Properly set the source of temp2 for the W83627UHG. Also fix a
comment right before that, and document the W83627UHG as reporting up
to 3 temperatures.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
Cc: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
Documentation/hwmon/w83627ehf | 2 +-
drivers/hwmon/w83627ehf.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
--- linux-3.3-rc7.orig/drivers/hwmon/w83627ehf.c 2012-03-13 08:44:34.000000000 +0100
+++ linux-3.3-rc7/drivers/hwmon/w83627ehf.c 2012-03-13 08:46:26.824677268 +0100
@@ -39,7 +39,7 @@
0x8860 0xa1
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3
- w83627uhg 8 2 2 2 0xa230 0xc1 0x5ca3
+ w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3
w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3
nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3
@@ -2157,16 +2157,16 @@ static int __devinit w83627ehf_probe(str
w83627ehf_set_temp_reg_ehf(data, 3);
/*
- * Temperature sources for temp1 and temp2 are selected with
+ * Temperature sources for temp2 and temp3 are selected with
* bank 0, registers 0x49 and 0x4a.
*/
data->temp_src[0] = 0; /* SYSTIN */
reg = w83627ehf_read_value(data, 0x49) & 0x07;
/* Adjust to have the same mapping as other source registers */
if (reg == 0)
- data->temp_src[1]++;
+ data->temp_src[1] = 1;
else if (reg >= 2 && reg <= 5)
- data->temp_src[1] += 2;
+ data->temp_src[1] = reg + 2;
else /* should never happen */
data->have_temp &= ~(1 << 1);
reg = w83627ehf_read_value(data, 0x4a);
--- linux-3.3-rc7.orig/Documentation/hwmon/w83627ehf 2012-02-11 22:51:12.000000000 +0100
+++ linux-3.3-rc7/Documentation/hwmon/w83627ehf 2012-03-13 08:55:43.282772621 +0100
@@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W8366
(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
as Winbond chips.
-The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
(except for 627UHG), alarms with beep warnings (control unimplemented),
and some automatic fan regulation strategies (plus manual fan control mode).
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
