Hello.
I want to expose a problem I have met with pwmconfig.
With ubuntu 10.11, the pwmconfig complains there is no
available system for monitoring the cpu fan.
With the last kernel in Archlinux, I have the same problem.
With the LTS kernel in archlinux (3.0), the problem
disappears, everything works fine.
I cannot understand why with the 3.0 kernel, I have a bug in ubuntu
and not in archlinux (because the API should not to be broken).
In archlinux it is the two following versions :
local/linux-lts 3.0.17-2
local/linux 3.2.2-1 (base)
In ubuntu 10.11, the kernel is :
3.0.0-15-generic-pae #26-Ubuntu SMP Fri Jan 20 17:07:31 UTC 2012 i686
i686 i386 GNU/Linux
When it fails, it seems that the coretemp interface is loaded, and I can
see the cpu temp
in both cases (when fancontrol fails and when it doesn't fail), but only
the cpu temp.
When it doesn't fail, I have another interface which manage all the
sensors of my motherboard,
including the control of fans (I can have up to 4 fans controlled). I am
going to be a bit
approximative, but the interface being loaded when it works is called
"netxxxx" where the "xxxx"
is some number. I could tell you more about this point the next time I
boot the archlinux LTS kernel.
My motherboard is H67 chipset :
http://www.asus.com/Motherboards/Intel_Socket_1155/P8H67M_LE/
I hope this helps to solve my problem
Thank you very much.
D.
# libsensors configuration file
# -----------------------------
#
# This default configuration file only includes statements which do not
# differ from one mainboard to the next. Only label, compute and set
# statements for internal voltage and temperature sensors are included.
#
# In general, local changes should not be added to this file, but rather
# placed in custom configuration files located in /etc/sensors.d. This
# approach makes further updates much easier.
#
# Such custom configuration files for specific mainboards can be found at
# http://www.lm-sensors.org/wiki/Configurations
chip "lm78-*" "lm79-*" "lm80-*"
label temp1 "M/B Temp"
chip "w83792d-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in6 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in6_min 5.0 * 0.90
set in6_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "w83793-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in7 "+5V"
label in8 "5VSB"
label in9 "Vbat"
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 5.0 * 0.90
set in8_max 5.0 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
chip "w83795g-*" "w83795adg-*"
label in12 "+3.3V"
label in13 "3VSB"
label in14 "Vbat"
set in12_min 3.3 * 0.90
set in12_max 3.3 * 1.10
set in13_min 3.3 * 0.90
set in13_max 3.3 * 1.10
set in14_min 3.0 * 0.90
set in14_max 3.3 * 1.10
chip "via686a-*"
label in0 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
chip "adm1025-*" "ne1619-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp1 "CPU Temp"
label temp2 "M/B Temp"
chip "lm87-*" "adm1024-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
label temp1 "M/B Temp"
label temp2 "CPU Temp"
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
label in8 "Vbat"
chip "fscpos-*" "fscher-*"
#FSC "Hermes"
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label temp1 "CPU Temp"
label temp2 "M/B Temp"
label temp3 "Aux Temp"
chip "fscscy-*"
#FSC "Scylla"
label in0 "+12V"
label in1 "+5V"
label in2 "+3.3V"
label temp1 "CPU0 Temp"
label temp2 "CPU1 Temp"
label temp3 "M/B Temp"
label temp4 "Aux Temp"
chip "fschds-*"
# Fujitsu Technology Solutions, "Hades"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp2 "Super I/O Temp"
label temp3 "System Temp"
# Fans
label fan1 "PSU Fan"
label fan2 "CPU Fan"
label fan3 "System FAN2"
label fan4 "System FAN3"
label fan5 "System FAN4"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
chip "fscsyl-*"
# Fujitsu Technology Solutions, "Syleus"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp4 "Super I/O Temp"
label temp5 "Northbridge Temp"
# Fans
label fan1 "CPU Fan"
label fan2 "System FAN2"
label fan3 "System FAN3"
label fan4 "System FAN4"
label fan7 "PSU Fan"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label in3 "+3.3V"
label in5 "+3.3V-Aux"
chip "vt1211-*"
label in5 "+3.3V"
label temp2 "SIO Temp"
chip "vt8231-*"
label in5 "+3.3V"
chip "smsc47m192-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
label temp1 "SIO Temp"
chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" \
"emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
chip "emc6w201-*"
label in2 "+3.3V"
label in3 "+5V"
label temp6 "M/B Temp"
chip "pc87365-*" "pc87366-*"
# Voltage inputs
label in7 "3VSB"
label in8 "VDD"
label in9 "Vbat"
label in10 "AVDD"
compute in7 @*2, @/2
compute in8 @*2, @/2
compute in10 @*2, @/2
# These are the operating conditions as recommended by National
# Semiconductor
set in7_min 3.0
set in7_max 3.6
set in8_min 3.0
set in8_max 3.6
set in10_min 3.0
set in10_max 3.6
# Depending on the hardware setup, the battery voltage may or may not
# be monitored.
# set in9_min 2.4
# set in9_max 3.6
label temp3 "SIO Temp"
set temp3_min 0
set temp3_max 70
set temp3_crit 85
chip "adm1030-*" "adm1031-*"
label temp1 "M/B Temp"
chip "w83627thf-*"
label in3 "+5V"
label in7 "5VSB"
label in8 "Vbat"
# Internal resistors
compute in3 @ * (1 + 34/51), @ / (1 + 34/51)
compute in7 @ * (1 + 34/51), @ / (1 + 34/51)
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
# The battery voltage may or may not be monitored.
# set in8_min 3.0 * 0.90
# set in8_max 3.0 * 1.10
chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
label in0 "Vcore"
label in2 "AVCC"
label in3 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 3.3 * 0.90
set in3_max 3.3 * 1.10
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "w83627uhg-*"
label in2 "AVCC"
label in3 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in2_min 5.0 * 0.90
set in2_max 5.0 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "f71805f-*"
label in0 "+3.3V"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
chip "f71872f-*"
label in0 "+3.3V"
label in9 "Vbat"
label in10 "3VSB"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
set in10_min 3.3 * 0.90
set in10_max 3.3 * 1.10
chip "k8temp-*"
label temp1 "Core0 Temp"
label temp2 "Core0 Temp"
label temp3 "Core1 Temp"
label temp4 "Core1 Temp"
chip "dme1737-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch311x-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5027-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5127-*"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "f71808e-*" "f71808a-*" "f71862fg-*" "f71869-*" "f71869a-*" "f71882fg-*" \
"f71889fg-*" "f71889ed-*" "f71889a-*"
label in0 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
compute in0 @*2, @/2
compute in7 @*2, @/2
compute in8 @*2, @/2
chip "f71858fg-*" "f8000-*"
label in0 "+3.3V"
label in1 "3VSB"
label in2 "Vbat"
compute in0 @*2, @/2
compute in1 @*2, @/2
compute in2 @*2, @/2
chip "f81865f-*"
label in0 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
compute in0 @*2, @/2
compute in5 @*2, @/2
compute in6 @*2, @/2
chip "adt7473-*" "adt7475-*"
label in2 "+3.3V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
label temp2 "Board Temp"
chip "adt7476-*" "adt7490-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your ADT7476 is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
# libsensors configuration file
# -----------------------------
#
# This default configuration file only includes statements which do not
# differ from one mainboard to the next. Only label, compute and set
# statements for internal voltage and temperature sensors are included.
#
# In general, local changes should not be added to this file, but rather
# placed in custom configuration files located in /etc/sensors.d. This
# approach makes further updates much easier.
#
# Such custom configuration files for specific mainboards can be found at
# http://www.lm-sensors.org/wiki/Configurations
chip "lm78-*" "lm79-*" "lm80-*"
label temp1 "M/B Temp"
chip "w83792d-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in6 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in6_min 5.0 * 0.90
set in6_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "w83793-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in7 "+5V"
label in8 "5VSB"
label in9 "Vbat"
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 5.0 * 0.90
set in8_max 5.0 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
chip "w83795g-*" "w83795adg-*"
label in12 "+3.3V"
label in13 "3VSB"
label in14 "Vbat"
set in12_min 3.3 * 0.90
set in12_max 3.3 * 1.10
set in13_min 3.3 * 0.90
set in13_max 3.3 * 1.10
set in14_min 3.0 * 0.90
set in14_max 3.3 * 1.10
chip "via686a-*"
label in0 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
chip "adm1025-*" "ne1619-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp1 "CPU Temp"
label temp2 "M/B Temp"
chip "lm87-*" "adm1024-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
label temp1 "M/B Temp"
label temp2 "CPU Temp"
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
label in8 "Vbat"
chip "fscpos-*" "fscher-*"
#FSC "Hermes"
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label temp1 "CPU Temp"
label temp2 "M/B Temp"
