Since the number of PMBus drivers is getting large, move them into directory drivers/hwmon/pmbus to improve readability and scalability. Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> --- MAINTAINERS | 11 + drivers/hwmon/Kconfig | 87 +--- drivers/hwmon/Makefile | 10 +- drivers/hwmon/adm1275.c | 131 ---- drivers/hwmon/max16064.c | 91 --- drivers/hwmon/max34440.c | 199 ----- drivers/hwmon/max8688.c | 158 ---- drivers/hwmon/pmbus.c | 210 ----- drivers/hwmon/pmbus.h | 311 -------- drivers/hwmon/pmbus/Kconfig | 91 +++ drivers/hwmon/pmbus/Makefile | 12 + drivers/hwmon/pmbus/adm1275.c | 131 ++++ drivers/hwmon/pmbus/max16064.c | 91 +++ drivers/hwmon/pmbus/max34440.c | 199 +++++ drivers/hwmon/pmbus/max8688.c | 158 ++++ drivers/hwmon/pmbus/pmbus.c | 210 +++++ drivers/hwmon/pmbus/pmbus.h | 311 ++++++++ drivers/hwmon/pmbus/pmbus_core.c | 1567 ++++++++++++++++++++++++++++++++++++++ drivers/hwmon/pmbus/ucd9000.c | 278 +++++++ drivers/hwmon/pmbus/ucd9200.c | 210 +++++ drivers/hwmon/pmbus_core.c | 1567 -------------------------------------- drivers/hwmon/ucd9000.c | 278 ------- drivers/hwmon/ucd9200.c | 210 ----- 23 files changed, 3271 insertions(+), 3250 deletions(-) delete mode 100644 drivers/hwmon/adm1275.c delete mode 100644 drivers/hwmon/max16064.c delete mode 100644 drivers/hwmon/max34440.c delete mode 100644 drivers/hwmon/max8688.c delete mode 100644 drivers/hwmon/pmbus.c delete mode 100644 drivers/hwmon/pmbus.h create mode 100644 drivers/hwmon/pmbus/Kconfig create mode 100644 drivers/hwmon/pmbus/Makefile create mode 100644 drivers/hwmon/pmbus/adm1275.c create mode 100644 drivers/hwmon/pmbus/max16064.c create mode 100644 drivers/hwmon/pmbus/max34440.c create mode 100644 drivers/hwmon/pmbus/max8688.c create mode 100644 drivers/hwmon/pmbus/pmbus.c create mode 100644 drivers/hwmon/pmbus/pmbus.h create mode 100644 drivers/hwmon/pmbus/pmbus_core.c create mode 100644 drivers/hwmon/pmbus/ucd9000.c create mode 100644 drivers/hwmon/pmbus/ucd9200.c delete mode 100644 drivers/hwmon/pmbus_core.c delete mode 100644 drivers/hwmon/ucd9000.c delete mode 100644 drivers/hwmon/ucd9200.c diff --git a/MAINTAINERS b/MAINTAINERS index 187282d..a526783 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4961,6 +4961,17 @@ F: drivers/i2c/busses/i2c-puv3.c F: drivers/video/fb-puv3.c F: drivers/rtc/rtc-puv3.c +PMBUS HARDWARE MONITORING DRIVERS +M: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> +L: lm-sensors@xxxxxxxxxxxxxx +W: http://www.lm-sensors.org/ +W: http://www.roeck-us.net/linux/drivers/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git +S: Maintained +F: Documentation/hwmon/pmbus +F: drivers/hwmon/pmbus/ +F: include/linux/i2c/pmbus.h + PMC SIERRA MaxRAID DRIVER M: Anil Ravindranath <anil_ravindranath@xxxxxxxxxxxxxx> L: linux-scsi@xxxxxxxxxxxxxxx diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5f888f7..5f58afe 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -807,92 +807,7 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. -config PMBUS - tristate "PMBus support" - depends on I2C && EXPERIMENTAL - default n - help - Say yes here if you want to enable PMBus support. - - This driver can also be built as a module. If so, the module will - be called pmbus_core. - -if PMBUS - -config SENSORS_PMBUS - tristate "Generic PMBus devices" - default n - help - If you say yes here you get hardware monitoring support for generic - PMBus devices, including but not limited to BMR450, BMR451, BMR453, - BMR454, and LTC2978. - - This driver can also be built as a module. If so, the module will - be called pmbus. - -config SENSORS_ADM1275 - tristate "Analog Devices ADM1275" - default n - help - If you say yes here you get hardware monitoring support for Analog - Devices ADM1275 Hot-Swap Controller and Digital Power Monitor. - - This driver can also be built as a module. If so, the module will - be called adm1275. - -config SENSORS_MAX16064 - tristate "Maxim MAX16064" - default n - help - If you say yes here you get hardware monitoring support for Maxim - MAX16064. - - This driver can also be built as a module. If so, the module will - be called max16064. - -config SENSORS_MAX34440 - tristate "Maxim MAX34440/MAX34441" - default n - help - If you say yes here you get hardware monitoring support for Maxim - MAX34440 and MAX34441. - - This driver can also be built as a module. If so, the module will - be called max34440. - -config SENSORS_MAX8688 - tristate "Maxim MAX8688" - default n - help - If you say yes here you get hardware monitoring support for Maxim - MAX8688. - - This driver can also be built as a module. If so, the module will - be called max8688. - -config SENSORS_UCD9000 - tristate "TI UCD90120, UCD90124, UCD9090, UCD90910" - default n - help - If you say yes here you get hardware monitoring support for TI - UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health - Controllers. - - This driver can also be built as a module. If so, the module will - be called ucd9000. - -config SENSORS_UCD9200 - tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" - default n - help - If you say yes here you get hardware monitoring support for TI - UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 - Digital PWM System Controllers. - - This driver can also be built as a module. If so, the module will - be called ucd9200. - -endif # PMBUS +source drivers/hwmon/pmbus/Kconfig config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 28061cf..33a55d6 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -119,15 +119,7 @@ obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o -# PMBus drivers -obj-$(CONFIG_PMBUS) += pmbus_core.o -obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o -obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o -obj-$(CONFIG_SENSORS_MAX16064) += max16064.o -obj-$(CONFIG_SENSORS_MAX34440) += max34440.o -obj-$(CONFIG_SENSORS_MAX8688) += max8688.o -obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o -obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o +obj-$(CONFIG_PMBUS) += pmbus/ ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/adm1275.c deleted file mode 100644 index b9b7caf..0000000 --- a/drivers/hwmon/adm1275.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller - * and Digital Power Monitor - * - * Copyright (c) 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include "pmbus.h" - -#define ADM1275_PMON_CONFIG 0xd4 - -#define ADM1275_VIN_VOUT_SELECT (1 << 6) -#define ADM1275_VRANGE (1 << 5) - -static int adm1275_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int config; - int ret; - struct pmbus_driver_info *info; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_READ_BYTE_DATA)) - return -ENODEV; - - info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); - if (config < 0) { - ret = config; - goto err_mem; - } - - info->pages = 1; - info->direct[PSC_VOLTAGE_IN] = true; - info->direct[PSC_VOLTAGE_OUT] = true; - info->direct[PSC_CURRENT_OUT] = true; - info->m[PSC_CURRENT_OUT] = 800; - info->b[PSC_CURRENT_OUT] = 20475; - info->R[PSC_CURRENT_OUT] = -1; - info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; - - if (config & ADM1275_VRANGE) { - info->m[PSC_VOLTAGE_IN] = 19045; - info->b[PSC_VOLTAGE_IN] = 0; - info->R[PSC_VOLTAGE_IN] = -2; - info->m[PSC_VOLTAGE_OUT] = 19045; - info->b[PSC_VOLTAGE_OUT] = 0; - info->R[PSC_VOLTAGE_OUT] = -2; - } else { - info->m[PSC_VOLTAGE_IN] = 6666; - info->b[PSC_VOLTAGE_IN] = 0; - info->R[PSC_VOLTAGE_IN] = -1; - info->m[PSC_VOLTAGE_OUT] = 6666; - info->b[PSC_VOLTAGE_OUT] = 0; - info->R[PSC_VOLTAGE_OUT] = -1; - } - - if (config & ADM1275_VIN_VOUT_SELECT) - info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; - else - info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; - - ret = pmbus_do_probe(client, id, info); - if (ret) - goto err_mem; - return 0; - -err_mem: - kfree(info); - return ret; -} - -static int adm1275_remove(struct i2c_client *client) -{ - const struct pmbus_driver_info *info = pmbus_get_driver_info(client); - int ret; - - ret = pmbus_do_remove(client); - kfree(info); - return ret; -} - -static const struct i2c_device_id adm1275_id[] = { - {"adm1275", 0}, - { } -}; -MODULE_DEVICE_TABLE(i2c, adm1275_id); - -static struct i2c_driver adm1275_driver = { - .driver = { - .name = "adm1275", - }, - .probe = adm1275_probe, - .remove = adm1275_remove, - .id_table = adm1275_id, -}; - -static int __init adm1275_init(void) -{ - return i2c_add_driver(&adm1275_driver); -} - -static void __exit adm1275_exit(void) -{ - i2c_del_driver(&adm1275_driver); -} - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275"); -MODULE_LICENSE("GPL"); -module_init(adm1275_init); -module_exit(adm1275_exit); diff --git a/drivers/hwmon/max16064.c b/drivers/hwmon/max16064.c deleted file mode 100644 index 1d6d717..0000000 --- a/drivers/hwmon/max16064.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Hardware monitoring driver for Maxim MAX16064 - * - * Copyright (c) 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include "pmbus.h" - -static struct pmbus_driver_info max16064_info = { - .pages = 4, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, - .m[PSC_VOLTAGE_IN] = 19995, - .b[PSC_VOLTAGE_IN] = 0, - .R[PSC_VOLTAGE_IN] = -1, - .m[PSC_VOLTAGE_OUT] = 19995, - .b[PSC_VOLTAGE_OUT] = 0, - .R[PSC_VOLTAGE_OUT] = -1, - .m[PSC_TEMPERATURE] = -7612, - .b[PSC_TEMPERATURE] = 335, - .R[PSC_TEMPERATURE] = -3, - .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP - | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP, - .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, - .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, - .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, -}; - -static int max16064_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - return pmbus_do_probe(client, id, &max16064_info); -} - -static int max16064_remove(struct i2c_client *client) -{ - return pmbus_do_remove(client); -} - -static const struct i2c_device_id max16064_id[] = { - {"max16064", 0}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, max16064_id); - -/* This is the driver that will be inserted */ -static struct i2c_driver max16064_driver = { - .driver = { - .name = "max16064", - }, - .probe = max16064_probe, - .remove = max16064_remove, - .id_table = max16064_id, -}; - -static int __init max16064_init(void) -{ - return i2c_add_driver(&max16064_driver); -} - -static void __exit max16064_exit(void) -{ - i2c_del_driver(&max16064_driver); -} - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for Maxim MAX16064"); -MODULE_LICENSE("GPL"); -module_init(max16064_init); -module_exit(max16064_exit); diff --git a/drivers/hwmon/max34440.c b/drivers/hwmon/max34440.c deleted file mode 100644 index db11e1a..0000000 --- a/drivers/hwmon/max34440.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Hardware monitoring driver for Maxim MAX34440/MAX34441 - * - * Copyright (c) 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include "pmbus.h" - -enum chips { max34440, max34441 }; - -#define MAX34440_STATUS_OC_WARN (1 << 0) -#define MAX34440_STATUS_OC_FAULT (1 << 1) -#define MAX34440_STATUS_OT_FAULT (1 << 5) -#define MAX34440_STATUS_OT_WARN (1 << 6) - -static int max34440_read_byte_data(struct i2c_client *client, int page, int reg) -{ - int ret; - int mfg_status; - - ret = pmbus_set_page(client, page); - if (ret < 0) - return ret; - - switch (reg) { - case PMBUS_STATUS_IOUT: - mfg_status = pmbus_read_word_data(client, 0, - PMBUS_STATUS_MFR_SPECIFIC); - if (mfg_status < 0) - return mfg_status; - if (mfg_status & MAX34440_STATUS_OC_WARN) - ret |= PB_IOUT_OC_WARNING; - if (mfg_status & MAX34440_STATUS_OC_FAULT) - ret |= PB_IOUT_OC_FAULT; - break; - case PMBUS_STATUS_TEMPERATURE: - mfg_status = pmbus_read_word_data(client, 0, - PMBUS_STATUS_MFR_SPECIFIC); - if (mfg_status < 0) - return mfg_status; - if (mfg_status & MAX34440_STATUS_OT_WARN) - ret |= PB_TEMP_OT_WARNING; - if (mfg_status & MAX34440_STATUS_OT_FAULT) - ret |= PB_TEMP_OT_FAULT; - break; - default: - ret = -ENODATA; - break; - } - return ret; -} - -static struct pmbus_driver_info max34440_info[] = { - [max34440] = { - .pages = 14, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, - .direct[PSC_CURRENT_OUT] = true, - .m[PSC_VOLTAGE_IN] = 1, - .b[PSC_VOLTAGE_IN] = 0, - .R[PSC_VOLTAGE_IN] = 3, /* R = 0 in datasheet reflects mV */ - .m[PSC_VOLTAGE_OUT] = 1, - .b[PSC_VOLTAGE_OUT] = 0, - .R[PSC_VOLTAGE_OUT] = 3, /* R = 0 in datasheet reflects mV */ - .m[PSC_CURRENT_OUT] = 1, - .b[PSC_CURRENT_OUT] = 0, - .R[PSC_CURRENT_OUT] = 3, /* R = 0 in datasheet reflects mA */ - .m[PSC_TEMPERATURE] = 1, - .b[PSC_TEMPERATURE] = 0, - .R[PSC_TEMPERATURE] = 2, - .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .read_byte_data = max34440_read_byte_data, - }, - [max34441] = { - .pages = 12, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, - .direct[PSC_CURRENT_OUT] = true, - .direct[PSC_FAN] = true, - .m[PSC_VOLTAGE_IN] = 1, - .b[PSC_VOLTAGE_IN] = 0, - .R[PSC_VOLTAGE_IN] = 3, - .m[PSC_VOLTAGE_OUT] = 1, - .b[PSC_VOLTAGE_OUT] = 0, - .R[PSC_VOLTAGE_OUT] = 3, - .m[PSC_CURRENT_OUT] = 1, - .b[PSC_CURRENT_OUT] = 0, - .R[PSC_CURRENT_OUT] = 3, - .m[PSC_TEMPERATURE] = 1, - .b[PSC_TEMPERATURE] = 0, - .R[PSC_TEMPERATURE] = 2, - .m[PSC_FAN] = 1, - .b[PSC_FAN] = 0, - .R[PSC_FAN] = 0, - .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT - | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, - .func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12, - .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, - .read_byte_data = max34440_read_byte_data, - }, -}; - -static int max34440_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - return pmbus_do_probe(client, id, &max34440_info[id->driver_data]); -} - -static int max34440_remove(struct i2c_client *client) -{ - return pmbus_do_remove(client); -} - -static const struct i2c_device_id max34440_id[] = { - {"max34440", max34440}, - {"max34441", max34441}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, max34440_id); - -/* This is the driver that will be inserted */ -static struct i2c_driver max34440_driver = { - .driver = { - .name = "max34440", - }, - .probe = max34440_probe, - .remove = max34440_remove, - .id_table = max34440_id, -}; - -static int __init max34440_init(void) -{ - return i2c_add_driver(&max34440_driver); -} - -static void __exit max34440_exit(void) -{ - i2c_del_driver(&max34440_driver); -} - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441"); -MODULE_LICENSE("GPL"); -module_init(max34440_init); -module_exit(max34440_exit); diff --git a/drivers/hwmon/max8688.c b/drivers/hwmon/max8688.c deleted file mode 100644 index 7fb93f4..0000000 --- a/drivers/hwmon/max8688.