-----Messaggio originale-----
From: Guenter Roeck
Sent: Saturday, September 08, 2012 7:55 PM
To: Fabio Cecamore
Cc: lm-sensors@xxxxxxxxxxxxxx
Subject: Re: lm-sensors and ipmisensors
On Sat, Sep 08, 2012 at 07:35:16PM +0200, Fabio Cecamore wrote:
Thanks for you reply, i tryed yet but this is the results:
root@ProLiant:~# ipmi-sensors
could not find inband device
root@ProLiant:~# ipmi-sensors-config --checkout
could not find inband device
root@ProLiant:~#
I think need driver
Please don't top-post.
I suspect you might need to configure it correctly. Unfortunately, I can
not
help you there - I have no idea what is needed to get it working. Try the
freeipmi mailing list (freeipmi-users@xxxxxxx).
Thanks,
Guenter
Ok i will write they too
So there is no way to use lm_sensors ? And why ?
-----Messaggio originale----- From: Guenter Roeck
Sent: Saturday, September 08, 2012 6:59 PM
To: Fabio Cecamore
Cc: lm-sensors@xxxxxxxxxxxxxx
Subject: Re: lm-sensors and ipmisensors
On Sat, Sep 08, 2012 at 03:40:17PM +0200, Fabio Cecamore wrote:
>Hello all,
>i’m trying to use lm-sensors on my proliant server but lm-sensors
>tell me i need ipmisensors driver but.. i don’t find it everywhere
>
>Searching in the modules (or kernel config) the only ipmi i find are
>this:
>
>/lib/modules/3.2.23-rt37/kernel/drivers/acpi/acpi_ipmi.ko
>/lib/modules/3.2.23-rt37/kernel/drivers/char/ipmi
>/lib/modules/3.2.23-rt37/kernel/drivers/char/ipmi/ipmi_devintf.ko
>/lib/modules/3.2.23-rt37/kernel/drivers/char/ipmi/ipmi_msghandler.ko
>/lib/modules/3.2.23-rt37/kernel/drivers/char/ipmi/ipmi_watchdog.ko
>/lib/modules/3.2.23-rt37/kernel/drivers/char/ipmi/ipmi_poweroff.ko
>/lib/modules/3.2.23-rt37/kernel/drivers/char/ipmi/ipmi_si.ko
>
>but when i try to load some in dmesg:
>
>[81194.672773] ipmi message handler version 39.2
>[81209.130189] IPMI System Interface driver.
>[81209.130277] ipmi_si: probing via SMBIOS
>[81209.130285] ipmi_si: SMBIOS: mem 0x0 regsize 1 spacing 1 irq 0
>[81209.130292] ipmi_si: Adding SMBIOS-specified kcs state machine
>[81209.130301] ipmi_si: probing via SPMI
>[81209.130308] ipmi_si: SPMI: mem 0x0 regsize 1 spacing 1 irq 0
>[81209.130313] ipmi_si: Adding SPMI-specified smic state machine
>duplicate interface
>[81209.130323] ipmi_si: Trying SMBIOS-specified kcs state machine at
>mem address 0x0, slave address 0x20, irq 0
>[81209.130331] ipmi_si: Could not set up I/O space
>
>and sensors don't find nothing..
>
>Where can i find this driver ?
Try the freeipmi-tools package. It includes ipmi-sensors which might do
the
trick.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
