jetway
motherboard. Sensors-detect finds my AMD cpu temp and a chip for the
motherboard (f71882fg). However, after adding the suggested line to
/etc/modules and rebooting, only the cpu temp shows up using the
sensors command. I have tried acpi-enforce-resources=lax with no
effect. I have tried searching the internet for an answer and I find
none. Below is the information requested in the FAQ.  I would like
to note that this is not a new problem, it has been ongoing since I
bought the motherboard in Jan 2011.

Any help would be appreciated.

Logan


*

Motherboard vendor and model*
     JetWay JHZ03-GT-LF

*Lm_sensors and kernel versions*
     sensors version 3.3.1 with libsensors version 3.3.1
     3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012
x86_64 x86_64 x86_64 GNU/Linux

*The output of sensors*
     k10temp-pci-00c3
     Adapter: PCI adapter
     CPU Temp:     +26.0 C  (high = +70.0 C)

*The dmesg or syslog output if applicable*
     kernel: [    8.795196] f71882fg: Found f71882fg chip at 0x220,
revision 32
     kernel: [    8.795228] f71882fg.544: failed to claim resource 0
     kernel: [    8.795233] f71882fg: Device addition failed

Hi,

An old post suggests that you may be able to work around the problem by booting
with "pnpacpi=off", and that the problem might be due to a BIOS problem.
See http://lists.lm-sensors.org/pipermail/lm-sensors/2009-January/025175.html
and subsequent posts for additional details.

Might be worth a try.

Guenter

*The output of (as root) sensors-detect*
# sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
# System: To Be Filled By O.E.M. To Be Filled By O.E.M.
# Board: JETWAY HZ03-GT

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           Success!
     (driver `k10temp')
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 15h power sensors...                             No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Fintek F71882FG/F71883FG Super IO Sensors'           Success!
     (address 0x225, driver `f71882fg')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies
Inc SB600/SB700/SB800 SMBus
Module i2c-dev loaded successfully.

Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                Yes
     (confidence 8, not a hardware monitoring chip)

Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (YES/no/selectively):

Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (YES/no/selectively):

Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (YES/no/selectively):

Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (YES/no/selectively):

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `k10temp' (autoloaded):
   * Chip `AMD Family 10h thermal sensors' (confidence: 9)

Driver `f71882fg':
   * ISA bus, address 0x225
     Chip `Fintek F71882FG/F71883FG Super IO Sensors' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
f71882fg
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)n

Unloading i2c-dev... OK
Unloading cpuid... OK

*The output of lsmod*

Module                  Size  Used by
cifs                  287317  0
ext2                   73795  1
dm_multipath           23230  0
psmouse                97443  0
edac_core              53746  0
radeon                804460  1
serio_raw              13211  0
k10temp                13166  0
edac_mce_amd           23709  0
ttm                    76949  1 radeon
sp5100_tco             13791  0
drm_kms_helper         46978  1 radeon
joydev                 17693  0
i2c_piix4              13301  0
drm                   241921  3 radeon,ttm,drm_kms_helper
i2c_algo_bit           13423  1 radeon
mac_hid                13253  0
shpchp                 37277  0
wmi                    19256  0
lp                     17799  0
parport                46562  1 lp
usbhid                 47199  1
hid                    99559  1 usbhid
r8169                  62099  0
pata_atiixp            13204  4
dm_raid45              78155  0
xor                    12894  1 dm_raid45
dm_mirror              22203  0
dm_region_hash         20918  1 dm_mirror
dm_log                 18564  3 dm_raid45,dm_mirror,dm_region_hash

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Thanks for the suggestion Guenter. I did see that post. I added pnpacpi=off to the boot options and it had no effect. I also tried pnpbios=off and pnp_reserve_io with no effect. The temperatures and voltages are displayed in bios and could also be read by several popular windows 7 programs. I am not planing on switch back to windows, but I would like to monitor the temps.

Can you do a "cat /proc/ioports" and send us the output?

That may help to figure out what is causing the io conflict.

Regards,

Hans

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux