This may be a newbie question, for which I apologise.
Running Linux Debian wheezy 3.1.0-1-amd64.
Motherboard is an old Abit AW9D (not a MAX edition, as is the more
popular version of this board)
Not detected by default, but I can: "modprobe abituguru3 force" and I
get the following message:
abituguru3: no Abit uGuru3 found, data = 0x00, cmd = 0xFF
abituguru3: Assuming Abit uGuru3 is present because of "force" parameter
abituguru3: this motherboard was not detected using DMI. Please send the
output of "dmidecode" to the abituguru3 maintainer (see MAINTAINERS)
abituguru3: found Abit uGuru3, motherboard ID: 0016
I get what looks like correct values, and have used this module for 2
years from Debian Lenny -> Squeeze -> Wheezy.
In an effort to reduce CPU temperatures during load, I have swapped the
CPU from a Core 2 Quad Q6600, to a Pentium Celeron E3200. The
temperatures reported by coretemp have dropped over 20C, however the
temperature reported for "CPU" by abituguru3 have remained the same.
With the Q6600, individual core temperatures reported by coretemp were
~5C higher than abituguru3. Now coretemp is displaying temperatures
nearly 20C lower than abituguru3.
Is this normal?
Where does the temperature come from?
Is it something I can make more accurate in /etc/sensors.conf?
Should I just ignore abituguru3 for CPU temperature and rely on the
coretemp values?
Any advice appreciated.
PS. Attached is a dmidecode output. If the attachment fails, you can
view the text at http://www.nooblet.org/other/empire_dmidecode_20120122.txt
sensors output:
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +29.0°C (high = +76.0°C, crit = +100.0°C)
Core 1: +27.0°C (high = +76.0°C, crit = +100.0°C)
abituguru3-isa-00e0
Adapter: ISA adapter
CPU Core: +1.12 V (min = +0.00 V, max = +2.55 V)
DDR2: +1.80 V (min = +0.00 V, max = +5.10 V)
DDR2 VTT: +0.90 V (min = +0.00 V, max = +2.55 V)
CPU VTT 1.2V: +1.11 V (min = +0.00 V, max = +2.55 V)
MCH & PCIE 1.5V: +1.51 V (min = +0.00 V, max = +2.55 V)
MCH 2.5V: +2.52 V (min = +0.00 V, max = +5.10 V)
ICH 1.05V: +1.04 V (min = +0.00 V, max = +2.55 V)
ATX +12V (24-Pin): +12.06 V (min = +0.00 V, max = +15.30 V)
ATX +12V (4-pin): +12.06 V (min = +0.00 V, max = +15.30 V)
ATX +5V: +5.01 V (min = +0.00 V, max = +7.65 V)
+3.3V: +3.34 V (min = +0.00 V, max = +5.10 V)
5VSB: +5.01 V (min = +0.00 V, max = +7.65 V)
CPU Fan: 2640 RPM (min = 300 RPM)
NB Fan: 0 RPM (min = 300 RPM)
SYS Fan: 0 RPM (min = 300 RPM)
AUX1 Fan: 0 RPM (min = 300 RPM)
AUX2 Fan: 0 RPM (min = 300 RPM)
AUX3 Fan: 0 RPM (min = 300 RPM)
OTES1 Fan: 0 RPM (min = 300 RPM)
CPU: +47.0°C (high = +0.0°C, crit = +255.0°C)
System: +30.0°C (high = +0.0°C, crit = +255.0°C)
PWM1: +35.0°C (high = +0.0°C, crit = +255.0°C)
PWM2: +33.0°C (high = +0.0°C, crit = +255.0°C)
PWM3: +35.0°C (high = +0.0°C, crit = +255.0°C)
PWM4: +33.0°C (high = +0.0°C, crit = +255.0°C)
# dmidecode 2.11
SMBIOS 2.2 present.
34 structures occupying 931 bytes.
Table at 0x000F0000.
Handle 0x0000, DMI type 0, 19 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 01/15/2008
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer:
Product Name:
Version:
Serial Number:
UUID: 00000000-0000-0000-0000-00508D978E73
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: http://www.abit.com.tw/
Product Name: AW9D . (Intel i975-ICH7)
Version: 1.0
Serial Number:
Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
Handle 0x0004, DMI type 4, 32 bytes
Processor Information
Socket Designation: Socket 775
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: 7A 06 01 00 FF FB EB BF
Version: <BAD INDEX>
Voltage: 0.0 V
External Clock: 204 MHz
Max Speed: 4000 MHz
Current Speed: 2448 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: No L3 Cache
Handle 0x0518, DMI type 0, 5 bytes
BIOS Information
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: Unknown
Type: Other
Installed Size: 2048 MB (Double-bank Connection)
Enabled Size: 2048 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: Unknown
Type: Other
Installed Size: 2048 MB (Double-bank Connection)
Enabled Size: 2048 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: 4 5
Current Speed: Unknown
Type: Other
Installed Size: 2048 MB (Double-bank Connection)
Enabled Size: 2048 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A3
Bank Connections: 6 7
Current Speed: Unknown
Type: Other
Installed Size: 2048 MB (Double-bank Connection)
Enabled Size: 2048 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Other
Port Type: USB
Handle 0x0013, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0014, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0015, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0016, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0017, DMI type 17, 21 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: DDR
Type Detail: Synchronous
Handle 0x0018, DMI type 17, 21 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: DDR
Type Detail: Synchronous
Handle 0x0019, DMI type 17, 21 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: DDR
Type Detail: Synchronous
Handle 0x001A, DMI type 17, 21 bytes
Memory Device
Array Handle: 0x0016
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A3
Bank Locator: Bank6/7
Type: DDR
Type Detail: Synchronous
Handle 0x001B, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x001FFFFFFFF
Range Size: 8 GB
Physical Array Handle: 0x0016
Partition Width: 1
Handle 0x001C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0017
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1
Handle 0x001D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000FFFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0018
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1
Handle 0x001E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00100000000
Ending Address: 0x0017FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0019
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1
Handle 0x001F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00180000000
Ending Address: 0x001FFFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x001B
Partition Row Position: 1
Handle 0x0020, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0021, DMI type 127, 4 bytes
End Of Table
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