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Hardware monitoring driver for Maxim MAX8688 - * - * Copyright (c) 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include "pmbus.h" - -#define MAX8688_MFG_STATUS 0xd8 - -#define MAX8688_STATUS_OC_FAULT (1 << 4) -#define MAX8688_STATUS_OV_FAULT (1 << 5) -#define MAX8688_STATUS_OV_WARNING (1 << 8) -#define MAX8688_STATUS_UV_FAULT (1 << 9) -#define MAX8688_STATUS_UV_WARNING (1 << 10) -#define MAX8688_STATUS_UC_FAULT (1 << 11) -#define MAX8688_STATUS_OC_WARNING (1 << 12) -#define MAX8688_STATUS_OT_FAULT (1 << 13) -#define MAX8688_STATUS_OT_WARNING (1 << 14) - -static int max8688_read_byte_data(struct i2c_client *client, int page, int reg) -{ - int ret = 0; - int mfg_status; - - if (page) - return -EINVAL; - - switch (reg) { - case PMBUS_STATUS_VOUT: - mfg_status = pmbus_read_word_data(client, 0, - MAX8688_MFG_STATUS); - if (mfg_status < 0) - return mfg_status; - if (mfg_status & MAX8688_STATUS_UV_WARNING) - ret |= PB_VOLTAGE_UV_WARNING; - if (mfg_status & MAX8688_STATUS_UV_FAULT) - ret |= PB_VOLTAGE_UV_FAULT; - if (mfg_status & MAX8688_STATUS_OV_WARNING) - ret |= PB_VOLTAGE_OV_WARNING; - if (mfg_status & MAX8688_STATUS_OV_FAULT) - ret |= PB_VOLTAGE_OV_FAULT; - break; - case PMBUS_STATUS_IOUT: - mfg_status = pmbus_read_word_data(client, 0, - MAX8688_MFG_STATUS); - if (mfg_status < 0) - return mfg_status; - if (mfg_status & MAX8688_STATUS_UC_FAULT) - ret |= PB_IOUT_UC_FAULT; - if (mfg_status & MAX8688_STATUS_OC_WARNING) - ret |= PB_IOUT_OC_WARNING; - if (mfg_status & MAX8688_STATUS_OC_FAULT) - ret |= PB_IOUT_OC_FAULT; - break; - case PMBUS_STATUS_TEMPERATURE: - mfg_status = pmbus_read_word_data(client, 0, - MAX8688_MFG_STATUS); - if (mfg_status < 0) - return mfg_status; - if (mfg_status & MAX8688_STATUS_OT_WARNING) - ret |= PB_TEMP_OT_WARNING; - if (mfg_status & MAX8688_STATUS_OT_FAULT) - ret |= PB_TEMP_OT_FAULT; - break; - default: - ret = -ENODATA; - break; - } - return ret; -} - -static struct pmbus_driver_info max8688_info = { - .pages = 1, - .direct[PSC_VOLTAGE_IN] = true, - .direct[PSC_VOLTAGE_OUT] = true, - .direct[PSC_TEMPERATURE] = true, - .direct[PSC_CURRENT_OUT] = true, - .m[PSC_VOLTAGE_IN] = 19995, - .b[PSC_VOLTAGE_IN] = 0, - .R[PSC_VOLTAGE_IN] = -1, - .m[PSC_VOLTAGE_OUT] = 19995, - .b[PSC_VOLTAGE_OUT] = 0, - .R[PSC_VOLTAGE_OUT] = -1, - .m[PSC_CURRENT_OUT] = 23109, - .b[PSC_CURRENT_OUT] = 0, - .R[PSC_CURRENT_OUT] = -2, - .m[PSC_TEMPERATURE] = -7612, - .b[PSC_TEMPERATURE] = 335, - .R[PSC_TEMPERATURE] = -3, - .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP - | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT - | PMBUS_HAVE_STATUS_TEMP, - .read_byte_data = max8688_read_byte_data, -}; - -static int max8688_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - return pmbus_do_probe(client, id, &max8688_info); -} - -static int max8688_remove(struct i2c_client *client) -{ - return pmbus_do_remove(client); -} - -static const struct i2c_device_id max8688_id[] = { - {"max8688", 0}, - { } -}; - -MODULE_DEVICE_TABLE(i2c, max8688_id); - -/* This is the driver that will be inserted */ -static struct i2c_driver max8688_driver = { - .driver = { - .name = "max8688", - }, - .probe = max8688_probe, - .remove = max8688_remove, - .id_table = max8688_id, -}; - -static int __init max8688_init(void) -{ - return i2c_add_driver(&max8688_driver); -} - -static void __exit max8688_exit(void) -{ - i2c_del_driver(&max8688_driver); -} - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for Maxim MAX8688"); -MODULE_LICENSE("GPL"); -module_init(max8688_init); -module_exit(max8688_exit); diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c deleted file mode 100644 index 9b1f0c3..0000000 --- a/drivers/hwmon/pmbus.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Hardware monitoring driver for PMBus devices - * - * Copyright (c) 2010, 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/i2c.h> -#include "pmbus.h" - -/* - * Find sensor groups and status registers on each page. - */ -static void pmbus_find_sensor_groups(struct i2c_client *client, - struct pmbus_driver_info *info) -{ - int page; - - /* Sensors detected on page 0 only */ - if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN)) - info->func[0] |= PMBUS_HAVE_VIN; - if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP)) - info->func[0] |= PMBUS_HAVE_VCAP; - if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN)) - info->func[0] |= PMBUS_HAVE_IIN; - if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN)) - info->func[0] |= PMBUS_HAVE_PIN; - if (info->func[0] - && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) - info->func[0] |= PMBUS_HAVE_STATUS_INPUT; - if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && - pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { - info->func[0] |= PMBUS_HAVE_FAN12; - if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) - info->func[0] |= PMBUS_HAVE_STATUS_FAN12; - } - if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && - pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { - info->func[0] |= PMBUS_HAVE_FAN34; - if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) - info->func[0] |= PMBUS_HAVE_STATUS_FAN34; - } - if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) - info->func[0] |= PMBUS_HAVE_TEMP; - if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) - info->func[0] |= PMBUS_HAVE_TEMP2; - if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) - info->func[0] |= PMBUS_HAVE_TEMP3; - if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 - | PMBUS_HAVE_TEMP3) - && pmbus_check_byte_register(client, 0, - PMBUS_STATUS_TEMPERATURE)) - info->func[0] |= PMBUS_HAVE_STATUS_TEMP; - - /* Sensors detected on all pages */ - for (page = 0; page < info->pages; page++) { - if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) { - info->func[page] |= PMBUS_HAVE_VOUT; - if (pmbus_check_byte_register(client, page, - PMBUS_STATUS_VOUT)) - info->func[page] |= PMBUS_HAVE_STATUS_VOUT; - } - if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) { - info->func[page] |= PMBUS_HAVE_IOUT; - if (pmbus_check_byte_register(client, 0, - PMBUS_STATUS_IOUT)) - info->func[page] |= PMBUS_HAVE_STATUS_IOUT; - } - if (pmbus_check_word_register(client, page, PMBUS_READ_POUT)) - info->func[page] |= PMBUS_HAVE_POUT; - } -} - -/* - * Identify chip parameters. - */ -static int pmbus_identify(struct i2c_client *client, - struct pmbus_driver_info *info) -{ - if (!info->pages) { - /* - * Check if the PAGE command is supported. If it is, - * keep setting the page number until it fails or until the - * maximum number of pages has been reached. Assume that - * this is the number of pages supported by the chip. - */ - if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) { - int page; - - for (page = 1; page < PMBUS_PAGES; page++) { - if (pmbus_set_page(client, page) < 0) - break; - } - pmbus_set_page(client, 0); - info->pages = page; - } else { - info->pages = 1; - } - } - - /* - * We should check if the COEFFICIENTS register is supported. - * If it is, and the chip is configured for direct mode, we can read - * the coefficients from the chip, one set per group of sensor - * registers. - * - * To do this, we will need access to a chip which actually supports the - * COEFFICIENTS command, since the command is too complex to implement - * without testing it. - */ - - /* Try to find sensor groups */ - pmbus_find_sensor_groups(client, info); - - return 0; -} - -static int pmbus_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct pmbus_driver_info *info; - int ret; - - info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->pages = id->driver_data; - info->identify = pmbus_identify; - - ret = pmbus_do_probe(client, id, info); - if (ret < 0) - goto out; - return 0; - -out: - kfree(info); - return ret; -} - -static int pmbus_remove(struct i2c_client *client) -{ - int ret; - const struct pmbus_driver_info *info; - - info = pmbus_get_driver_info(client); - ret = pmbus_do_remove(client); - kfree(info); - return ret; -} - -/* - * Use driver_data to set the number of pages supported by the chip. - */ -static const struct i2c_device_id pmbus_id[] = { - {"bmr450", 1}, - {"bmr451", 1}, - {"bmr453", 1}, - {"bmr454", 1}, - {"ltc2978", 8}, - {"pmbus", 0}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, pmbus_id); - -/* This is the driver that will be inserted */ -static struct i2c_driver pmbus_driver = { - .driver = { - .name = "pmbus", - }, - .probe = pmbus_probe, - .remove = pmbus_remove, - .id_table = pmbus_id, -}; - -static int __init pmbus_init(void) -{ - return i2c_add_driver(&pmbus_driver); -} - -static void __exit pmbus_exit(void) -{ - i2c_del_driver(&pmbus_driver); -} - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("Generic PMBus driver"); -MODULE_LICENSE("GPL"); -module_init(pmbus_init); -module_exit(pmbus_exit); diff --git a/drivers/hwmon/pmbus.h b/drivers/hwmon/pmbus.h deleted file mode 100644 index 50647ab..0000000 --- a/drivers/hwmon/pmbus.h +++ /dev/null @@ -1,311 +0,0 @@ -/* - * pmbus.h - Common defines and structures for PMBus devices - * - * Copyright (c) 2010, 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef PMBUS_H -#define PMBUS_H - -/* - * Registers - */ -#define PMBUS_PAGE 0x00 -#define PMBUS_OPERATION 0x01 -#define PMBUS_ON_OFF_CONFIG 0x02 -#define PMBUS_CLEAR_FAULTS 0x03 -#define PMBUS_PHASE 0x04 - -#define PMBUS_CAPABILITY 0x19 -#define PMBUS_QUERY 0x1A - -#define PMBUS_VOUT_MODE 0x20 -#define PMBUS_VOUT_COMMAND 0x21 -#define PMBUS_VOUT_TRIM 0x22 -#define PMBUS_VOUT_CAL_OFFSET 0x23 -#define PMBUS_VOUT_MAX 0x24 -#define PMBUS_VOUT_MARGIN_HIGH 0x25 -#define PMBUS_VOUT_MARGIN_LOW 0x26 -#define PMBUS_VOUT_TRANSITION_RATE 0x27 -#define PMBUS_VOUT_DROOP 0x28 -#define PMBUS_VOUT_SCALE_LOOP 0x29 -#define PMBUS_VOUT_SCALE_MONITOR 0x2A - -#define PMBUS_COEFFICIENTS 0x30 -#define PMBUS_POUT_MAX 0x31 - -#define PMBUS_FAN_CONFIG_12 0x3A -#define PMBUS_FAN_COMMAND_1 0x3B -#define PMBUS_FAN_COMMAND_2 0x3C -#define PMBUS_FAN_CONFIG_34 0x3D -#define PMBUS_FAN_COMMAND_3 0x3E -#define PMBUS_FAN_COMMAND_4 0x3F - -#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40 -#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41 -#define PMBUS_VOUT_OV_WARN_LIMIT 0x42 -#define PMBUS_VOUT_UV_WARN_LIMIT 0x43 -#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44 -#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45 -#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46 -#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47 -#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48 -#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49 -#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A -#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B -#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C - -#define PMBUS_OT_FAULT_LIMIT 0x4F -#define PMBUS_OT_FAULT_RESPONSE 0x50 -#define PMBUS_OT_WARN_LIMIT 0x51 -#define PMBUS_UT_WARN_LIMIT 0x52 -#define PMBUS_UT_FAULT_LIMIT 0x53 -#define PMBUS_UT_FAULT_RESPONSE 0x54 -#define PMBUS_VIN_OV_FAULT_LIMIT 0x55 -#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56 -#define PMBUS_VIN_OV_WARN_LIMIT 0x57 -#define PMBUS_VIN_UV_WARN_LIMIT 0x58 -#define PMBUS_VIN_UV_FAULT_LIMIT 0x59 - -#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B -#define PMBUS_IIN_OC_WARN_LIMIT 0x5D - -#define PMBUS_POUT_OP_FAULT_LIMIT 0x68 -#define PMBUS_POUT_OP_WARN_LIMIT 0x6A -#define PMBUS_PIN_OP_WARN_LIMIT 0x6B - -#define PMBUS_STATUS_BYTE 0x78 -#define PMBUS_STATUS_WORD 0x79 -#define PMBUS_STATUS_VOUT 0x7A -#define PMBUS_STATUS_IOUT 0x7B -#define PMBUS_STATUS_INPUT 0x7C -#define PMBUS_STATUS_TEMPERATURE 0x7D -#define PMBUS_STATUS_CML 0x7E -#define PMBUS_STATUS_OTHER 0x7F -#define PMBUS_STATUS_MFR_SPECIFIC 0x80 -#define PMBUS_STATUS_FAN_12 0x81 -#define PMBUS_STATUS_FAN_34 0x82 - -#define PMBUS_READ_VIN 0x88 -#define PMBUS_READ_IIN 0x89 -#define PMBUS_READ_VCAP 0x8A -#define PMBUS_READ_VOUT 0x8B -#define PMBUS_READ_IOUT 0x8C -#define PMBUS_READ_TEMPERATURE_1 0x8D -#define PMBUS_READ_TEMPERATURE_2 0x8E -#define PMBUS_READ_TEMPERATURE_3 0x8F -#define PMBUS_READ_FAN_SPEED_1 0x90 -#define PMBUS_READ_FAN_SPEED_2 0x91 -#define PMBUS_READ_FAN_SPEED_3 0x92 -#define PMBUS_READ_FAN_SPEED_4 0x93 -#define PMBUS_READ_DUTY_CYCLE 0x94 -#define PMBUS_READ_FREQUENCY 0x95 -#define PMBUS_READ_POUT 0x96 -#define PMBUS_READ_PIN 0x97 - -#define PMBUS_REVISION 0x98 -#define PMBUS_MFR_ID 0x99 -#define PMBUS_MFR_MODEL 0x9A -#define PMBUS_MFR_REVISION 0x9B -#define PMBUS_MFR_LOCATION 0x9C -#define PMBUS_MFR_DATE 0x9D -#define PMBUS_MFR_SERIAL 0x9E - -/* - * CAPABILITY - */ -#define PB_CAPABILITY_SMBALERT (1<<4) -#define PB_CAPABILITY_ERROR_CHECK (1<<7) - -/* - * VOUT_MODE - */ -#define PB_VOUT_MODE_MODE_MASK 0xe0 -#define PB_VOUT_MODE_PARAM_MASK 0x1f - -#define PB_VOUT_MODE_LINEAR 0x00 -#define PB_VOUT_MODE_VID 0x20 -#define PB_VOUT_MODE_DIRECT 0x40 - -/* - * Fan configuration - */ -#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1)) -#define PB_FAN_2_RPM (1 << 2) -#define PB_FAN_2_INSTALLED (1 << 3) -#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5)) -#define PB_FAN_1_RPM (1 << 6) -#define PB_FAN_1_INSTALLED (1 << 7) - -/* - * STATUS_BYTE, STATUS_WORD (lower) - */ -#define PB_STATUS_NONE_ABOVE (1<<0) -#define PB_STATUS_CML (1<<1) -#define PB_STATUS_TEMPERATURE (1<<2) -#define PB_STATUS_VIN_UV (1<<3) -#define PB_STATUS_IOUT_OC (1<<4) -#define PB_STATUS_VOUT_OV (1<<5) -#define PB_STATUS_OFF (1<<6) -#define PB_STATUS_BUSY (1<<7) - -/* - * STATUS_WORD (upper) - */ -#define PB_STATUS_UNKNOWN (1<<8) -#define PB_STATUS_OTHER (1<<9) -#define PB_STATUS_FANS (1<<10) -#define PB_STATUS_POWER_GOOD_N (1<<11) -#define PB_STATUS_WORD_MFR (1<<12) -#define PB_STATUS_INPUT (1<<13) -#define PB_STATUS_IOUT_POUT (1<<14) -#define PB_STATUS_VOUT (1<<15) - -/* - * STATUS_IOUT - */ -#define PB_POUT_OP_WARNING (1<<0) -#define PB_POUT_OP_FAULT (1<<1) -#define PB_POWER_LIMITING (1<<2) -#define PB_CURRENT_SHARE_FAULT (1<<3) -#define PB_IOUT_UC_FAULT (1<<4) -#define PB_IOUT_OC_WARNING (1<<5) -#define PB_IOUT_OC_LV_FAULT (1<<6) -#define PB_IOUT_OC_FAULT (1<<7) - -/* - * STATUS_VOUT, STATUS_INPUT - */ -#define PB_VOLTAGE_UV_FAULT (1<<4) -#define PB_VOLTAGE_UV_WARNING (1<<5) -#define PB_VOLTAGE_OV_WARNING (1<<6) -#define PB_VOLTAGE_OV_FAULT (1<<7) - -/* - * STATUS_INPUT - */ -#define PB_PIN_OP_WARNING (1<<0) -#define PB_IIN_OC_WARNING (1<<1) -#define PB_IIN_OC_FAULT (1<<2) - -/* - * STATUS_TEMPERATURE - */ -#define PB_TEMP_UT_FAULT (1<<4) -#define PB_TEMP_UT_WARNING (1<<5) -#define PB_TEMP_OT_WARNING (1<<6) -#define PB_TEMP_OT_FAULT (1<<7) - -/* - * STATUS_FAN - */ -#define PB_FAN_AIRFLOW_WARNING (1<<0) -#define PB_FAN_AIRFLOW_FAULT (1<<1) -#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2) -#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3) -#define PB_FAN_FAN2_WARNING (1<<4) -#define PB_FAN_FAN1_WARNING (1<<5) -#define PB_FAN_FAN2_FAULT (1<<6) -#define PB_FAN_FAN1_FAULT (1<<7) - -/* - * CML_FAULT_STATUS - */ -#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0) -#define PB_CML_FAULT_OTHER_COMM (1<<1) -#define PB_CML_FAULT_PROCESSOR (1<<3) -#define PB_CML_FAULT_MEMORY (1<<4) -#define PB_CML_FAULT_PACKET_ERROR (1<<5) -#define PB_CML_FAULT_INVALID_DATA (1<<6) -#define PB_CML_FAULT_INVALID_COMMAND (1<<7) - -enum pmbus_sensor_classes { - PSC_VOLTAGE_IN = 0, - PSC_VOLTAGE_OUT, - PSC_CURRENT_IN, - PSC_CURRENT_OUT, - PSC_POWER, - PSC_TEMPERATURE, - PSC_FAN, - PSC_NUM_CLASSES /* Number of power sensor classes */ -}; - -#define PMBUS_PAGES 32 /* Per PMBus specification */ - -/* Functionality bit mask */ -#define PMBUS_HAVE_VIN (1 << 0) -#define PMBUS_HAVE_VCAP (1 << 1) -#define PMBUS_HAVE_VOUT (1 << 2) -#define PMBUS_HAVE_IIN (1 << 3) -#define PMBUS_HAVE_IOUT (1 << 4) -#define PMBUS_HAVE_PIN (1 << 5) -#define PMBUS_HAVE_POUT (1 << 6) -#define PMBUS_HAVE_FAN12 (1 << 7) -#define PMBUS_HAVE_FAN34 (1 << 8) -#define PMBUS_HAVE_TEMP (1 << 9) -#define PMBUS_HAVE_TEMP2 (1 << 10) -#define PMBUS_HAVE_TEMP3 (1 << 11) -#define PMBUS_HAVE_STATUS_VOUT (1 << 12) -#define PMBUS_HAVE_STATUS_IOUT (1 << 13) -#define PMBUS_HAVE_STATUS_INPUT (1 << 14) -#define PMBUS_HAVE_STATUS_TEMP (1 << 15) -#define PMBUS_HAVE_STATUS_FAN12 (1 << 16) -#define PMBUS_HAVE_STATUS_FAN34 (1 << 17) - -struct pmbus_driver_info { - int pages; /* Total number of pages */ - bool direct[PSC_NUM_CLASSES]; - /* true if device uses direct data format - for the given sensor class */ - /* - * Support one set of coefficients for each sensor type - * Used for chips providing data in direct mode. - */ - int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ - int b[PSC_NUM_CLASSES]; /* offset */ - int R[PSC_NUM_CLASSES]; /* exponent */ - - u32 func[PMBUS_PAGES]; /* Functionality, per page */ - /* - * The following functions map manufacturing specific register