On Sat, Sep 15, 2012 at 09:46:11AM +0300, Jonas Vasiliauskas wrote: > Hi there, > > I hope you are doing well. Is there full support for intel h77 chip > ? I'm able to read temperatures using coretemp module, but can't > anyhow read fan speeds, not sure, maybe there is no support on > sensors for this chip ? Its one of the most decent, but not sure, > maybe you guys know how to get fan RPMs on console ? ;) > First of all, that is not a H77 (PCH) question, but a board question, and primarily depends on the SuperIO chip used on your board. Also, your board specification will tell you if the board uses the SuperIO chip or MEI for fan control. You might want to try running the latest version of sensors-detect (from http://www.lm-sensors.org/wiki/Download). That should tell you which SuperIO chip is used. Intel often uses Nuvoton NCT6775F. If so, use the driver at https://github.com/groeck/nct6775 and check if it handles fan control. If it does, you are lucky. If not, fan control may be handled by MEI (again, your motherboard specification should tell you that). In that case, you'll have to wait for someone to write a MEI fan control driver (or write one yourself ;). Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
