On Wed, 2012-01-25 at 16:13 -0500, Guenter Roeck wrote: > On Wed, 2012-01-25 at 13:12 -0500, CC wrote: > > I'm using Arch Linux with kernel 3.2.1. > > > > sensors-detect (all YES) came up with coretemp and w83627ehf. > > However, the mainboard (in the UEFI BIOS and, judging by screenshots, > > in Windows, and by the manual) can monitor a third fan, 12V, 7V and > > 5V. > > > > I get spurious voltage readings from sensors, however: > > > > nct6776-isa-0290 > > Adapter: ISA adapter > > Vcore: +0.75 V (min = +0.00 V, max = +1.74 V) > > in1: +1.87 V (min = +0.00 V, max = +0.00 V) ALARM > > AVCC: +3.38 V (min = +2.98 V, max = +3.63 V) > > +3.3V: +3.36 V (min = +2.98 V, max = +3.63 V) > > in4: +0.06 V (min = +0.00 V, max = +0.00 V) ALARM > > in5: +1.68 V (min = +0.00 V, max = +0.00 V) ALARM > > 3VSB: +3.47 V (min = +2.98 V, max = +3.63 V) > > Vbat: +3.30 V (min = +2.70 V, max = +3.30 V) ALARM > > fan1: 0 RPM (min = 0 RPM) ALARM > > fan2: 1419 RPM (min = 0 RPM) ALARM > > SYSTIN: +36.0°C (high = +0.0°C, hyst = +0.0°C) ALARM > > sensor = thermistor > > CPUTIN: +34.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > > AUXTIN: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > > PECI Agent 0: +36.0°C > > cpu0_vid: +2.050 V > > intrusion0: ALARM > > intrusion1: ALARM > > > > Is the mainboard not yet supported, or do I have to configure > > something differently? > > You'll have to adjust voltages in /etc/sensors3.conf. > > Looking into the datasheet, the chip has a second set of fan input > select registers. Please try the code in the "testing" branch in the > w83627ehf repository to see if that fixes the problem with the fans. > Fat fingers. The above refers to the 'testing' branch in my w83627ehf repository on github. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