values - * to PMBus standard register values. Specify only if mapping is - * necessary. - */ - int (*read_byte_data)(struct i2c_client *client, int page, int reg); - /* - * The identify function determines supported PMBus functionality. - * This function is only necessary if a chip driver supports multiple - * chips, and the chip functionality is not pre-determined. - */ - int (*identify)(struct i2c_client *client, - struct pmbus_driver_info *info); -}; - -/* Function declarations */ - -int pmbus_set_page(struct i2c_client *client, u8 page); -int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); -void pmbus_clear_faults(struct i2c_client *client); -bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); -bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); -int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, - struct pmbus_driver_info *info); -int pmbus_do_remove(struct i2c_client *client); -const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client - *client); - -#endif /* PMBUS_H */ diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig new file mode 100644 index 0000000..c87c07f --- /dev/null +++ b/drivers/hwmon/pmbus/Kconfig @@ -0,0 +1,91 @@ +# +# PMBus chip drivers configuration +# + +menuconfig PMBUS + tristate "PMBus support" + depends on I2C && EXPERIMENTAL + default n + help + Say yes here if you want to enable PMBus support. + + This driver can also be built as a module. If so, the module will + be called pmbus_core. + +if PMBUS + +config SENSORS_PMBUS + tristate "Generic PMBus devices" + default y + help + If you say yes here you get hardware monitoring support for generic + PMBus devices, including but not limited to BMR450, BMR451, BMR453, + BMR454, and LTC2978. + + This driver can also be built as a module. If so, the module will + be called pmbus. + +config SENSORS_ADM1275 + tristate "Analog Devices ADM1275" + default n + help + If you say yes here you get hardware monitoring support for Analog + Devices ADM1275 Hot-Swap Controller and Digital Power Monitor. + + This driver can also be built as a module. If so, the module will + be called adm1275. + +config SENSORS_MAX16064 + tristate "Maxim MAX16064" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX16064. + + This driver can also be built as a module. If so, the module will + be called max16064. + +config SENSORS_MAX34440 + tristate "Maxim MAX34440/MAX34441" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX34440 and MAX34441. + + This driver can also be built as a module. If so, the module will + be called max34440. + +config SENSORS_MAX8688 + tristate "Maxim MAX8688" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX8688. + + This driver can also be built as a module. If so, the module will + be called max8688. + +config SENSORS_UCD9000 + tristate "TI UCD90120, UCD90124, UCD9090, UCD90910" + default n + help + If you say yes here you get hardware monitoring support for TI + UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health + Controllers. + + This driver can also be built as a module. If so, the module will + be called ucd9000. + +config SENSORS_UCD9200 + tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" + default n + help + If you say yes here you get hardware monitoring support for TI + UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 + Digital PWM System Controllers. + + This driver can also be built as a module. If so, the module will + be called ucd9200. + +endif # PMBUS + diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile new file mode 100644 index 0000000..0178f81 --- /dev/null +++ b/drivers/hwmon/pmbus/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for PMBus chip drivers. +# + +obj-$(CONFIG_PMBUS) += pmbus_core.o +obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o +obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o +obj-$(CONFIG_SENSORS_MAX16064) += max16064.o +obj-$(CONFIG_SENSORS_MAX34440) += max34440.o +obj-$(CONFIG_SENSORS_MAX8688) += max8688.o +obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o +obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c new file mode 100644 index 0000000..b9b7caf --- /dev/null +++ b/drivers/hwmon/pmbus/adm1275.c @@ -0,0 +1,131 @@ +/* + * Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller + * and Digital Power Monitor + * + * Copyright (c) 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include "pmbus.h" + +#define ADM1275_PMON_CONFIG 0xd4 + +#define ADM1275_VIN_VOUT_SELECT (1 << 6) +#define ADM1275_VRANGE (1 << 5) + +static int adm1275_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int config; + int ret; + struct pmbus_driver_info *info; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) + return -ENODEV; + + info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); + if (config < 0) { + ret = config; + goto err_mem; + } + + info->pages = 1; + info->direct[PSC_VOLTAGE_IN] = true; + info->direct[PSC_VOLTAGE_OUT] = true; + info->direct[PSC_CURRENT_OUT] = true; + info->m[PSC_CURRENT_OUT] = 800; + info->b[PSC_CURRENT_OUT] = 20475; + info->R[PSC_CURRENT_OUT] = -1; + info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; + + if (config & ADM1275_VRANGE) { + info->m[PSC_VOLTAGE_IN] = 19045; + info->b[PSC_VOLTAGE_IN] = 0; + info->R[PSC_VOLTAGE_IN] = -2; + info->m[PSC_VOLTAGE_OUT] = 19045; + info->b[PSC_VOLTAGE_OUT] = 0; + info->R[PSC_VOLTAGE_OUT] = -2; + } else { + info->m[PSC_VOLTAGE_IN] = 6666; + info->b[PSC_VOLTAGE_IN] = 0; + info->R[PSC_VOLTAGE_IN] = -1; + info->m[PSC_VOLTAGE_OUT] = 6666; + info->b[PSC_VOLTAGE_OUT] = 0; + info->R[PSC_VOLTAGE_OUT] = -1; + } + + if (config & ADM1275_VIN_VOUT_SELECT) + info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + else + info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; + + ret = pmbus_do_probe(client, id, info); + if (ret) + goto err_mem; + return 0; + +err_mem: + kfree(info); + return ret; +} + +static int adm1275_remove(struct i2c_client *client) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + int ret; + + ret = pmbus_do_remove(client); + kfree(info); + return ret; +} + +static const struct i2c_device_id adm1275_id[] = { + {"adm1275", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1275_id); + +static struct i2c_driver adm1275_driver = { + .driver = { + .name = "adm1275", + }, + .probe = adm1275_probe, + .remove = adm1275_remove, + .id_table = adm1275_id, +}; + +static int __init adm1275_init(void) +{ + return i2c_add_driver(&adm1275_driver); +} + +static void __exit adm1275_exit(void) +{ + i2c_del_driver(&adm1275_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275"); +MODULE_LICENSE("GPL"); +module_init(adm1275_init); +module_exit(adm1275_exit); diff --git a/drivers/hwmon/pmbus/max16064.c b/drivers/hwmon/pmbus/max16064.c new file mode 100644 index 0000000..1d6d717 --- /dev/null +++ b/drivers/hwmon/pmbus/max16064.c @@ -0,0 +1,91 @@ +/* + * Hardware monitoring driver for Maxim MAX16064 + * + * Copyright (c) 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "pmbus.h" + +static struct pmbus_driver_info max16064_info = { + .pages = 4, + .direct[PSC_VOLTAGE_IN] = true, + .direct[PSC_VOLTAGE_OUT] = true, + .direct[PSC_TEMPERATURE] = true, + .m[PSC_VOLTAGE_IN] = 19995, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -1, + .m[PSC_VOLTAGE_OUT] = 19995, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = -1, + .m[PSC_TEMPERATURE] = -7612, + .b[PSC_TEMPERATURE] = 335, + .R[PSC_TEMPERATURE] = -3, + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP, + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, + .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, +}; + +static int max16064_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &max16064_info); +} + +static int max16064_remove(struct i2c_client *client) +{ + return pmbus_do_remove(client); +} + +static const struct i2c_device_id max16064_id[] = { + {"max16064", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, max16064_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver max16064_driver = { + .driver = { + .name = "max16064", + }, + .probe = max16064_probe, + .remove = max16064_remove, + .id_table = max16064_id, +}; + +static int __init max16064_init(void) +{ + return i2c_add_driver(&max16064_driver); +} + +static void __exit max16064_exit(void) +{ + i2c_del_driver(&max16064_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus driver for Maxim MAX16064"); +MODULE_LICENSE("GPL"); +module_init(max16064_init); +module_exit(max16064_exit); diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c new file mode 100644 index 0000000..db11e1a --- /dev/null +++ b/drivers/hwmon/pmbus/max34440.c @@ -0,0 +1,199 @@ +/* + * Hardware monitoring driver for Maxim MAX34440/MAX34441 + * + * Copyright (c) 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "pmbus.h" + +enum chips { max34440, max34441 }; + +#define MAX34440_STATUS_OC_WARN (1 << 0) +#define MAX34440_STATUS_OC_FAULT (1 << 1) +#define MAX34440_STATUS_OT_FAULT (1 << 5) +#define MAX34440_STATUS_OT_WARN (1 << 6) + +static int max34440_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + int mfg_status; + + ret = pmbus_set_page(client, page); + if (ret < 0) + return ret; + + switch (reg) { + case PMBUS_STATUS_IOUT: + mfg_status = pmbus_read_word_data(client, 0, + PMBUS_STATUS_MFR_SPECIFIC); + if (mfg_status < 0) + return mfg_status; + if (mfg_status & MAX34440_STATUS_OC_WARN) + ret |= PB_IOUT_OC_WARNING; + if (mfg_status & MAX34440_STATUS_OC_FAULT) + ret |= PB_IOUT_OC_FAULT; + break; + case PMBUS_STATUS_TEMPERATURE: + mfg_status = pmbus_read_word_data(client, 0, + PMBUS_STATUS_MFR_SPECIFIC); + if (mfg_status < 0) + return mfg_status; + if (mfg_status & MAX34440_STATUS_OT_WARN) + ret |= PB_TEMP_OT_WARNING; + if (mfg_status & MAX34440_STATUS_OT_FAULT) + ret |= PB_TEMP_OT_FAULT; + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + +static struct pmbus_driver_info max34440_info[] = { + [max34440] = { + .pages = 14, + .direct[PSC_VOLTAGE_IN] = true, + .direct[PSC_VOLTAGE_OUT] = true, + .direct[PSC_TEMPERATURE] = true, + .direct[PSC_CURRENT_OUT] = true, + .m[PSC_VOLTAGE_IN] = 1, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = 3, /* R = 0 in datasheet reflects mV */ + .m[PSC_VOLTAGE_OUT] = 1, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 3, /* R = 0 in datasheet reflects mV */ + .m[PSC_CURRENT_OUT] = 1, + .b[PSC_CURRENT_OUT] = 0, + .R[PSC_CURRENT_OUT] = 3, /* R = 0 in datasheet reflects mA */ + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 0, + .R[PSC_TEMPERATURE] = 2, + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .read_byte_data = max34440_read_byte_data, + }, + [max34441] = { + .pages = 12, + .direct[PSC_VOLTAGE_IN] = true, + .direct[PSC_VOLTAGE_OUT] = true, + .direct[PSC_TEMPERATURE] = true, + .direct[PSC_CURRENT_OUT] = true, + .direct[PSC_FAN] = true, + .m[PSC_VOLTAGE_IN] = 1, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = 3, + .m[PSC_VOLTAGE_OUT] = 1, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 3, + .m[PSC_CURRENT_OUT] = 1, + .b[PSC_CURRENT_OUT] = 0, + .R[PSC_CURRENT_OUT] = 3, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 0, + .R[PSC_TEMPERATURE] = 2, + .m[PSC_FAN] = 1, + .b[PSC_FAN] = 0, + .R[PSC_FAN] = 0, + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12, + .func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .read_byte_data = max34440_read_byte_data, + }, +}; + +static int max34440_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &max34440_info[id->driver_data]); +} + +static int max34440_remove(struct i2c_client *client) +{ + return pmbus_do_remove(client); +} + +static const struct i2c_device_id max34440_id[] = { + {"max34440", max34440}, + {"max34441", max34441}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, max34440_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver max34440_driver = { + .driver = { + .name = "max34440", + }, + .probe = max34440_probe, + .remove = max34440_remove, + .id_table = max34440_id, +}; + +static int __init max34440_init(void) +{ + return i2c_add_driver(&max34440_driver); +} + +static void __exit max34440_exit(void) +{ + i2c_del_driver(&max34440_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441"); +MODULE_LICENSE("GPL"); +module_init(max34440_init); +module_exit(max34440_exit); diff --git a/drivers/hwmon/pmbus/max8688.c b/drivers/hwmon/pmbus/max8688.c new file mode 100644 index 0000000..7fb93f4 --- /dev/null +++ b/drivers/hwmon/pmbus/max8688.c @@ -0,0 +1,158 @@ +/* + * Hardware monitoring driver for Maxim MAX8688 + * + * Copyright (c) 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "pmbus.h" + +#define MAX8688_MFG_STATUS 0xd8 + +#define MAX8688_STATUS_OC_FAULT (1 << 4) +#define MAX8688_STATUS_OV_FAULT (1 << 5) +#define MAX8688_STATUS_OV_WARNING (1 << 8) +#define MAX8688_STATUS_UV_FAULT (1 << 9) +#define MAX8688_STATUS_UV_WARNING (1 << 10) +#define MAX8688_STATUS_UC_FAULT (1 << 11) +#define MAX8688_STATUS_OC_WARNING (1 << 12) +#define MAX8688_STATUS_OT_FAULT (1 << 13) +#define MAX8688_STATUS_OT_WARNING (1 << 14) + +static int max8688_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret = 0; + int mfg_status; + + if (page) + return -EINVAL; + + switch (reg) { + case PMBUS_STATUS_VOUT: + mfg_status = pmbus_read_word_data(client, 0, + MAX8688_MFG_STATUS); + if (mfg_status < 0) + return mfg_status; + if (mfg_status & MAX8688_STATUS_UV_WARNING) + ret |= PB_VOLTAGE_UV_WARNING; + if (mfg_status & MAX8688_STATUS_UV_FAULT) + ret |= PB_VOLTAGE_UV_FAULT; + if (mfg_status & MAX8688_STATUS_OV_WARNING) + ret |= PB_VOLTAGE_OV_WARNING; + if (mfg_status & MAX8688_STATUS_OV_FAULT) + ret |= PB_VOLTAGE_OV_FAULT; + break; + case PMBUS_STATUS_IOUT: + mfg_status = pmbus_read_word_data(client, 0, + MAX8688_MFG_STATUS); + if (mfg_status < 0) + return mfg_status; + if (mfg_status & MAX8688_STATUS_UC_FAULT) + ret |= PB_IOUT_UC_FAULT; + if (mfg_status & MAX8688_STATUS_OC_WARNING) + ret |= PB_IOUT_OC_WARNING; + if (mfg_status & MAX8688_STATUS_OC_FAULT) + ret |= PB_IOUT_OC_FAULT; + break; + case PMBUS_STATUS_TEMPERATURE: + mfg_status = pmbus_read_word_data(client, 0, + MAX8688_MFG_STATUS); + if (mfg_status < 0) + return mfg_status; + if (mfg_status & MAX8688_STATUS_OT_WARNING) + ret |= PB_TEMP_OT_WARNING; + if (mfg_status & MAX8688_STATUS_OT_FAULT) + ret |= PB_TEMP_OT_FAULT; + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + +static struct pmbus_driver_info max8688_info = { + .pages = 1, + .direct[PSC_VOLTAGE_IN] = true, + .direct[PSC_VOLTAGE_OUT] = true, + .direct[PSC_TEMPERATURE] = true, + .direct[PSC_CURRENT_OUT] = true, + .m[PSC_VOLTAGE_IN] = 19995, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -1, + .m[PSC_VOLTAGE_OUT] = 19995, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = -1, + .m[PSC_CURRENT_OUT] = 23109, + .b[PSC_CURRENT_OUT] = 0, + .R[PSC_CURRENT_OUT] = -2, + .m[PSC_TEMPERATURE] = -7612, + .b[PSC_TEMPERATURE] = 335, + .R[PSC_TEMPERATURE] = -3, + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_STATUS_TEMP, + .read_byte_data = max8688_read_byte_data, +}; + +static int max8688_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &max8688_info); +} + +static int max8688_remove(struct i2c_client *client) +{ + return pmbus_do_remove(client); +} + +static const struct i2c_device_id max8688_id[] = { + {"max8688", 0}, + { } +}; + +MODULE_DEVICE_TABLE(i2c, max8688_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver max8688_driver = { + .driver = { + .name = "max8688", + }, + .probe = max8688_probe, + .remove = max8688_remove, + .id_table = max8688_id, +}; + +static int __init max8688_init(void) +{ + return i2c_add_driver(&max8688_driver); +} + +static void __exit max8688_exit(void) +{ + i2c_del_driver(&max8688_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus driver for Maxim