On Thu, 16 Feb 2012 20:29:04 -0800, Kenneth Cox wrote:> (...)
> Thanks for the response. I downloaded the new sensors-detect script and ran
> it. I also installed Roeck's driver. Here is the output of sensors-detect:
>
> # sensors-detect revision 6022 (2012-02-16 07:44:31 +0100)
> # Board: ASRock A75M-HVS
> Now follows a summary of the probes I have just done.Did you restart the lm_sensors service after that? sensors-detect only
> Just press ENTER to continue:
>
> Driver `w83627ehf':
> * ISA bus, address 0x290
> Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)
>
> Driver `k10temp' (autoloaded):
> * Chip `AMD Family 12h and 14h thermal sensors' (confidence: 9)
>
> Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no):
> Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
> for initialization at boot time.
> You should now start the lm_sensors service to load the required
> kernel modules.
>
> Unloading i2c-dev... OK
> Unloading cpuid... OK
>
> But sensors does not give any more info:
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1: +9.6°C (high = +70.0°C)
> (crit = +70.0°C, hyst = +69.0°C)
>
>
> Am I missing something?
detects which drivers are needed, it doesn't load them for you.
How do you restart lm_sensors? I just rebooted and assumed that would restart it ok.
If you still don't get more values even after that, check the kernel
log for error messages.
I don't know what I'm looking for in the kernel log. I searched the log for "sensors" and came up with nothing. What should I be looking for?
--
Jean Delvare
Thanks for all your help on this.
Ken
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
