From: Peter Meerwald <p.meerwald@xxxxxxxxxxxxxxxxxx> Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx> --- Documentation/hwmon/da9052 | 2 +- Documentation/hwmon/twl4030-madc-hwmon | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052 index ef89855..5bc5134 100644 --- a/Documentation/hwmon/da9052 +++ b/Documentation/hwmon/da9052 @@ -56,6 +56,6 @@ The junction temperature is calculated: The junction temperature attribute is supported by the driver. The battery temperature is calculated: - Degree Celcius = 1 / (t1 + 1/298)- 273 + Degree Celsius = 1 / (t1 + 1/298)- 273 where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively. diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon index ef79843..215babd 100644 --- a/Documentation/hwmon/twl4030-madc-hwmon +++ b/Documentation/hwmon/twl4030-madc-hwmon @@ -41,5 +41,5 @@ Channel Signal The Sysfs nodes will represent the voltage in the units of mV, the temperature channel shows the converted temperature in -degree celcius. The Battery charging current channel represents +degree celsius. The Battery charging current channel represents battery charging current in mA. -- 1.7.9.5 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