MAX8688"); +MODULE_LICENSE("GPL"); +module_init(max8688_init); +module_exit(max8688_exit); diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c new file mode 100644 index 0000000..9b1f0c3 --- /dev/null +++ b/drivers/hwmon/pmbus/pmbus.c @@ -0,0 +1,210 @@ +/* + * Hardware monitoring driver for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include "pmbus.h" + +/* + * Find sensor groups and status registers on each page. + */ +static void pmbus_find_sensor_groups(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int page; + + /* Sensors detected on page 0 only */ + if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN)) + info->func[0] |= PMBUS_HAVE_VIN; + if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP)) + info->func[0] |= PMBUS_HAVE_VCAP; + if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN)) + info->func[0] |= PMBUS_HAVE_IIN; + if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN)) + info->func[0] |= PMBUS_HAVE_PIN; + if (info->func[0] + && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) + info->func[0] |= PMBUS_HAVE_STATUS_INPUT; + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { + info->func[0] |= PMBUS_HAVE_FAN12; + if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN12; + } + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { + info->func[0] |= PMBUS_HAVE_FAN34; + if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN34; + } + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) + info->func[0] |= PMBUS_HAVE_TEMP; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) + info->func[0] |= PMBUS_HAVE_TEMP2; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) + info->func[0] |= PMBUS_HAVE_TEMP3; + if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3) + && pmbus_check_byte_register(client, 0, + PMBUS_STATUS_TEMPERATURE)) + info->func[0] |= PMBUS_HAVE_STATUS_TEMP; + + /* Sensors detected on all pages */ + for (page = 0; page < info->pages; page++) { + if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) { + info->func[page] |= PMBUS_HAVE_VOUT; + if (pmbus_check_byte_register(client, page, + PMBUS_STATUS_VOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_VOUT; + } + if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) { + info->func[page] |= PMBUS_HAVE_IOUT; + if (pmbus_check_byte_register(client, 0, + PMBUS_STATUS_IOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_IOUT; + } + if (pmbus_check_word_register(client, page, PMBUS_READ_POUT)) + info->func[page] |= PMBUS_HAVE_POUT; + } +} + +/* + * Identify chip parameters. + */ +static int pmbus_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + if (!info->pages) { + /* + * Check if the PAGE command is supported. If it is, + * keep setting the page number until it fails or until the + * maximum number of pages has been reached. Assume that + * this is the number of pages supported by the chip. + */ + if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) { + int page; + + for (page = 1; page < PMBUS_PAGES; page++) { + if (pmbus_set_page(client, page) < 0) + break; + } + pmbus_set_page(client, 0); + info->pages = page; + } else { + info->pages = 1; + } + } + + /* + * We should check if the COEFFICIENTS register is supported. + * If it is, and the chip is configured for direct mode, we can read + * the coefficients from the chip, one set per group of sensor + * registers. + * + * To do this, we will need access to a chip which actually supports the + * COEFFICIENTS command, since the command is too complex to implement + * without testing it. + */ + + /* Try to find sensor groups */ + pmbus_find_sensor_groups(client, info); + + return 0; +} + +static int pmbus_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pmbus_driver_info *info; + int ret; + + info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pages = id->driver_data; + info->identify = pmbus_identify; + + ret = pmbus_do_probe(client, id, info); + if (ret < 0) + goto out; + return 0; + +out: + kfree(info); + return ret; +} + +static int pmbus_remove(struct i2c_client *client) +{ + int ret; + const struct pmbus_driver_info *info; + + info = pmbus_get_driver_info(client); + ret = pmbus_do_remove(client); + kfree(info); + return ret; +} + +/* + * Use driver_data to set the number of pages supported by the chip. + */ +static const struct i2c_device_id pmbus_id[] = { + {"bmr450", 1}, + {"bmr451", 1}, + {"bmr453", 1}, + {"bmr454", 1}, + {"ltc2978", 8}, + {"pmbus", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, pmbus_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver pmbus_driver = { + .driver = { + .name = "pmbus", + }, + .probe = pmbus_probe, + .remove = pmbus_remove, + .id_table = pmbus_id, +}; + +static int __init pmbus_init(void) +{ + return i2c_add_driver(&pmbus_driver); +} + +static void __exit pmbus_exit(void) +{ + i2c_del_driver(&pmbus_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("Generic PMBus driver"); +MODULE_LICENSE("GPL"); +module_init(pmbus_init); +module_exit(pmbus_exit); diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h new file mode 100644 index 0000000..50647ab --- /dev/null +++ b/drivers/hwmon/pmbus/pmbus.h @@ -0,0 +1,311 @@ +/* + * pmbus.h - Common defines and structures for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PMBUS_H +#define PMBUS_H + +/* + * Registers + */ +#define PMBUS_PAGE 0x00 +#define PMBUS_OPERATION 0x01 +#define PMBUS_ON_OFF_CONFIG 0x02 +#define PMBUS_CLEAR_FAULTS 0x03 +#define PMBUS_PHASE 0x04 + +#define PMBUS_CAPABILITY 0x19 +#define PMBUS_QUERY 0x1A + +#define PMBUS_VOUT_MODE 0x20 +#define PMBUS_VOUT_COMMAND 0x21 +#define PMBUS_VOUT_TRIM 0x22 +#define PMBUS_VOUT_CAL_OFFSET 0x23 +#define PMBUS_VOUT_MAX 0x24 +#define PMBUS_VOUT_MARGIN_HIGH 0x25 +#define PMBUS_VOUT_MARGIN_LOW 0x26 +#define PMBUS_VOUT_TRANSITION_RATE 0x27 +#define PMBUS_VOUT_DROOP 0x28 +#define PMBUS_VOUT_SCALE_LOOP 0x29 +#define PMBUS_VOUT_SCALE_MONITOR 0x2A + +#define PMBUS_COEFFICIENTS 0x30 +#define PMBUS_POUT_MAX 0x31 + +#define PMBUS_FAN_CONFIG_12 0x3A +#define PMBUS_FAN_COMMAND_1 0x3B +#define PMBUS_FAN_COMMAND_2 0x3C +#define PMBUS_FAN_CONFIG_34 0x3D +#define PMBUS_FAN_COMMAND_3 0x3E +#define PMBUS_FAN_COMMAND_4 0x3F + +#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40 +#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41 +#define PMBUS_VOUT_OV_WARN_LIMIT 0x42 +#define PMBUS_VOUT_UV_WARN_LIMIT 0x43 +#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44 +#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45 +#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46 +#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47 +#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48 +#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49 +#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A +#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B +#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C + +#define PMBUS_OT_FAULT_LIMIT 0x4F +#define PMBUS_OT_FAULT_RESPONSE 0x50 +#define PMBUS_OT_WARN_LIMIT 0x51 +#define PMBUS_UT_WARN_LIMIT 0x52 +#define PMBUS_UT_FAULT_LIMIT 0x53 +#define PMBUS_UT_FAULT_RESPONSE 0x54 +#define PMBUS_VIN_OV_FAULT_LIMIT 0x55 +#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56 +#define PMBUS_VIN_OV_WARN_LIMIT 0x57 +#define PMBUS_VIN_UV_WARN_LIMIT 0x58 +#define PMBUS_VIN_UV_FAULT_LIMIT 0x59 + +#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B +#define PMBUS_IIN_OC_WARN_LIMIT 0x5D + +#define PMBUS_POUT_OP_FAULT_LIMIT 0x68 +#define PMBUS_POUT_OP_WARN_LIMIT 0x6A +#define PMBUS_PIN_OP_WARN_LIMIT 0x6B + +#define PMBUS_STATUS_BYTE 0x78 +#define PMBUS_STATUS_WORD 0x79 +#define PMBUS_STATUS_VOUT 0x7A +#define PMBUS_STATUS_IOUT 0x7B +#define PMBUS_STATUS_INPUT 0x7C +#define PMBUS_STATUS_TEMPERATURE 0x7D +#define PMBUS_STATUS_CML 0x7E +#define PMBUS_STATUS_OTHER 0x7F +#define PMBUS_STATUS_MFR_SPECIFIC 0x80 +#define PMBUS_STATUS_FAN_12 0x81 +#define PMBUS_STATUS_FAN_34 0x82 + +#define PMBUS_READ_VIN 0x88 +#define PMBUS_READ_IIN 0x89 +#define PMBUS_READ_VCAP 0x8A +#define PMBUS_READ_VOUT 0x8B +#define PMBUS_READ_IOUT 0x8C +#define PMBUS_READ_TEMPERATURE_1 0x8D +#define PMBUS_READ_TEMPERATURE_2 0x8E +#define PMBUS_READ_TEMPERATURE_3 0x8F +#define PMBUS_READ_FAN_SPEED_1 0x90 +#define PMBUS_READ_FAN_SPEED_2 0x91 +#define PMBUS_READ_FAN_SPEED_3 0x92 +#define PMBUS_READ_FAN_SPEED_4 0x93 +#define PMBUS_READ_DUTY_CYCLE 0x94 +#define PMBUS_READ_FREQUENCY 0x95 +#define PMBUS_READ_POUT 0x96 +#define PMBUS_READ_PIN 0x97 + +#define PMBUS_REVISION 0x98 +#define PMBUS_MFR_ID 0x99 +#define PMBUS_MFR_MODEL 0x9A +#define PMBUS_MFR_REVISION 0x9B +#define PMBUS_MFR_LOCATION 0x9C +#define PMBUS_MFR_DATE 0x9D +#define PMBUS_MFR_SERIAL 0x9E + +/* + * CAPABILITY + */ +#define PB_CAPABILITY_SMBALERT (1<<4) +#define PB_CAPABILITY_ERROR_CHECK (1<<7) + +/* + * VOUT_MODE + */ +#define PB_VOUT_MODE_MODE_MASK 0xe0 +#define PB_VOUT_MODE_PARAM_MASK 0x1f + +#define PB_VOUT_MODE_LINEAR 0x00 +#define PB_VOUT_MODE_VID 0x20 +#define PB_VOUT_MODE_DIRECT 0x40 + +/* + * Fan configuration + */ +#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1)) +#define PB_FAN_2_RPM (1 << 2) +#define PB_FAN_2_INSTALLED (1 << 3) +#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5)) +#define PB_FAN_1_RPM (1 << 6) +#define PB_FAN_1_INSTALLED (1 << 7) + +/* + * STATUS_BYTE, STATUS_WORD (lower) + */ +#define PB_STATUS_NONE_ABOVE (1<<0) +#define PB_STATUS_CML (1<<1) +#define PB_STATUS_TEMPERATURE (1<<2) +#define PB_STATUS_VIN_UV (1<<3) +#define PB_STATUS_IOUT_OC (1<<4) +#define PB_STATUS_VOUT_OV (1<<5) +#define PB_STATUS_OFF (1<<6) +#define PB_STATUS_BUSY (1<<7) + +/* + * STATUS_WORD (upper) + */ +#define PB_STATUS_UNKNOWN (1<<8) +#define PB_STATUS_OTHER (1<<9) +#define PB_STATUS_FANS (1<<10) +#define PB_STATUS_POWER_GOOD_N (1<<11) +#define PB_STATUS_WORD_MFR (1<<12) +#define PB_STATUS_INPUT (1<<13) +#define PB_STATUS_IOUT_POUT (1<<14) +#define PB_STATUS_VOUT (1<<15) + +/* + * STATUS_IOUT + */ +#define PB_POUT_OP_WARNING (1<<0) +#define PB_POUT_OP_FAULT (1<<1) +#define PB_POWER_LIMITING (1<<2) +#define PB_CURRENT_SHARE_FAULT (1<<3) +#define PB_IOUT_UC_FAULT (1<<4) +#define PB_IOUT_OC_WARNING (1<<5) +#define PB_IOUT_OC_LV_FAULT (1<<6) +#define PB_IOUT_OC_FAULT (1<<7) + +/* + * STATUS_VOUT, STATUS_INPUT + */ +#define PB_VOLTAGE_UV_FAULT (1<<4) +#define PB_VOLTAGE_UV_WARNING (1<<5) +#define PB_VOLTAGE_OV_WARNING (1<<6) +#define PB_VOLTAGE_OV_FAULT (1<<7) + +/* + * STATUS_INPUT + */ +#define PB_PIN_OP_WARNING (1<<0) +#define PB_IIN_OC_WARNING (1<<1) +#define PB_IIN_OC_FAULT (1<<2) + +/* + * STATUS_TEMPERATURE + */ +#define PB_TEMP_UT_FAULT (1<<4) +#define PB_TEMP_UT_WARNING (1<<5) +#define PB_TEMP_OT_WARNING (1<<6) +#define PB_TEMP_OT_FAULT (1<<7) + +/* + * STATUS_FAN + */ +#define PB_FAN_AIRFLOW_WARNING (1<<0) +#define PB_FAN_AIRFLOW_FAULT (1<<1) +#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2) +#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3) +#define PB_FAN_FAN2_WARNING (1<<4) +#define PB_FAN_FAN1_WARNING (1<<5) +#define PB_FAN_FAN2_FAULT (1<<6) +#define PB_FAN_FAN1_FAULT (1<<7) + +/* + * CML_FAULT_STATUS + */ +#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0) +#define PB_CML_FAULT_OTHER_COMM (1<<1) +#define PB_CML_FAULT_PROCESSOR (1<<3) +#define PB_CML_FAULT_MEMORY (1<<4) +#define PB_CML_FAULT_PACKET_ERROR (1<<5) +#define PB_CML_FAULT_INVALID_DATA (1<<6) +#define PB_CML_FAULT_INVALID_COMMAND (1<<7) + +enum pmbus_sensor_classes { + PSC_VOLTAGE_IN = 0, + PSC_VOLTAGE_OUT, + PSC_CURRENT_IN, + PSC_CURRENT_OUT, + PSC_POWER, + PSC_TEMPERATURE, + PSC_FAN, + PSC_NUM_CLASSES /* Number of power sensor classes */ +}; + +#define PMBUS_PAGES 32 /* Per PMBus specification */ + +/* Functionality bit mask */ +#define PMBUS_HAVE_VIN (1 << 0) +#define PMBUS_HAVE_VCAP (1 << 1) +#define PMBUS_HAVE_VOUT (1 << 2) +#define PMBUS_HAVE_IIN (1 << 3) +#define PMBUS_HAVE_IOUT (1 << 4) +#define PMBUS_HAVE_PIN (1 << 5) +#define PMBUS_HAVE_POUT (1 << 6) +#define PMBUS_HAVE_FAN12 (1 << 7) +#define PMBUS_HAVE_FAN34 (1 << 8) +#define PMBUS_HAVE_TEMP (1 << 9) +#define PMBUS_HAVE_TEMP2 (1 << 10) +#define PMBUS_HAVE_TEMP3 (1 << 11) +#define PMBUS_HAVE_STATUS_VOUT (1 << 12) +#define PMBUS_HAVE_STATUS_IOUT (1 << 13) +#define PMBUS_HAVE_STATUS_INPUT (1 << 14) +#define PMBUS_HAVE_STATUS_TEMP (1 << 15) +#define PMBUS_HAVE_STATUS_FAN12 (1 << 16) +#define PMBUS_HAVE_STATUS_FAN34 (1 << 17) + +struct pmbus_driver_info { + int pages; /* Total number of pages */ + bool direct[PSC_NUM_CLASSES]; + /* true if device uses direct data format + for the given sensor class */ + /* + * Support one set of coefficients for each sensor type + * Used for chips providing data in direct mode. + */ + int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ + int b[PSC_NUM_CLASSES]; /* offset */ + int R[PSC_NUM_CLASSES]; /* exponent */ + + u32 func[PMBUS_PAGES]; /* Functionality, per page */ + /* + * The following functions map manufacturing specific register values + * to PMBus standard register values. Specify only if mapping is + * necessary. + */ + int (*read_byte_data)(struct i2c_client *client, int page, int reg); + /* + * The identify function determines supported PMBus functionality. + * This function is only necessary if a chip driver supports multiple + * chips, and the chip functionality is not pre-determined. + */ + int (*identify)(struct i2c_client *client, + struct pmbus_driver_info *info); +}; + +/* Function declarations */ + +int pmbus_set_page(struct i2c_client *client, u8 page); +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); +void pmbus_clear_faults(struct i2c_client *client); +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info); +int pmbus_do_remove(struct i2c_client *client); +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client + *client); + +#endif /* PMBUS_H */ diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c new file mode 100644 index 0000000..8e31a8e --- /dev/null +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -0,0 +1,1567 @@ +/* + * Hardware monitoring driver for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/delay.h> +#include <linux/i2c/pmbus.h> +#include "pmbus.h" + +/* + * Constants needed to determine number of sensors, booleans, and labels. + */ +#define PMBUS_MAX_INPUT_SENSORS 11 /* 6*volt, 3*curr, 2*power */ +#define PMBUS_VOUT_SENSORS_PER_PAGE 5 /* input, min, max, lcrit, + crit */ +#define PMBUS_IOUT_SENSORS_PER_PAGE 4 /* input, min, max, crit */ +#define PMBUS_POUT_SENSORS_PER_PAGE 4 /* input, cap, max, crit */ +#define PMBUS_MAX_SENSORS_PER_FAN 1 /* input */ +#define PMBUS_MAX_SENSORS_PER_TEMP 5 /* input, min, max, lcrit, + crit */ + +#define PMBUS_MAX_INPUT_BOOLEANS 7 /* v: min_alarm, max_alarm, + lcrit_alarm, crit_alarm; + c: alarm, crit_alarm; + p: crit_alarm */ +#define PMBUS_VOUT_BOOLEANS_PER_PAGE 4 /* min_alarm, max_alarm, + lcrit_alarm, crit_alarm */ +#define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm, + crit_alarm */ +#define PMBUS_POUT_BOOLEANS_PER_PAGE 2 /* alarm, crit_alarm */ +#define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */ +#define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm, + lcrit_alarm, crit_alarm */ + +#define PMBUS_MAX_INPUT_LABELS 4 /* vin, vcap, iin, pin */ + +/* + * status, status_vout, status_iout, status_fans, status_fan34, and status_temp + * are paged. status_input is unpaged. + */ +#define PB_NUM_STATUS_REG (PMBUS_PAGES * 6 + 1) + +/* + * Index into status register array, per status register group + */ +#define PB_STATUS_BASE 0 +#define PB_STATUS_VOUT_BASE (PB_STATUS_BASE + PMBUS_PAGES) +#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES) +#define PB_STATUS_INPUT_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES) +#define PB_STATUS_TEMP_BASE (PB_STATUS_INPUT_BASE + 1) + +struct pmbus_sensor { + char name[I2C_NAME_SIZE]; /* sysfs sensor name */ + struct sensor_device_attribute attribute; + u8 page; /* page number */ + u8 reg; /* register */ + enum pmbus_sensor_classes class; /* sensor class */ + bool update; /* runtime sensor update needed */ + int data; /* Sensor data. + Negative if there was a read error */ +}; + +struct pmbus_boolean { + char name[I2C_NAME_SIZE]; /* sysfs boolean name */ + struct sensor_device_attribute attribute; +}; + +struct pmbus_label { + char name[I2C_NAME_SIZE]; /* sysfs label name */ + struct sensor_device_attribute attribute; + char label[I2C_NAME_SIZE]; /* label */ +}; + +struct pmbus_data { + struct device *hwmon_dev; + + u32 flags; /* from platform data */ + + int exponent; /* linear mode: exponent for output voltages */ + + const struct pmbus_driver_info *info; + + int max_attributes; + int num_attributes; + struct attribute **attributes; + struct attribute_group group; + + /* + * Sensors cover both sensor and limit registers. + */ + int max_sensors; + int num_sensors; + struct pmbus_sensor *sensors; + /* + * Booleans are used for alarms. + * Values are determined from status registers. + */ + int max_booleans; + int num_booleans; + struct pmbus_boolean *booleans; + /* + * Labels are used to map generic names (e.g., "in1") + * to PMBus specific names (e.g., "vin" or "vout1"). + */ + int max_labels; + int num_labels; + struct pmbus_label *labels; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* + * A single status register covers multiple attributes, + * so we keep them all together. + */ + u8 status[PB_NUM_STATUS_REG]; + + u8 currpage; +}; + +int pmbus_set_page(struct i2c_client *client, u8 page) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int rv = 0; + int newpage; + + if (page != data->currpage) { + rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE); + if (newpage != page) + rv = -EINVAL; + else + data->currpage = page; + } + return rv; +} +EXPORT_SYMBOL_GPL(pmbus_set_page); + +static int pmbus_write_byte(struct i2c_client *client, u8 page, u8 value) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_write_byte(client, value); +} + +static int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, + u16 word) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_write_word_data(client, reg, word); +} + +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_read_word_data(client, reg); +} +EXPORT_SYMBOL_GPL(pmbus_read_word_data); + +static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_read_byte_data(client, reg); +} + +static void pmbus_clear_fault_page(struct i2c_client *client, int page) +{ + pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); +} + +void pmbus_clear_faults(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < data->info->pages; i++) + pmbus_clear_fault_page(client, i); +} +EXPORT_SYMBOL_GPL(pmbus_clear_faults); + +static int pmbus_check_status_cml(struct i2c_client *client, int page) +{ + int status, status2; + + status = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE); + if (status < 0 || (status & PB_STATUS_CML)) { + status2 = pmbus_read_byte_data(client, page, PMBUS_STATUS_CML); + if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) + return -EINVAL; + } + return 0; +} + +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg) +{ + int rv; + struct pmbus_data *data = i2c_get_clientdata(client); + + rv = pmbus_read_byte_data(client, page, reg); + if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK)) + rv = pmbus_check_status_cml(client, page); + pmbus_clear_fault_page(client, page); + return rv >= 0; +} +EXPORT_SYMBOL_GPL(pmbus_check_byte_register); + +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg) +{ + int rv; + struct pmbus_data *data = i2c_get_clientdata(client); + + rv = pmbus_read_word_data(client, page, reg); + if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK)) + rv = pmbus_check_status_cml(client, page); + pmbus_clear_fault_page(client, page); + return rv >= 0; +} +EXPORT_SYMBOL_GPL(pmbus_check_word_register); + +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + + return data->info; +} +EXPORT_SYMBOL_GPL(pmbus_get_driver_info); + +/* + * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if + * a device specific mapping funcion exists and calls it if necessary. + */ +static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->read_byte_data) { + status = info->read_byte_data(client, page, reg); + if (status != -ENODATA) + return status; + } + return pmbus_read_byte_data(client, page, reg); +} + +static struct pmbus_data *pmbus_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + + mutex_lock(&data->update_lock); + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int i; + + for (i = 0; i < info->pages; i++) + data->status[PB_STATUS_BASE + i] + = pmbus_read_byte_data(client, i, + PMBUS_STATUS_BYTE); + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT)) + continue; + data->status[PB_STATUS_VOUT_BASE + i] + = _pmbus_read_byte_data(client, i, PMBUS_STATUS_VOUT); + } + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_IOUT)) + continue; + data->status[PB_STATUS_IOUT_BASE + i] + = _pmbus_read_byte_data(client, i, PMBUS_STATUS_IOUT); + } + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_TEMP)) + continue; + data->status[PB_STATUS_TEMP_BASE + i] + = _pmbus_read_byte_data(client, i, + PMBUS_STATUS_TEMPERATURE); + } + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN12)) + continue; + data->status[PB_STATUS_FAN_BASE + i] + = _pmbus_read_byte_data(client, i, + PMBUS_STATUS_FAN_12); + } + + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN34)) + continue; + data->status[PB_STATUS_FAN34_BASE + i] + = _pmbus_read_byte_data(client, i, + PMBUS_STATUS_FAN_34); + } + + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) + data->status[PB_STATUS_INPUT_BASE] + = _pmbus_read_byte_data(client, 0, + PMBUS_STATUS_INPUT); + + for (i = 0; i < data->num_sensors; i++) { + struct pmbus_sensor *sensor = &data->sensors[i]; + + if (!data->valid || sensor->update) + sensor->data + = pmbus_read_word_data(client, sensor->page, + sensor->reg); + } + pmbus_clear_faults(client); + data->last_updated = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Convert linear sensor values to milli- or micro-units + * depending on sensor type. + */ +static long pmbus_reg2data_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + s16 exponent; + s32 mantissa; + long val; + + if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */ + exponent = data->exponent; + mantissa = (u16) sensor->data; + } else { /* LINEAR11 */ + exponent = (sensor->data >> 11) & 0x001f; + mantissa = sensor->data & 0x07ff; + + if (exponent > 0x0f) + exponent |= 0xffe0; /* sign extend exponent */ + if (mantissa > 0x03ff) + mantissa |= 0xfffff800; /* sign extend mantissa */ + } + + val = mantissa; + + /* scale result to milli-units for all sensors except fans */ + if (sensor->class != PSC_FAN) + val = val * 1000L; + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) + val = val * 1000L; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +/* + * Convert direct sensor values to milli- or micro-units + * depending on sensor type. + */ +static long pmbus_reg2data_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + long val = (s16) sensor->data; + long m, b, R; + + m = data->info->m[sensor->class]; + b = data->info->b[sensor->class]; + R = data->info->R[sensor->class]; + + if (m == 0) + return 0; + + /* X = 1/m * (Y * 10^-R - b) */ + R = -R; + /* scale result to milli-units for everything but fans */ + if (sensor->class != PSC_FAN) { + R += 3; + b *= 1000; + } + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) { + R += 3; + b *= 1000; + } + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return (val - b) / m; +} + +static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) +{ + long val; + + if (data->info->direct[sensor->class]) + val = pmbus_reg2data_direct(data, sensor); + else + val = pmbus_reg2data_linear(data, sensor); + + return val; +} + +#define MAX_MANTISSA (1023 * 1000) +#define MIN_MANTISSA (511 * 1000) + +static u16 pmbus_data2reg_linear(struct pmbus_data *data, + enum pmbus_sensor_classes class, long val) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + /* simple case */ + if (val == 0) + return 0; + + if (class == PSC_VOLTAGE_OUT) { + /* LINEAR16 does not support negative voltages */ + if (val < 0) + return 0; + + /* + * For a static exponents, we don't have a choice + * but to adjust the value to it. + */ + if (data->exponent < 0) + val <<= -data->exponent; + else + val >>= data->exponent; + val = DIV_ROUND_CLOSEST(val, 1000); + return val & 0xffff; + } + + if (val < 0) { + negative = true; + val = -val; + } + + /* Power is in uW. Convert to mW before converting. */ + if (class == PSC_POWER) + val = DIV_ROUND_CLOSEST(val, 1000L); + + /* + * For simplicity, convert fan data to milli-units + * before calculating the exponent. + */ + if (class == PSC_FAN) + val = val * 1000; + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = DIV_ROUND_CLOSEST(val, 1000); + + /* Ensure that resulting number is within range */ + if (mantissa > 0x3ff) + mantissa = 0x3ff; + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + +static u16 pmbus_data2reg_direct(struct pmbus_data *data, + enum pmbus_sensor_classes class, long val) +{ + long m, b, R; + + m = data->info->m[class]; + b = data->info->b[class]; + R = data->info->R[class]; + + /* Power is in uW. Adjust R and b. */ + if (class == PSC_POWER) { + R -= 3; + b *= 1000; + } + + /* Calculate Y = (m * X + b) * 10^R */ + if (class != PSC_FAN) { + R -= 3; /* Adjust R and b for data in milli-units */ + b *= 1000; + } + val = val * m + b; + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return val; +} + +static u16 pmbus_data2reg(struct pmbus_data *data, + enum pmbus_sensor_classes class, long val) +{ + u16 regval; + + if (data->info->direct[class]) + regval = pmbus_data2reg_direct(data, class, val); + else + regval = pmbus_data2reg_linear(data, class, val); + + return regval; +} + +/* + * Return boolean calculated from converted data. + * <index> defines a status register index and mask, and optionally + * two sensor indexes. + * The upper half-word references the two sensors, + * two sensor indices. + * The upper half-word references the two optional sensors, + * the lower half word references status register and mask. + * The function returns true if (status[reg] & mask) is true and, + * if specified, if v1 >= v2. + * To determine if an object exceeds upper limits, specify <v, limit>. + * To determine if an object exceeds lower limits, specify <limit, v>. + * + * For booleans created with pmbus_add_boolean_reg(), only the lower 16 bits of + * index are set. s1 and s2 (the sensor index values) are zero in this case. + * The function returns true if (status[reg] & mask) is true. + * + * If the boolean was created with pmbus_add_boolean_cmp(), a comparison against + * a specified limit has to be performed to determine the boolean result. + * In this case, the function returns true if v1 >= v2 (where v1 and v2 are + * sensor values referenced by sensor indices s1 and s2). + * + * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>. + * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>. + * + * If a negative value is stored in any of the referenced registers, this value + * reflects an error code which will be returned. + */ +static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) +{ + u8 s1 = (index >> 24) & 0xff; + u8 s2 = (index >> 16) & 0xff; + u8 reg = (index >> 8) & 0xff; + u8 mask = index & 0xff; + int status; + u8 regval; + + status = data->status[reg]; + if (status < 0) + return status; + + regval = status & mask; + if (!s1 && !s2) + *val = !!regval; + else { + long v1, v2; + struct pmbus_sensor *sensor1, *sensor2; + + sensor1 = &data->sensors[s1]; + if (sensor1->data < 0) + return sensor1->data; + sensor2 = &data->sensors[s2]; + if (sensor2->data < 0) + return sensor2->data; + + v1 = pmbus_reg2data(data, sensor1); + v2 = pmbus_reg2data(data, sensor2); + *val = !!(regval && v1 >= v2); + } + return 0; +} + +static ssize_t pmbus_show_boolean(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pmbus_data *data = pmbus_update_device(dev); + int val; + int err; + + err = pmbus_get_boolean(data, attr->index, &val); + if (err) + return err; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t pmbus_show_sensor(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pmbus_data *data = pmbus_update_device(dev); + struct pmbus_sensor *sensor; + + sensor = &data->sensors[attr->index]; + if (sensor->data < 0) + return sensor->data; + + return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor)); +} + +static ssize_t pmbus_set_sensor(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pmbus_data *data = i2c_get_clientdata(client); + struct pmbus_sensor *sensor = &data->sensors[attr->index]; + ssize_t rv = count; + long val = 0; + int ret; + u16 regval; + + if (strict_strtol(buf, 10, &val) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + regval = pmbus_data2reg(data, sensor->class, val); + ret = pmbus_write_word_data(client, sensor->page, sensor->reg, regval); + if (ret < 0) + rv = ret; + else + data->sensors[attr->index].data = regval; + mutex_unlock(&data->update_lock); + return rv; +} + +static ssize_t pmbus_show_label(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pmbus_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + + return snprintf(buf, PAGE_SIZE, "%s\n", + data->labels[attr->index].label); +} + +#define PMBUS_ADD_ATTR(data, _name, _idx, _mode, _type, _show, _set) \ +do { \ + struct sensor_device_attribute *a \ + = &data->_type##s[data->num_##_type##s].attribute; \ + BUG_ON(data->num_attributes >= data->max_attributes); \ + sysfs_attr_init(&a->dev_attr.attr); \ + a->dev_attr.attr.name = _name; \ + a->dev_attr.attr.mode = _mode; \ + a->dev_attr.show = _show; \ + a->dev_attr.store = _set; \ + a->index = _idx; \ + data->attributes[data->num_attributes] = &a->dev_attr.attr; \ + data->num_attributes++; \ +} while (0) + +#define PMBUS_ADD_GET_ATTR(data, _name, _type, _idx) \ + PMBUS_ADD_ATTR(data, _name, _idx, S_IRUGO, _type, \ + pmbus_show_##_type, NULL) + +#define PMBUS_ADD_SET_ATTR(data, _name, _type, _idx) \ + PMBUS_ADD_ATTR(data, _name, _idx, S_IWUSR | S_IRUGO, _type, \ + pmbus_show_##_type, pmbus_set_##_type) + +static void pmbus_add_boolean(struct pmbus_data *data, + const char *name, const char *type, int seq, + int idx) +{ + struct pmbus_boolean *boolean; + + BUG_ON(data->num_booleans >= data->max_booleans); + + boolean = &data->booleans[data->num_booleans]; + + snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s", + name, seq, type); + PMBUS_ADD_GET_ATTR(data, boolean->name, boolean, idx); + data->num_booleans++; +} + +static void pmbus_add_boolean_reg(struct pmbus_data *data, + const char *name, const char *type, + int seq, int reg, int bit) +{ + pmbus_add_boolean(data, name, type, seq, (reg << 8) | bit); +} + +static void pmbus_add_boolean_cmp(struct pmbus_data *data, + const char *name, const char *type, + int seq, int i1, int i2, int reg, int mask) +{ + pmbus_add_boolean(data, name, type, seq, + (i1 << 24) | (i2 << 16) | (reg << 8) | mask); +} + +static void pmbus_add_sensor(struct pmbus_data *data, + const char *name, const char *type, int seq, + int page, int reg, enum pmbus_sensor_classes class, + bool update, bool readonly) +{ + struct pmbus_sensor *sensor; + + BUG_ON(data->num_sensors >= data->max_sensors); + + sensor = &data->sensors[data->num_sensors]; + snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s", + name, seq, type); + sensor->page = page; + sensor->reg = reg; + sensor->class = class; + sensor->update = update; + if (readonly) + PMBUS_ADD_GET_ATTR(data, sensor->name, sensor, + data->num_sensors); + else + PMBUS_ADD_SET_ATTR(data, sensor->name, sensor, + data->num_sensors); + data->num_sensors++; +} + +static void pmbus_add_label(struct pmbus_data *data, + const char *name, int seq, + const char *lstring, int index) +{ + struct pmbus_label *label; + + BUG_ON(data->num_labels >= data->max_labels); + + label = &data->labels[data->num_labels]; + snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq); + if (!index) + strncpy(label->label, lstring, sizeof(label->label) - 1); + else + snprintf(label->label, sizeof(label->label), "%s%d", lstring, + index); + + PMBUS_ADD_GET_ATTR(data, label->name, label, data->num_labels); + data->num_labels++; +} + +/* + * Determine maximum number of sensors, booleans, and labels. + * To keep things simple, only make a rough high estimate. + */ +static void pmbus_find_max_attr(struct i2c_client *client, + struct pmbus_data *data) +{ + const struct pmbus_driver_info *info = data->info; + int page, max_sensors, max_booleans, max_labels; + + max_sensors = PMBUS_MAX_INPUT_SENSORS; + max_booleans = PMBUS_MAX_INPUT_BOOLEANS; + max_labels = PMBUS_MAX_INPUT_LABELS; + + for (page = 0; page < info->pages; page++) { + if (info->func[page] & PMBUS_HAVE_VOUT) { + max_sensors += PMBUS_VOUT_SENSORS_PER_PAGE; + max_booleans += PMBUS_VOUT_BOOLEANS_PER_PAGE; + max_labels++; + } + if (info->func[page] & PMBUS_HAVE_IOUT) { + max_sensors += PMBUS_IOUT_SENSORS_PER_PAGE; + max_booleans += PMBUS_IOUT_BOOLEANS_PER_PAGE; + max_labels++; + } + if (info->func[page] & PMBUS_HAVE_POUT) { + max_sensors += PMBUS_POUT_SENSORS_PER_PAGE; + max_booleans += PMBUS_POUT_BOOLEANS_PER_PAGE; + max_labels++; + } + if (info->func[page] & PMBUS_HAVE_FAN12) { + max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN; + max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN; + } + if (info->func[page] & PMBUS_HAVE_FAN34) { + max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN; + max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN; + } + if (info->func[page] & PMBUS_HAVE_TEMP) { + max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; + max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; + } + if (info->func[page] & PMBUS_HAVE_TEMP2) { + max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; + max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; + } + if (info->func[page] & PMBUS_HAVE_TEMP3) { + max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; + max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; + } + } + data->max_sensors = max_sensors; + data->max_booleans = max_booleans; + data->max_labels = max_labels; + data->max_attributes = max_sensors + max_booleans + max_labels; +} + +/* + * Search for attributes. Allocate sensors, booleans, and labels as needed. + */ + +/* + * The pmbus_limit_attr structure describes a single limit attribute + * and its associated alarm attribute. + */ +struct pmbus_limit_attr { + u8 reg; /* Limit register */ + const char *attr; /* Attribute name */ + const char *alarm; /* Alarm attribute name */ + u32 sbit; /* Alarm attribute status bit */ +}; + +/* + * The pmbus_sensor_attr structure describes one sensor attribute. This + * description includes a reference to the associated limit attributes. + */ +struct pmbus_sensor_attr { + u8 reg; /* sensor register */ + enum pmbus_sensor_classes class;/* sensor class */ + const char *label; /* sensor label */ + bool paged; /* true if paged sensor */ + bool update; /* true if update needed */ + bool compare; /* true if compare function needed */ + u32 func; /* sensor mask */ + u32 sfunc; /* sensor status mask */ + int sbase; /* status base register */ + u32 gbit; /* generic status bit */ + const struct pmbus_limit_attr *limit;/* limit registers */ + int nlimit; /* # of limit registers */ +}; + +/* + * Add a set of limit attributes and, if supported, the associated + * alarm attributes. + */ +static bool pmbus_add_limit_attrs(struct i2c_client *client, + struct pmbus_data *data, + const struct pmbus_driver_info *info, + const char *name, int index, int page, + int cbase, + const struct pmbus_sensor_attr *attr) +{ + const struct pmbus_limit_attr *l = attr->limit; + int nlimit = attr->nlimit; + bool have_alarm = false; + int i, cindex; + + for (i = 0; i < nlimit; i++) { + if (pmbus_check_word_register(client, page, l->reg)) { + cindex = data->num_sensors; + pmbus_add_sensor(data, name, l->attr, index, page, + l->reg, attr->class, attr->update, + false); + if (info->func[page] & attr->sfunc) { + if (attr->compare) { + pmbus_add_boolean_cmp(data, name, + l->alarm, index, + cbase, cindex, + attr->sbase + page, l->sbit); + } else { + pmbus_add_boolean_reg(data, name, + l->alarm, index, + attr->sbase + page, l->sbit); + } + have_alarm = true; + } + } + l++; + } + return have_alarm; +} + +static void pmbus_add_sensor_attrs_one(struct i2c_client *client, + struct pmbus_data *data, + const struct pmbus_driver_info *info, + const char *name, + int index, int page, + const struct pmbus_sensor_attr *attr) +{ + bool have_alarm; + int cbase = data->num_sensors; + + if (attr->label) + pmbus_add_label(data, name, index, attr->label, + attr->paged ? page + 1 : 0); + pmbus_add_sensor(data, name, "input", index, page, attr->reg, + attr->class, true, true); + if (attr->sfunc) { + have_alarm = pmbus_add_limit_attrs(client, data, info, name, + index, page, cbase, attr); + /* + * Add generic alarm attribute only if there are no individual + * alarm attributes, and if there is a global alarm bit. + */ + if (!have_alarm && attr->gbit) + pmbus_add_boolean_reg(data, name, "alarm", index, + PB_STATUS_BASE + page, + attr->gbit); + } +} + +static void pmbus_add_sensor_attrs(struct i2c_client *client, + struct pmbus_data *data, + const char *name, + const struct pmbus_sensor_attr *attrs, + int nattrs) +{ + const struct pmbus_driver_info *info = data->info; + int index, i; + + index = 1; + for (i = 0; i < nattrs; i++) { + int page, pages; + + pages = attrs->paged ? info->pages : 1; + for (page = 0; page < pages; page++) { + if (!(info->func[page] & attrs->func)) + continue; + pmbus_add_sensor_attrs_one(client, data, info, name, + index, page, attrs); + index++; + } + attrs++; + } +} + +static const struct pmbus_limit_attr vin_limit_attrs[] = { + { + .reg = PMBUS_VIN_UV_WARN_LIMIT, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_VOLTAGE_UV_WARNING, + }, { + .reg = PMBUS_VIN_UV_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_VOLTAGE_UV_FAULT, + }, { + .reg = PMBUS_VIN_OV_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_VOLTAGE_OV_WARNING, + }, { + .reg = PMBUS_VIN_OV_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_VOLTAGE_OV_FAULT, + }, +}; + +static const struct pmbus_limit_attr vout_limit_attrs[] = { + { + .reg = PMBUS_VOUT_UV_WARN_LIMIT, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_VOLTAGE_UV_WARNING, + }, { + .reg = PMBUS_VOUT_UV_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_VOLTAGE_UV_FAULT, + }, { + .reg = PMBUS_VOUT_OV_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_VOLTAGE_OV_WARNING, + }, { + .reg = PMBUS_VOUT_OV_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_VOLTAGE_OV_FAULT, + } +}; + +static const struct pmbus_sensor_attr voltage_attributes[] = { + { + .reg = PMBUS_READ_VIN, + .class = PSC_VOLTAGE_IN, + .label = "vin", + .func = PMBUS_HAVE_VIN, + .sfunc = PMBUS_HAVE_STATUS_INPUT, + .sbase = PB_STATUS_INPUT_BASE, + .gbit = PB_STATUS_VIN_UV, + .limit = vin_limit_attrs, + .nlimit = ARRAY_SIZE(vin_limit_attrs), + }, { + .reg = PMBUS_READ_VCAP, + .class = PSC_VOLTAGE_IN, + .label = "vcap", + .func = PMBUS_HAVE_VCAP, + }, { + .reg = PMBUS_READ_VOUT, + .class = PSC_VOLTAGE_OUT, + .label = "vout", + .paged = true, + .func = PMBUS_HAVE_VOUT, + .sfunc = PMBUS_HAVE_STATUS_VOUT, + .sbase = PB_STATUS_VOUT_BASE, + .gbit = PB_STATUS_VOUT_OV, + .limit = vout_limit_attrs, + .nlimit = ARRAY_SIZE(vout_limit_attrs), + } +}; + +/* Current attributes */ + +static const struct pmbus_limit_attr iin_limit_attrs[] = { + { + .reg = PMBUS_IIN_OC_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_IIN_OC_WARNING, + }, { + .reg = PMBUS_IIN_OC_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_IIN_OC_FAULT, + } +}; + +static const struct pmbus_limit_attr iout_limit_attrs[] = { + { + .reg = PMBUS_IOUT_OC_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_IOUT_OC_WARNING, + }, { + .reg = PMBUS_IOUT_UC_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_IOUT_UC_FAULT, + }, { + .reg = PMBUS_IOUT_OC_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_IOUT_OC_FAULT, + } +}; + +static const struct pmbus_sensor_attr current_attributes[] = { + { + .reg = PMBUS_READ_IIN, + .class = PSC_CURRENT_IN, + .label = "iin", + .func = PMBUS_HAVE_IIN, + .sfunc = PMBUS_HAVE_STATUS_INPUT, + .sbase = PB_STATUS_INPUT_BASE, + .limit = iin_limit_attrs, + .nlimit = ARRAY_SIZE(iin_limit_attrs), + }, { + .reg = PMBUS_READ_IOUT, + .class = PSC_CURRENT_OUT, + .label = "iout", + .paged = true, + .func = PMBUS_HAVE_IOUT, + .sfunc = PMBUS_HAVE_STATUS_IOUT, + .sbase = PB_STATUS_IOUT_BASE, + .gbit = PB_STATUS_IOUT_OC, + .limit = iout_limit_attrs, + .nlimit = ARRAY_SIZE(iout_limit_attrs), + } +}; + +/* Power attributes */ + +static const struct pmbus_limit_attr pin_limit_attrs[] = { + { + .reg = PMBUS_PIN_OP_WARN_LIMIT, + .attr = "max", + .alarm = "alarm", + .sbit = PB_PIN_OP_WARNING, + } +}; + +static const struct pmbus_limit_attr pout_limit_attrs[] = { + { + .reg = PMBUS_POUT_MAX, + .attr = "cap", + .alarm = "cap_alarm", + .sbit = PB_POWER_LIMITING, + }, { + .reg = PMBUS_POUT_OP_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_POUT_OP_WARNING, + }, { + .reg = PMBUS_POUT_OP_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_POUT_OP_FAULT, + } +}; + +static const struct pmbus_sensor_attr power_attributes[] = { + { + .reg = PMBUS_READ_PIN, + .class = PSC_POWER, + .label = "pin", + .func = PMBUS_HAVE_PIN, + .sfunc = PMBUS_HAVE_STATUS_INPUT, + .sbase = PB_STATUS_INPUT_BASE, + .limit = pin_limit_attrs, + .nlimit = ARRAY_SIZE(pin_limit_attrs), + }, { + .reg = PMBUS_READ_POUT, + .class = PSC_POWER, + .label = "pout", + .paged = true, + .func = PMBUS_HAVE_POUT, + .sfunc = PMBUS_HAVE_STATUS_IOUT, + .sbase = PB_STATUS_IOUT_BASE, + .limit = pout_limit_attrs, + .nlimit = ARRAY_SIZE(pout_limit_attrs), + } +}; + +/* Temperature atributes */ + +static const struct pmbus_limit_attr temp_limit_attrs[] = { + { + .reg = PMBUS_UT_WARN_LIMIT, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_TEMP_UT_WARNING, + }, { + .reg = PMBUS_UT_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_TEMP_UT_FAULT, + }, { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + }, { + .reg = PMBUS_OT_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_TEMP_OT_FAULT, + } +}; + +static const struct pmbus_sensor_attr temp_attributes[] = { + { + .reg = PMBUS_READ_TEMPERATURE_1, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs, + .nlimit = ARRAY_SIZE(temp_limit_attrs), + }, { + .reg = PMBUS_READ_TEMPERATURE_2, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP2, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs, + .nlimit = ARRAY_SIZE(temp_limit_attrs), + }, { + .reg = PMBUS_READ_TEMPERATURE_3, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP3, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs, + .nlimit = ARRAY_SIZE(temp_limit_attrs), + } +}; + +static const int pmbus_fan_registers[] = { + PMBUS_READ_FAN_SPEED_1, + PMBUS_READ_FAN_SPEED_2, + PMBUS_READ_FAN_SPEED_3, + PMBUS_READ_FAN_SPEED_4 +}; + +static const int pmbus_fan_config_registers[] = { + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_34, + PMBUS_FAN_CONFIG_34 +}; + +static const int pmbus_fan_status_registers[] = { + PMBUS_STATUS_FAN_12, + PMBUS_STATUS_FAN_12, + PMBUS_STATUS_FAN_34, + PMBUS_STATUS_FAN_34 +}; + +static const u32 pmbus_fan_flags[] = { + PMBUS_HAVE_FAN12, + PMBUS_HAVE_FAN12, + PMBUS_HAVE_FAN34, + PMBUS_HAVE_FAN34 +}; + +static const u32 pmbus_fan_status_flags[] = { + PMBUS_HAVE_STATUS_FAN12, + PMBUS_HAVE_STATUS_FAN12, + PMBUS_HAVE_STATUS_FAN34, + PMBUS_HAVE_STATUS_FAN34 +}; + +/* Fans */ +static void pmbus_add_fan_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + const struct pmbus_driver_info *info = data->info; + int index = 1; + int page; + + for (page = 0; page < info->pages; page++) { + int f; + + for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) { + int regval; + + if (!(info->func[page] & pmbus_fan_flags[f])) + break; + + if (!pmbus_check_word_register(client, page, + pmbus_fan_registers[f])) + break; + + /* + * Skip fan if not installed. + * Each fan configuration register covers multiple fans, + * so we have to do some magic. + */ + regval = _pmbus_read_byte_data(client, page, + pmbus_fan_config_registers[f]); + if (regval < 0 || + (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4))))) + continue; + + pmbus_add_sensor(data, "fan", "input", index, page, + pmbus_fan_registers[f], PSC_FAN, true, + true); + + /* + * Each fan status register covers multiple fans, + * so we have to do some magic. + */ + if ((info->func[page] & pmbus_fan_status_flags[f]) && + pmbus_check_byte_register(client, + page, pmbus_fan_status_registers[f])) { + int base; + + if (f > 1) /* fan 3, 4 */ + base = PB_STATUS_FAN34_BASE + page; + else + base = PB_STATUS_FAN_BASE + page; + pmbus_add_boolean_reg(data, "fan", "alarm", + index, base, + PB_FAN_FAN1_WARNING >> (f & 1)); + pmbus_add_boolean_reg(data, "fan", "fault", + index, base, + PB_FAN_FAN1_FAULT >> (f & 1)); + } + index++; + } + } +} + +static void pmbus_find_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + /* Voltage sensors */ + pmbus_add_sensor_attrs(client, data, "in", voltage_attributes, + ARRAY_SIZE(voltage_attributes)); + + /* Current sensors */ + pmbus_add_sensor_attrs(client, data, "curr", current_attributes, + ARRAY_SIZE(current_attributes)); + + /* Power sensors */ + pmbus_add_sensor_attrs(client, data, "power", power_attributes, + ARRAY_SIZE(power_attributes)); + + /* Temperature sensors */ + pmbus_add_sensor_attrs(client, data, "temp", temp_attributes, + ARRAY_SIZE(temp_attributes)); + + /* Fans */ + pmbus_add_fan_attributes(client, data); +} + +/* + * Identify chip parameters. + * This function is called for all chips. + */ +static int pmbus_identify_common(struct i2c_client *client, + struct pmbus_data *data) +{ + int vout_mode = -1, exponent; + + if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) + vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); + if (vout_mode >= 0 && vout_mode != 0xff) { + /* + * Not all chips support the VOUT_MODE command, + * so a failure to read it is not an error. + */ + switch (vout_mode >> 5) { + case 0: /* linear mode */ + if (data->info->direct[PSC_VOLTAGE_OUT]) + return -ENODEV; + + exponent = vout_mode & 0x1f; + /* and sign-extend it */ + if (exponent & 0x10) + exponent |= ~0x1f; + data->exponent = exponent; + break; + case 2: /* direct mode */ + if (!data->info->direct[PSC_VOLTAGE_OUT]) + return -ENODEV; + break; + default: + return -ENODEV; + } + } + + /* Determine maximum number of sensors, booleans, and labels */ + pmbus_find_max_attr(client, data); + pmbus_clear_fault_page(client, 0); + return 0; +} + +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info) +{ + const struct pmbus_platform_data *pdata = client->dev.platform_data; + struct pmbus_data *data; + int ret; + + if (!info) { + dev_err(&client->dev, "Missing chip information"); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&client->dev, "No memory to allocate driver data\n"); + return -ENOMEM; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Bail out if PMBus status