On Tue, 2 Oct 2012 15:05:26 +0200, Peter Meerwald wrote: > From: Peter Meerwald <p.meerwald@xxxxxxxxxxxxxxxxxx> > > Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx> > --- > Documentation/hwmon/da9052 | 2 +- > Documentation/hwmon/twl4030-madc-hwmon | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052 > index ef89855..5bc5134 100644 > --- a/Documentation/hwmon/da9052 > +++ b/Documentation/hwmon/da9052 > @@ -56,6 +56,6 @@ The junction temperature is calculated: > The junction temperature attribute is supported by the driver. > > The battery temperature is calculated: > - Degree Celcius = 1 / (t1 + 1/298)- 273 > + Degree Celsius = 1 / (t1 + 1/298)- 273 > where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) > Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively. > diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon > index ef79843..215babd 100644 > --- a/Documentation/hwmon/twl4030-madc-hwmon > +++ b/Documentation/hwmon/twl4030-madc-hwmon > @@ -41,5 +41,5 @@ Channel Signal > > The Sysfs nodes will represent the voltage in the units of mV, > the temperature channel shows the converted temperature in > -degree celcius. The Battery charging current channel represents > +degree celsius. The Battery charging current channel represents > battery charging current in mA. Applied, thanks. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
