On Wed, Feb 08, 2012 at 11:00:43AM -0800, Guenter Roeck wrote:
> On Wed, 2012-02-08 at 12:56 -0500, Nikolaus Schulz wrote:
> > From: Nikolaus Schulz <schulz@xxxxxxxxxxx>
> >
> > Treat pwmX as a measured value, not as a (mostly static) limit value, so
> > that it is updated more frequently from the device register.
> >
> > Signed-off-by: Nikolaus Schulz <mail@xxxxxxxxxxxxxx>
> > ---
> > drivers/hwmon/f75375s.c | 5 ++---
> > 1 files changed, 2 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
> > index 0aabaaf..f609b57 100644
> > --- a/drivers/hwmon/f75375s.c
> > +++ b/drivers/hwmon/f75375s.c
> > @@ -200,9 +200,6 @@ static struct f75375_data *f75375_update_device(struct device *dev)
> > f75375_read16(client, F75375_REG_FAN_MIN(nr));
> > data->fan_target[nr] =
> > f75375_read16(client, F75375_REG_FAN_EXP(nr));
> > - data->pwm[nr] = f75375_read8(client,
> > - F75375_REG_FAN_PWM_DUTY(nr));
> > -
> > }
> > for (nr = 0; nr < 4; nr++) {
> > data->in_max[nr] =
> > @@ -218,6 +215,8 @@ static struct f75375_data *f75375_update_device(struct device *dev)
> > if (time_after(jiffies, data->last_updated + 2 * HZ)
> > || !data->valid) {
> > for (nr = 0; nr < 2; nr++) {
> > + data->pwm[nr] = f75375_read8(client,
> > + F75375_REG_FAN_PWM_DUTY(nr));
> > /* assign MSB, therefore shift it by 8 bits */
> > data->temp11[nr] =
> > f75375_read8(client, F75375_REG_TEMP(nr)) << 8;
>
> This also fixes a bug where pwm was not read at all if there is no
> platform data.
I don't think so, but anyways...
> Doesn't apply to -stable, since support for automatic
> startup (no platform data) was only added recently, but still ...
(stable@xxxxxxxxxx wasn't cc'ed here.)
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