label temp3 "Aux Temp"
chip "fscscy-*"
#FSC "Scylla"
label in0 "+12V"
label in1 "+5V"
label in2 "+3.3V"
label temp1 "CPU0 Temp"
label temp2 "CPU1 Temp"
label temp3 "M/B Temp"
label temp4 "Aux Temp"
chip "fschds-*"
# Fujitsu Technology Solutions, "Hades"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp2 "Super I/O Temp"
label temp3 "System Temp"
# Fans
label fan1 "PSU Fan"
label fan2 "CPU Fan"
label fan3 "System FAN2"
label fan4 "System FAN3"
label fan5 "System FAN4"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
chip "fscsyl-*"
# Fujitsu Technology Solutions, "Syleus"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp4 "Super I/O Temp"
label temp5 "Northbridge Temp"
# Fans
label fan1 "CPU Fan"
label fan2 "System FAN2"
label fan3 "System FAN3"
label fan4 "System FAN4"
label fan7 "PSU Fan"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label in3 "+3.3V"
label in5 "+3.3V-Aux"
chip "vt1211-*"
label in5 "+3.3V"
label temp2 "SIO Temp"
chip "vt8231-*"
label in5 "+3.3V"
chip "smsc47m192-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
label temp1 "SIO Temp"
chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" \
"emc6d100-*" "emc6d102-*" "emc6d103-*" "emc6d103s-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
chip "emc6w201-*"
label in2 "+3.3V"
label in3 "+5V"
label temp6 "M/B Temp"
chip "pc87365-*" "pc87366-*"
# Voltage inputs
label in7 "3VSB"
label in8 "VDD"
label in9 "Vbat"
label in10 "AVDD"
compute in7 @*2, @/2
compute in8 @*2, @/2
compute in10 @*2, @/2
# These are the operating conditions as recommended by National
# Semiconductor
set in7_min 3.0
set in7_max 3.6
set in8_min 3.0
set in8_max 3.6
set in10_min 3.0
set in10_max 3.6
# Depending on the hardware setup, the battery voltage may or may not
# be monitored.
# set in9_min 2.4
# set in9_max 3.6
label temp3 "SIO Temp"
set temp3_min 0
set temp3_max 70
set temp3_crit 85
chip "adm1030-*" "adm1031-*"
label temp1 "M/B Temp"
chip "w83627thf-*"
label in3 "+5V"
label in7 "5VSB"
label in8 "Vbat"
# Internal resistors
compute in3 @ * (1 + 34/51), @ / (1 + 34/51)
compute in7 @ * (1 + 34/51), @ / (1 + 34/51)
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
# The battery voltage may or may not be monitored.
# set in8_min 3.0 * 0.90
# set in8_max 3.0 * 1.10
chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
label in0 "Vcore"
label in2 "AVCC"
label in3 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 3.3 * 0.90
set in3_max 3.3 * 1.10
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "w83627uhg-*"
label in2 "AVCC"
label in3 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in2_min 5.0 * 0.90
set in2_max 5.0 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "f71805f-*"
label in0 "+3.3V"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
chip "f71872f-*"
label in0 "+3.3V"
label in9 "Vbat"
label in10 "3VSB"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
set in10_min 3.3 * 0.90
set in10_max 3.3 * 1.10
chip "k8temp-*"
label temp1 "Core0 Temp"
label temp2 "Core0 Temp"
label temp3 "Core1 Temp"
label temp4 "Core1 Temp"
chip "dme1737-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch311x-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5027-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5127-*"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "f71808e-*" "f71808a-*" "f71862fg-*" "f71869-*" "f71869a-*" "f71882fg-*" \
"f71889fg-*" "f71889ed-*" "f71889a-*"
label in0 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
compute in0 @*2, @/2
compute in7 @*2, @/2
compute in8 @*2, @/2
chip "f71858fg-*" "f8000-*"
label in0 "+3.3V"
label in1 "3VSB"
label in2 "Vbat"
compute in0 @*2, @/2
compute in1 @*2, @/2
compute in2 @*2, @/2
chip "f81865f-*"
label in0 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
compute in0 @*2, @/2
compute in5 @*2, @/2
compute in6 @*2, @/2
chip "adt7473-*" "adt7475-*"
label in2 "+3.3V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
label temp2 "Board Temp"
chip "adt7476-*" "adt7490-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your ADT7476 is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/w83627ehf.656
DEVNAME=hwmon0=coretemp hwmon1=nct6776
FCTEMPS= hwmon1/device/pwm2=hwmon0/device/temp1_input
FCFANS= hwmon1/device/pwm2=hwmon1/device/fan2_input
MINTEMP= hwmon1/device/pwm2=30
MAXTEMP= hwmon1/device/pwm2=70
MINSTART= hwmon1/device/pwm2=150
MINSTOP= hwmon1/device/pwm2=50
MINPWM=hwmon1/device/pwm2=45
MAXPWM=hwmon1/device/pwm2=135
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