register does not exist. */ + if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0) { + dev_err(&client->dev, "PMBus status register not found\n"); + ret = -ENODEV; + goto out_data; + } + + if (pdata) + data->flags = pdata->flags; + data->info = info; + + pmbus_clear_faults(client); + + if (info->identify) { + ret = (*info->identify)(client, info); + if (ret < 0) { + dev_err(&client->dev, "Chip identification failed\n"); + goto out_data; + } + } + + if (info->pages <= 0 || info->pages > PMBUS_PAGES) { + dev_err(&client->dev, "Bad number of PMBus pages: %d\n", + info->pages); + ret = -EINVAL; + goto out_data; + } + /* + * Bail out if more than one page was configured, but we can not + * select the highest page. This is an indication that the wrong + * chip type was selected. Better bail out now than keep + * returning errors later on. + */ + if (info->pages > 1 && pmbus_set_page(client, info->pages - 1) < 0) { + dev_err(&client->dev, "Failed to select page %d\n", + info->pages - 1); + ret = -EINVAL; + goto out_data; + } + + ret = pmbus_identify_common(client, data); + if (ret < 0) { + dev_err(&client->dev, "Failed to identify chip capabilities\n"); + goto out_data; + } + + ret = -ENOMEM; + data->sensors = kzalloc(sizeof(struct pmbus_sensor) * data->max_sensors, + GFP_KERNEL); + if (!data->sensors) { + dev_err(&client->dev, "No memory to allocate sensor data\n"); + goto out_data; + } + + data->booleans = kzalloc(sizeof(struct pmbus_boolean) + * data->max_booleans, GFP_KERNEL); + if (!data->booleans) { + dev_err(&client->dev, "No memory to allocate boolean data\n"); + goto out_sensors; + } + + data->labels = kzalloc(sizeof(struct pmbus_label) * data->max_labels, + GFP_KERNEL); + if (!data->labels) { + dev_err(&client->dev, "No memory to allocate label data\n"); + goto out_booleans; + } + + data->attributes = kzalloc(sizeof(struct attribute *) + * data->max_attributes, GFP_KERNEL); + if (!data->attributes) { + dev_err(&client->dev, "No memory to allocate attribute data\n"); + goto out_labels; + } + + pmbus_find_attributes(client, data); + + /* + * If there are no attributes, something is wrong. + * Bail out instead of trying to register nothing. + */ + if (!data->num_attributes) { + dev_err(&client->dev, "No attributes found\n"); + ret = -ENODEV; + goto out_attributes; + } + + /* Register sysfs hooks */ + data->group.attrs = data->attributes; + ret = sysfs_create_group(&client->dev.kobj, &data->group); + if (ret) { + dev_err(&client->dev, "Failed to create sysfs entries\n"); + goto out_attributes; + } + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + dev_err(&client->dev, "Failed to register hwmon device\n"); + goto out_hwmon_device_register; + } + return 0; + +out_hwmon_device_register: + sysfs_remove_group(&client->dev.kobj, &data->group); +out_attributes: + kfree(data->attributes); +out_labels: + kfree(data->labels); +out_booleans: + kfree(data->booleans); +out_sensors: + kfree(data->sensors); +out_data: + kfree(data); + return ret; +} +EXPORT_SYMBOL_GPL(pmbus_do_probe); + +int pmbus_do_remove(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->group); + kfree(data->attributes); + kfree(data->labels); + kfree(data->booleans); + kfree(data->sensors); + kfree(data); + return 0; +} +EXPORT_SYMBOL_GPL(pmbus_do_remove); + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus core driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c new file mode 100644 index 0000000..ace1c73 --- /dev/null +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -0,0 +1,278 @@ +/* + * Hardware monitoring driver for UCD90xxx Sequencer and System Health + * Controller series + * + * Copyright (C) 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c/pmbus.h> +#include "pmbus.h" + +enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 }; + +#define UCD9000_MONITOR_CONFIG 0xd5 +#define UCD9000_NUM_PAGES 0xd6 +#define UCD9000_FAN_CONFIG_INDEX 0xe7 +#define UCD9000_FAN_CONFIG 0xe8 +#define UCD9000_DEVICE_ID 0xfd + +#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07) +#define UCD9000_MON_PAGE(x) ((x) & 0x0f) + +#define UCD9000_MON_VOLTAGE 1 +#define UCD9000_MON_TEMPERATURE 2 +#define UCD9000_MON_CURRENT 3 +#define UCD9000_MON_VOLTAGE_HW 4 + +#define UCD9000_NUM_FAN 4 + +struct ucd9000_data { + u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; + struct pmbus_driver_info info; +}; +#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) + +static int ucd9000_get_fan_config(struct i2c_client *client, int fan) +{ + int fan_config = 0; + struct ucd9000_data *data + = to_ucd9000_data(pmbus_get_driver_info(client)); + + if (data->fan_data[fan][3] & 1) + fan_config |= PB_FAN_2_INSTALLED; /* Use lower bit position */ + + /* Pulses/revolution */ + fan_config |= (data->fan_data[fan][3] & 0x06) >> 1; + + return fan_config; +} + +static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret = 0; + int fan_config; + + switch (reg) { + case PMBUS_FAN_CONFIG_12: + if (page) + return -EINVAL; + + ret = ucd9000_get_fan_config(client, 0); + if (ret < 0) + return ret; + fan_config = ret << 4; + ret = ucd9000_get_fan_config(client, 1); + if (ret < 0) + return ret; + fan_config |= ret; + ret = fan_config; + break; + case PMBUS_FAN_CONFIG_34: + if (page) + return -EINVAL; + + ret = ucd9000_get_fan_config(client, 2); + if (ret < 0) + return ret; + fan_config = ret << 4; + ret = ucd9000_get_fan_config(client, 3); + if (ret < 0) + return ret; + fan_config |= ret; + ret = fan_config; + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + +static const struct i2c_device_id ucd9000_id[] = { + {"ucd9000", ucd9000}, + {"ucd90120", ucd90120}, + {"ucd90124", ucd90124}, + {"ucd9090", ucd9090}, + {"ucd90910", ucd90910}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ucd9000_id); + +static int ucd9000_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; + struct ucd9000_data *data; + struct pmbus_driver_info *info; + const struct i2c_device_id *mid; + int i, ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID, + block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read device ID\n"); + return ret; + } + block_buffer[ret] = '\0'; + dev_info(&client->dev, "Device ID %s\n", block_buffer); + + mid = NULL; + for (i = 0; i < ARRAY_SIZE(ucd9000_id); i++) { + mid = &ucd9000_id[i]; + if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) + break; + } + if (!mid || !strlen(mid->name)) { + dev_err(&client->dev, "Unsupported device\n"); + return -ENODEV; + } + + if (id->driver_data != ucd9000 && id->driver_data != mid->driver_data) + dev_notice(&client->dev, + "Device mismatch: Configured %s, detected %s\n", + id->name, mid->name); + + data = kzalloc(sizeof(struct ucd9000_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + info = &data->info; + + ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES); + if (ret < 0) { + dev_err(&client->dev, + "Failed to read number of active pages\n"); + goto out; + } + info->pages = ret; + if (!info->pages) { + dev_err(&client->dev, "No pages configured\n"); + ret = -ENODEV; + goto out; + } + + /* The internal temperature sensor is always active */ + info->func[0] = PMBUS_HAVE_TEMP; + + /* Everything else is configurable */ + ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG, + block_buffer); + if (ret <= 0) { + dev_err(&client->dev, "Failed to read configuration data\n"); + ret = -ENODEV; + goto out; + } + for (i = 0; i < ret; i++) { + int page = UCD9000_MON_PAGE(block_buffer[i]); + + if (page >= info->pages) + continue; + + switch (UCD9000_MON_TYPE(block_buffer[i])) { + case UCD9000_MON_VOLTAGE: + case UCD9000_MON_VOLTAGE_HW: + info->func[page] |= PMBUS_HAVE_VOUT + | PMBUS_HAVE_STATUS_VOUT; + break; + case UCD9000_MON_TEMPERATURE: + info->func[page] |= PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_STATUS_TEMP; + break; + case UCD9000_MON_CURRENT: + info->func[page] |= PMBUS_HAVE_IOUT + | PMBUS_HAVE_STATUS_IOUT; + break; + default: + break; + } + } + + /* Fan configuration */ + if (mid->driver_data == ucd90124) { + for (i = 0; i < UCD9000_NUM_FAN; i++) { + i2c_smbus_write_byte_data(client, + UCD9000_FAN_CONFIG_INDEX, i); + ret = i2c_smbus_read_block_data(client, + UCD9000_FAN_CONFIG, + data->fan_data[i]); + if (ret < 0) + goto out; + } + i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0); + + info->read_byte_data = ucd9000_read_byte_data; + info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 + | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34; + } + + ret = pmbus_do_probe(client, mid, info); + if (ret < 0) + goto out; + return 0; + +out: + kfree(data); + return ret; +} + +static int ucd9000_remove(struct i2c_client *client) +{ + int ret; + struct ucd9000_data *data; + + data = to_ucd9000_data(pmbus_get_driver_info(client)); + ret = pmbus_do_remove(client); + kfree(data); + return ret; +} + + +/* This is the driver that will be inserted */ +static struct i2c_driver ucd9000_driver = { + .driver = { + .name = "ucd9000", + }, + .probe = ucd9000_probe, + .remove = ucd9000_remove, + .id_table = ucd9000_id, +}; + +static int __init ucd9000_init(void) +{ + return i2c_add_driver(&ucd9000_driver); +} + +static void __exit ucd9000_exit(void) +{ + i2c_del_driver(&ucd9000_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx"); +MODULE_LICENSE("GPL"); +module_init(ucd9000_init); +module_exit(ucd9000_exit); diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c new file mode 100644 index 0000000..ffcc1cf --- /dev/null +++ b/drivers/hwmon/pmbus/ucd9200.c @@ -0,0 +1,210 @@ +/* + * Hardware monitoring driver for ucd9200 series Digital PWM System Controllers + * + * Copyright (C) 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/i2c/pmbus.h> +#include "pmbus.h" + +#define UCD9200_PHASE_INFO 0xd2 +#define UCD9200_DEVICE_ID 0xfd + +enum chips { ucd9200, ucd9220, ucd9222, ucd9224, ucd9240, ucd9244, ucd9246, + ucd9248 }; + +static const struct i2c_device_id ucd9200_id[] = { + {"ucd9200", ucd9200}, + {"ucd9220", ucd9220}, + {"ucd9222", ucd9222}, + {"ucd9224", ucd9224}, + {"ucd9240", ucd9240}, + {"ucd9244", ucd9244}, + {"ucd9246", ucd9246}, + {"ucd9248", ucd9248}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ucd9200_id); + +static int ucd9200_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; + struct pmbus_driver_info *info; + const struct i2c_device_id *mid; + int i, j, ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, UCD9200_DEVICE_ID, + block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read device ID\n"); + return ret; + } + block_buffer[ret] = '\0'; + dev_info(&client->dev, "Device ID %s\n", block_buffer); + + mid = NULL; + for (i = 0; i < ARRAY_SIZE(ucd9200_id); i++) { + mid = &ucd9200_id[i]; + if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) + break; + } + if (!mid || !strlen(mid->name)) { + dev_err(&client->dev, "Unsupported device\n"); + return -ENODEV; + } + if (id->driver_data != ucd9200 && id->driver_data != mid->driver_data) + dev_notice(&client->dev, + "Device mismatch: Configured %s, detected %s\n", + id->name, mid->name); + + info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ret = i2c_smbus_read_block_data(client, UCD9200_PHASE_INFO, + block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read phase information\n"); + goto out; + } + + /* + * Calculate number of configured pages (rails) from PHASE_INFO + * register. + * Rails have to be sequential, so we can abort after finding + * the first unconfigured rail. + */ + info->pages = 0; + for (i = 0; i < ret; i++) { + if (!block_buffer[i]) + break; + info->pages++; + } + if (!info->pages) { + dev_err(&client->dev, "No rails configured\n"); + ret = -ENODEV; + goto out; + } + dev_info(&client->dev, "%d rails configured\n", info->pages); + + /* + * Set PHASE registers on all pages to 0xff to ensure that phase + * specific commands will apply to all phases of a given page (rail). + * This only affects the READ_IOUT and READ_TEMPERATURE2 registers. + * READ_IOUT will return the sum of currents of all phases of a rail, + * and READ_TEMPERATURE2 will return the maximum temperature detected + * for the the phases of the rail. + */ + for (i = 0; i < info->pages; i++) { + /* + * Setting PAGE & PHASE fails once in a while for no obvious + * reason, so we need to retry a couple of times. + */ + for (j = 0; j < 3; j++) { + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i); + if (ret < 0) + continue; + ret = i2c_smbus_write_byte_data(client, PMBUS_PHASE, + 0xff); + if (ret < 0) + continue; + break; + } + if (ret < 0) { + dev_err(&client->dev, + "Failed to initialize PHASE registers\n"); + goto out; + } + } + if (info->pages > 1) + i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); + + info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | + PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; + + for (i = 1; i < info->pages; i++) + info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_POUT | + PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; + + /* ucd9240 supports a single fan */ + if (mid->driver_data == ucd9240) + info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12; + + ret = pmbus_do_probe(client, mid, info); + if (ret < 0) + goto out; + return 0; +out: + kfree(info); + return ret; +} + +static int ucd9200_remove(struct i2c_client *client) +{ + int ret; + const struct pmbus_driver_info *info; + + info = pmbus_get_driver_info(client); + ret = pmbus_do_remove(client); + kfree(info); + return ret; +} + + +/* This is the driver that will be inserted */ +static struct i2c_driver ucd9200_driver = { + .driver = { + .name = "ucd9200", + }, + .probe = ucd9200_probe, + .remove = ucd9200_remove, + .id_table = ucd9200_id, +}; + +static int __init ucd9200_init(void) +{ + return i2c_add_driver(&ucd9200_driver); +} + +static void __exit ucd9200_exit(void) +{ + i2c_del_driver(&ucd9200_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus driver for TI UCD922x, UCD924x"); +MODULE_LICENSE("GPL"); +module_init(ucd9200_init); +module_exit(ucd9200_exit); diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c deleted file mode 100644 index 8e31a8e..0000000 --- a/drivers/hwmon/pmbus_core.c +++ /dev/null @@ -1,1567 +0,0 @@ -/* - * Hardware monitoring driver for PMBus devices - * - * Copyright (c) 2010, 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -#include <linux/delay.h> -#include <linux/i2c/pmbus.h> -#include "pmbus.h" - -/* - * Constants needed to determine number of sensors, booleans, and labels. - */ -#define PMBUS_MAX_INPUT_SENSORS 11 /* 6*volt, 3*curr, 2*power */ -#define PMBUS_VOUT_SENSORS_PER_PAGE 5 /* input, min, max, lcrit, - crit */ -#define PMBUS_IOUT_SENSORS_PER_PAGE 4 /* input, min, max, crit */ -#define PMBUS_POUT_SENSORS_PER_PAGE 4 /* input, cap, max, crit */ -#define PMBUS_MAX_SENSORS_PER_FAN 1 /* input */ -#define PMBUS_MAX_SENSORS_PER_TEMP 5 /* input, min, max, lcrit, - crit */ - -#define PMBUS_MAX_INPUT_BOOLEANS 7 /* v: min_alarm, max_alarm, - lcrit_alarm, crit_alarm; - c: alarm, crit_alarm; - p: crit_alarm */ -#define PMBUS_VOUT_BOOLEANS_PER_PAGE 4 /* min_alarm, max_alarm, - lcrit_alarm, crit_alarm */ -#define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm, - crit_alarm */ -#define PMBUS_POUT_BOOLEANS_PER_PAGE 2 /* alarm, crit_alarm */ -#define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */ -#define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm, - lcrit_alarm, crit_alarm */ - -#define PMBUS_MAX_INPUT_LABELS 4 /* vin, vcap, iin, pin */ - -/* - * status, status_vout, status_iout, status_fans, status_fan34, and status_temp - * are paged. status_input is unpaged. - */ -#define PB_NUM_STATUS_REG (PMBUS_PAGES * 6 + 1) - -/* - * Index into status register array, per status register group - */ -#define PB_STATUS_BASE 0 -#define