On Tue, Mar 13, 2012 at 04:07:53AM -0400, Jean Delvare wrote: > On Thu, 9 Feb 2012 08:57:23 -0800, Guenter Roeck wrote: > > Add description of pwm[1-4]_start_output, pwm[1-4]_step_output, > > pwm[1-4]_stop_output, and pwm[1-4]_max_output attributes to driver > > documentation. > > Would be nice to have these standardized at some point... But meanwhile > I agree it's best described in the driver documentation file. > > > Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> > > --- > > Documentation/hwmon/w83627ehf | 5 +++++ > > 1 files changed, 5 insertions(+), 0 deletions(-) > > > > diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf > > index 3f44dbd..ea75fe4 100644 > > --- a/Documentation/hwmon/w83627ehf > > +++ b/Documentation/hwmon/w83627ehf > > @@ -143,6 +143,11 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature > > pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch > > corresponding fan off. (when the temperature was below > > defined range). > > +pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up > > +pwm[1-4]_step_output- rate of fan speed change (1 - 255) > > +pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down > > +pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature > > + is above defined range. > > > > Note: last two functions are influenced by other control bits, not yet exported > > "last two" should probably become "last six". > > > by the driver, so a change might not have any effect. > > Other than this: > > Acked-by: Jean Delvare <khali@xxxxxxxxxxxx> > Thanks, updated and applied. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
