In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.
The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Jean Delvare <khali@xxxxxxxxxxxx>
Cc: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
Cc: lm-sensors@xxxxxxxxxxxxxx
---
drivers/hwmon/ad7314.c | 1 -
drivers/hwmon/ads7871.c | 1 -
2 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
index 318e38e..5d760f3 100644
--- a/drivers/hwmon/ad7314.c
+++ b/drivers/hwmon/ad7314.c
@@ -160,7 +160,6 @@ MODULE_DEVICE_TABLE(spi, ad7314_id);
static struct spi_driver ad7314_driver = {
.driver = {
.name = "ad7314",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = ad7314_probe,
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index 5231934..04450f8 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -227,7 +227,6 @@ static int __devexit ads7871_remove(struct spi_device *spi)
static struct spi_driver ads7871_driver = {
.driver = {
.name = DEVICE_NAME,
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
--
1.7.7.1
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
