On Tue, Jun 05, 2012 at 05:38:31PM -0400, Ger vermeulen wrote: > > > > -----Original Message----- > > From: lm-sensors-bounces@xxxxxxxxxxxxxx [mailto:lm-sensors-bounces@lm- > > sensors.org] On Behalf Of Guenter Roeck > > Sent: Tuesday, 05 June, 2012 23:22 > > To: Ger vermeulen > > Cc: lm-sensors@xxxxxxxxxxxxxx > > Subject: Re: System: "Point of View ION-MB330-1" produces > > wrong values with lm-sensors 3.3.2 > > > > On Tue, Jun 05, 2012 at 05:05:23PM -0400, Ger vermeulen wrote: > > > > > > > > > > -----Original Message----- > > > > From: lm-sensors-bounces@xxxxxxxxxxxxxx [mailto:lm-sensors-bounces@lm- > > > > sensors.org] On Behalf Of Guenter Roeck > > > > Sent: Tuesday, 05 June, 2012 22:34 > > > > To: geve002@xxxxxxxxx > > > > Cc: lm-sensors@xxxxxxxxxxxxxx > > > > Subject: Re: System: "Point of View ION-MB330-1" produces > > > > wrong values with lm-sensors 3.3.2 > > > > > > > > On Tue, 2012-06-05 at 15:10 -0400, Ger vermeulen wrote: > > > > > > > > [ ... ] > > > > > > > > > > > > > > The workaround you suggested to change the tjmax is not possible for > > my > > > > > coretemp.ko unknown symbol. > > > > > > > > > Not sure I understand. What command do you execute, and what exactly > > is > > > > the output ? > > > > > > > > > So a work around can be adding to /etc/sensors3.conf > > > > > > > > > > chip "coretemp-isa-0000" > > > > > label temp1 "Core0" > > > > > compute temp1 @+35,@-35 > > > > > > > > > > chip "coretemp-isa-0001" > > > > > label temp1 "Core1" > > > > > compute temp1 @+35,@-35 > > > > > > > > > > Is this correct? > > > > > > > > > It shows you the correct temperature. So, yes, it is one way to solve > > > > the problem. Do you really need the "label" line ? > > > > > > > > Thanks, > > > > Guenter > > > > > > > > > > > > > > > > _______________________________________________ > > > > lm-sensors mailing list > > > > lm-sensors@xxxxxxxxxxxxxx > > > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > > > > > > > > > > > root@atom:~# insmod > > > /lib/modules/2.6.37.6-smp/kernel/drivers/hwmon/coretemp.ko tjmax=125 > > > insmod: error inserting > > > '/lib/modules/2.6.37.6-smp/kernel/drivers/hwmon/coretemp.ko': -1 Unknown > > > symbol in module > > > > > Try "modprobe coretemp force_tjmax=125" instead. > > > > Guenter > > > > > > _______________________________________________ > > lm-sensors mailing list > > lm-sensors@xxxxxxxxxxxxxx > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > root@atom:/etc# modprobe coretemp force_tjmax=125 > FATAL: Error inserting coretemp > (/lib/modules/2.6.37.6-smp/kernel/drivers/hwmon/coretemp.ko): Unknown symbol > in module, or unknown parameter (see dmesg) > Sorry, I just noticed that the parameter was added in a later kernel version. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
