Re: How to get patches and build with them?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 02 Dec 2011 12:01:59 +0530, Charles wrote:
> Many thanks for the prompt reply Jean :)
> 
> I went with your recommended patches for starters.  Had to use -p3 (not
> in expected directory?).

I was no longer sure if it was -p2 or -p3. The -p3 is probably needed
because of the leading / in the file paths.

>  The build is for Slackware64 13.1, upgraded to
> kernel 2.6.38.7 running on an ASUS PBH67-V motherboard which has a
> Nuvoton NCT6776F -- as the newly installed lm_sensors 3.3.1
> sensors-detect now reports :)
> 
> These are the download and patch commands used:
> 
> gpg --keyserver wwwkeys.pgp.net --recv-keys 38F02FC8
> 
> cd /tmp \
>   && rm -fr lm_sensors-3.3.1 \
>   && wget
> http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-3.3.1.tar.bz2 \
>   && wget
> http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-3.3.1.tar.bz2.sig \
>   && gpg --verify lm_sensors-3.3.1.tar.bz2.sig \
>   && tar -jxvf lm_sensors-3.3.1.tar.bz2 \
>   && cd lm_sensors-3.3.1 \
>   && wget --output-document=patch_5991 \
>     'http://www.lm-sensors.org/changeset/5991?format=diff&new=5991' \
>   && wget --output-document=patch_5992 \
>     'http://www.lm-sensors.org/changeset/5992?format=diff&new=5992' \
>   && wget --output-document=patch_5993 \
>     'http://www.lm-sensors.org/changeset/5993?format=diff&new=5993' \
>   && wget --output-document=patch_5999 \
>     'http://www.lm-sensors.org/changeset/5999?format=diff&new=5999' \
>   && patch -p3 < patch_5991 \
>   && patch -p3 < patch_5992 \
>   && patch -p3 < patch_5993 \
>   && patch -p3 < patch_5999
> 
> BTW, make PREFIX=/tmp/tmp installed to /usr/local
> 
> After installing to /usr/local the following symlink was required to
> allow GKrellM to start:
> 
> ln -s /usr/local/lib/libsensors.so.4 /usr/lib64/libsensors.so.4

This can probably be avoided by passing LIBDIR=/usr/local/lib64 to
make, and adding /usr/local/lib64 to /etc/ld.so.conf if it's not
already there. Alternatively, just adding /usr/local/lib
to /etc/ld.so.conf should work too.

-- 
Jean Delvare
http://khali.linux-fr.org/wishlist.html

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux