added error handling so if lm75_update_device fails
an error is returned when reading the value through sysfs
This is closely modeled after the way this is handled in ltc4261
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@xxxxxxxxx>
---
drivers/hwmon/lm75.c | 23 ++++++++++++++++-------
1 files changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 1888dd0..903f229 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -93,6 +93,10 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *da,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct lm75_data *data = lm75_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n",
LM75_TEMP_FROM_REG(data->temp[attr->index]));
}
@@ -402,6 +406,7 @@ static struct lm75_data *lm75_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct lm75_data *data = i2c_get_clientdata(client);
+ struct lm75_data *ret = data;
mutex_lock(&data->update_lock);
@@ -414,19 +419,23 @@ static struct lm75_data *lm75_update_device(struct device *dev)
int status;
status = lm75_read_value(client, LM75_REG_TEMP[i]);
- if (status < 0)
- dev_dbg(&client->dev, "reg %d, err %d\n",
- LM75_REG_TEMP[i], status);
- else
- data->temp[i] = status;
+ if (unlikely(status < 0)) {
+ dev_dbg(dev,
+ "LM75: Failed to read value: reg %d, error %d\n",
+ LM75_REG_TEMP[i], status);
+ ret = ERR_PTR(status);
+ data->valid = 0;
+ goto abort;
+ }
+ data->temp[i] = status;
}
data->last_updated = jiffies;
data->valid = 1;
}
+abort:
mutex_unlock(&data->update_lock);
-
- return data;
+ return ret;
}
/*-----------------------------------------------------------------------*/
--
1.7.0.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
