On Sun, 22 Jan 2012 13:11:36 -0800, Guenter Roeck wrote: > On Sun, Jan 22, 2012 at 01:43:08PM -0500, Mike Gorchak wrote: > > Hi All, > > > > I've recently found that lm-sensors doesn't have support for Global Mixed-mode > > Technology Inc. (GMT) G781 and G7811 temperature sensors. > > > > Overview datasheets are available on manufacturer's site: http://www.gmt.com.tw > > / , registers datasheet is available here: www.datasheetcatalog.org/datasheets2 > > /35/350422_1.pdf > > > > It seems that this device is registers compatible with ADM1032. SMBus > > manufacturer id 0x47, device ids 0x01 and 0x03. > > Should be safe to add support to the lm90 driver. Jean, any thoughts/comments ? Indeed the G781 seems compatible with the other chips supported by the lm90 driver, adding support to that driver sounds good. I'll gladly review any patch. > I seem to be unable to find a datasheet for G7811, though. We would need that to know > its I2C bus address, and for the correct device id (0x03 ?). GMT have a product sheet for the G7811 so it probably exists: http://www.gmt.com.tw/product/datasheet/EDS-7811.pdf Not enough to check for compatibility or write a proper driver though. But its lack of remote sensor means it can't be fully compatible with the ADM1032 anyway. Until we receive a formal support request and get a datasheet (or at the very least a register dump) I think we can just ignore the G7811. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