PB_STATUS_VOUT_BASE (PB_STATUS_BASE + PMBUS_PAGES) -#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES) -#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES) -#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES) -#define PB_STATUS_INPUT_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES) -#define PB_STATUS_TEMP_BASE (PB_STATUS_INPUT_BASE + 1) - -struct pmbus_sensor { - char name[I2C_NAME_SIZE]; /* sysfs sensor name */ - struct sensor_device_attribute attribute; - u8 page; /* page number */ - u8 reg; /* register */ - enum pmbus_sensor_classes class; /* sensor class */ - bool update; /* runtime sensor update needed */ - int data; /* Sensor data. - Negative if there was a read error */ -}; - -struct pmbus_boolean { - char name[I2C_NAME_SIZE]; /* sysfs boolean name */ - struct sensor_device_attribute attribute; -}; - -struct pmbus_label { - char name[I2C_NAME_SIZE]; /* sysfs label name */ - struct sensor_device_attribute attribute; - char label[I2C_NAME_SIZE]; /* label */ -}; - -struct pmbus_data { - struct device *hwmon_dev; - - u32 flags; /* from platform data */ - - int exponent; /* linear mode: exponent for output voltages */ - - const struct pmbus_driver_info *info; - - int max_attributes; - int num_attributes; - struct attribute **attributes; - struct attribute_group group; - - /* - * Sensors cover both sensor and limit registers. - */ - int max_sensors; - int num_sensors; - struct pmbus_sensor *sensors; - /* - * Booleans are used for alarms. - * Values are determined from status registers. - */ - int max_booleans; - int num_booleans; - struct pmbus_boolean *booleans; - /* - * Labels are used to map generic names (e.g., "in1") - * to PMBus specific names (e.g., "vin" or "vout1"). - */ - int max_labels; - int num_labels; - struct pmbus_label *labels; - - struct mutex update_lock; - bool valid; - unsigned long last_updated; /* in jiffies */ - - /* - * A single status register covers multiple attributes, - * so we keep them all together. - */ - u8 status[PB_NUM_STATUS_REG]; - - u8 currpage; -}; - -int pmbus_set_page(struct i2c_client *client, u8 page) -{ - struct pmbus_data *data = i2c_get_clientdata(client); - int rv = 0; - int newpage; - - if (page != data->currpage) { - rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); - newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE); - if (newpage != page) - rv = -EINVAL; - else - data->currpage = page; - } - return rv; -} -EXPORT_SYMBOL_GPL(pmbus_set_page); - -static int pmbus_write_byte(struct i2c_client *client, u8 page, u8 value) -{ - int rv; - - rv = pmbus_set_page(client, page); - if (rv < 0) - return rv; - - return i2c_smbus_write_byte(client, value); -} - -static int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, - u16 word) -{ - int rv; - - rv = pmbus_set_page(client, page); - if (rv < 0) - return rv; - - return i2c_smbus_write_word_data(client, reg, word); -} - -int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg) -{ - int rv; - - rv = pmbus_set_page(client, page); - if (rv < 0) - return rv; - - return i2c_smbus_read_word_data(client, reg); -} -EXPORT_SYMBOL_GPL(pmbus_read_word_data); - -static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg) -{ - int rv; - - rv = pmbus_set_page(client, page); - if (rv < 0) - return rv; - - return i2c_smbus_read_byte_data(client, reg); -} - -static void pmbus_clear_fault_page(struct i2c_client *client, int page) -{ - pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); -} - -void pmbus_clear_faults(struct i2c_client *client) -{ - struct pmbus_data *data = i2c_get_clientdata(client); - int i; - - for (i = 0; i < data->info->pages; i++) - pmbus_clear_fault_page(client, i); -} -EXPORT_SYMBOL_GPL(pmbus_clear_faults); - -static int pmbus_check_status_cml(struct i2c_client *client, int page) -{ - int status, status2; - - status = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE); - if (status < 0 || (status & PB_STATUS_CML)) { - status2 = pmbus_read_byte_data(client, page, PMBUS_STATUS_CML); - if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) - return -EINVAL; - } - return 0; -} - -bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg) -{ - int rv; - struct pmbus_data *data = i2c_get_clientdata(client); - - rv = pmbus_read_byte_data(client, page, reg); - if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK)) - rv = pmbus_check_status_cml(client, page); - pmbus_clear_fault_page(client, page); - return rv >= 0; -} -EXPORT_SYMBOL_GPL(pmbus_check_byte_register); - -bool pmbus_check_word_register(struct i2c_client *client, int page, int reg) -{ - int rv; - struct pmbus_data *data = i2c_get_clientdata(client); - - rv = pmbus_read_word_data(client, page, reg); - if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK)) - rv = pmbus_check_status_cml(client, page); - pmbus_clear_fault_page(client, page); - return rv >= 0; -} -EXPORT_SYMBOL_GPL(pmbus_check_word_register); - -const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client) -{ - struct pmbus_data *data = i2c_get_clientdata(client); - - return data->info; -} -EXPORT_SYMBOL_GPL(pmbus_get_driver_info); - -/* - * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if - * a device specific mapping funcion exists and calls it if necessary. - */ -static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg) -{ - struct pmbus_data *data = i2c_get_clientdata(client); - const struct pmbus_driver_info *info = data->info; - int status; - - if (info->read_byte_data) { - status = info->read_byte_data(client, page, reg); - if (status != -ENODATA) - return status; - } - return pmbus_read_byte_data(client, page, reg); -} - -static struct pmbus_data *pmbus_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pmbus_data *data = i2c_get_clientdata(client); - const struct pmbus_driver_info *info = data->info; - - mutex_lock(&data->update_lock); - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - int i; - - for (i = 0; i < info->pages; i++) - data->status[PB_STATUS_BASE + i] - = pmbus_read_byte_data(client, i, - PMBUS_STATUS_BYTE); - for (i = 0; i < info->pages; i++) { - if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT)) - continue; - data->status[PB_STATUS_VOUT_BASE + i] - = _pmbus_read_byte_data(client, i, PMBUS_STATUS_VOUT); - } - for (i = 0; i < info->pages; i++) { - if (!(info->func[i] & PMBUS_HAVE_STATUS_IOUT)) - continue; - data->status[PB_STATUS_IOUT_BASE + i] - = _pmbus_read_byte_data(client, i, PMBUS_STATUS_IOUT); - } - for (i = 0; i < info->pages; i++) { - if (!(info->func[i] & PMBUS_HAVE_STATUS_TEMP)) - continue; - data->status[PB_STATUS_TEMP_BASE + i] - = _pmbus_read_byte_data(client, i, - PMBUS_STATUS_TEMPERATURE); - } - for (i = 0; i < info->pages; i++) { - if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN12)) - continue; - data->status[PB_STATUS_FAN_BASE + i] - = _pmbus_read_byte_data(client, i, - PMBUS_STATUS_FAN_12); - } - - for (i = 0; i < info->pages; i++) { - if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN34)) - continue; - data->status[PB_STATUS_FAN34_BASE + i] - = _pmbus_read_byte_data(client, i, - PMBUS_STATUS_FAN_34); - } - - if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) - data->status[PB_STATUS_INPUT_BASE] - = _pmbus_read_byte_data(client, 0, - PMBUS_STATUS_INPUT); - - for (i = 0; i < data->num_sensors; i++) { - struct pmbus_sensor *sensor = &data->sensors[i]; - - if (!data->valid || sensor->update) - sensor->data - = pmbus_read_word_data(client, sensor->page, - sensor->reg); - } - pmbus_clear_faults(client); - data->last_updated = jiffies; - data->valid = 1; - } - mutex_unlock(&data->update_lock); - return data; -} - -/* - * Convert linear sensor values to milli- or micro-units - * depending on sensor type. - */ -static long pmbus_reg2data_linear(struct pmbus_data *data, - struct pmbus_sensor *sensor) -{ - s16 exponent; - s32 mantissa; - long val; - - if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */ - exponent = data->exponent; - mantissa = (u16) sensor->data; - } else { /* LINEAR11 */ - exponent = (sensor->data >> 11) & 0x001f; - mantissa = sensor->data & 0x07ff; - - if (exponent > 0x0f) - exponent |= 0xffe0; /* sign extend exponent */ - if (mantissa > 0x03ff) - mantissa |= 0xfffff800; /* sign extend mantissa */ - } - - val = mantissa; - - /* scale result to milli-units for all sensors except fans */ - if (sensor->class != PSC_FAN) - val = val * 1000L; - - /* scale result to micro-units for power sensors */ - if (sensor->class == PSC_POWER) - val = val * 1000L; - - if (exponent >= 0) - val <<= exponent; - else - val >>= -exponent; - - return val; -} - -/* - * Convert direct sensor values to milli- or micro-units - * depending on sensor type. - */ -static long pmbus_reg2data_direct(struct pmbus_data *data, - struct pmbus_sensor *sensor) -{ - long val = (s16) sensor->data; - long m, b, R; - - m = data->info->m[sensor->class]; - b = data->info->b[sensor->class]; - R = data->info->R[sensor->class]; - - if (m == 0) - return 0; - - /* X = 1/m * (Y * 10^-R - b) */ - R = -R; - /* scale result to milli-units for everything but fans */ - if (sensor->class != PSC_FAN) { - R += 3; - b *= 1000; - } - - /* scale result to micro-units for power sensors */ - if (sensor->class == PSC_POWER) { - R += 3; - b *= 1000; - } - - while (R > 0) { - val *= 10; - R--; - } - while (R < 0) { - val = DIV_ROUND_CLOSEST(val, 10); - R++; - } - - return (val - b) / m; -} - -static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) -{ - long val; - - if (data->info->direct[sensor->class]) - val = pmbus_reg2data_direct(data, sensor); - else - val = pmbus_reg2data_linear(data, sensor); - - return val; -} - -#define MAX_MANTISSA (1023 * 1000) -#define MIN_MANTISSA (511 * 1000) - -static u16 pmbus_data2reg_linear(struct pmbus_data *data, - enum pmbus_sensor_classes class, long val) -{ - s16 exponent = 0, mantissa; - bool negative = false; - - /* simple case */ - if (val == 0) - return 0; - - if (class == PSC_VOLTAGE_OUT) { - /* LINEAR16 does not support negative voltages */ - if (val < 0) - return 0; - - /* - * For a static exponents, we don't have a choice - * but to adjust the value to it. - */ - if (data->exponent < 0) - val <<= -data->exponent; - else - val >>= data->exponent; - val = DIV_ROUND_CLOSEST(val, 1000); - return val & 0xffff; - } - - if (val < 0) { - negative = true; - val = -val; - } - - /* Power is in uW. Convert to mW before converting. */ - if (class == PSC_POWER) - val = DIV_ROUND_CLOSEST(val, 1000L); - - /* - * For simplicity, convert fan data to milli-units - * before calculating the exponent. - */ - if (class == PSC_FAN) - val = val * 1000; - - /* Reduce large mantissa until it fits into 10 bit */ - while (val >= MAX_MANTISSA && exponent < 15) { - exponent++; - val >>= 1; - } - /* Increase small mantissa to improve precision */ - while (val < MIN_MANTISSA && exponent > -15) { - exponent--; - val <<= 1; - } - - /* Convert mantissa from milli-units to units */ - mantissa = DIV_ROUND_CLOSEST(val, 1000); - - /* Ensure that resulting number is within range */ - if (mantissa > 0x3ff) - mantissa = 0x3ff; - - /* restore sign */ - if (negative) - mantissa = -mantissa; - - /* Convert to 5 bit exponent, 11 bit mantissa */ - return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); -} - -static u16 pmbus_data2reg_direct(struct pmbus_data *data, - enum pmbus_sensor_classes class, long val) -{ - long m, b, R; - - m = data->info->m[class]; - b = data->info->b[class]; - R = data->info->R[class]; - - /* Power is in uW. Adjust R and b. */ - if (class == PSC_POWER) { - R -= 3; - b *= 1000; - } - - /* Calculate Y = (m * X + b) * 10^R */ - if (class != PSC_FAN) { - R -= 3; /* Adjust R and b for data in milli-units */ - b *= 1000; - } - val = val * m + b; - - while (R > 0) { - val *= 10; - R--; - } - while (R < 0) { - val = DIV_ROUND_CLOSEST(val, 10); - R++; - } - - return val; -} - -static u16 pmbus_data2reg(struct pmbus_data *data, - enum pmbus_sensor_classes class, long val) -{ - u16 regval; - - if (data->info->direct[class]) - regval = pmbus_data2reg_direct(data, class, val); - else - regval = pmbus_data2reg_linear(data, class, val); - - return regval; -} - -/* - * Return boolean calculated from converted data. - * <index> defines a status register index and mask, and optionally - * two sensor indexes. - * The upper half-word references the two sensors, - * two sensor indices. - * The upper half-word references the two optional sensors, - * the lower half word references status register and mask. - * The function returns true if (status[reg] & mask) is true and, - * if specified, if v1 >= v2. - * To determine if an object exceeds upper limits, specify <v, limit>. - * To determine if an object exceeds lower limits, specify <limit, v>. - * - * For booleans created with pmbus_add_boolean_reg(), only the lower 16 bits of - * index are set. s1 and s2 (the sensor index values) are zero in this case. - * The function returns true if (status[reg] & mask) is true. - * - * If the boolean was created with pmbus_add_boolean_cmp(), a comparison against - * a specified limit has to be performed to determine the boolean result. - * In this case, the function returns true if v1 >= v2 (where v1 and v2 are - * sensor values referenced by sensor indices s1 and s2). - * - * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>. - * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>. - * - * If a negative value is stored in any of the referenced registers, this value - * reflects an error code which will be returned. - */ -static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) -{ - u8 s1 = (index >> 24) & 0xff; - u8 s2 = (index >> 16) & 0xff; - u8 reg = (index >> 8) & 0xff; - u8 mask = index & 0xff; - int status; - u8 regval; - - status = data->status[reg]; - if (status < 0) - return status; - - regval = status & mask; - if (!s1 && !s2) - *val = !!regval; - else { - long v1, v2; - struct pmbus_sensor *sensor1, *sensor2; - - sensor1 = &data->sensors[s1]; - if (sensor1->data < 0) - return sensor1->data; - sensor2 = &data->sensors[s2]; - if (sensor2->data < 0) - return sensor2->data; - - v1 = pmbus_reg2data(data, sensor1); - v2 = pmbus_reg2data(data, sensor2); - *val = !!(regval && v1 >= v2); - } - return 0; -} - -static ssize_t pmbus_show_boolean(struct device *dev, - struct device_attribute *da, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct pmbus_data *data = pmbus_update_device(dev); - int val; - int err; - - err = pmbus_get_boolean(data, attr->index, &val); - if (err) - return err; - return snprintf(buf, PAGE_SIZE, "%d\n", val); -} - -static ssize_t pmbus_show_sensor(struct device *dev, - struct device_attribute *da, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct pmbus_data *data = pmbus_update_device(dev); - struct pmbus_sensor *sensor; - - sensor = &data->sensors[attr->index]; - if (sensor->data < 0) - return sensor->data; - - return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor)); -} - -static ssize_t pmbus_set_sensor(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct pmbus_data *data = i2c_get_clientdata(client); - struct pmbus_sensor *sensor = &data->sensors[attr->index]; - ssize_t rv = count; - long val = 0; - int ret; - u16 regval; - - if (strict_strtol(buf, 10, &val) < 0) - return -EINVAL; - - mutex_lock(&data->update_lock); - regval = pmbus_data2reg(data, sensor->class, val); - ret = pmbus_write_word_data(client, sensor->page, sensor->reg, regval); - if (ret < 0) - rv = ret; - else - data->sensors[attr->index].data = regval; - mutex_unlock(&data->update_lock); - return rv; -} - -static ssize_t pmbus_show_label(struct device *dev, - struct device_attribute *da, char *buf) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pmbus_data *data = i2c_get_clientdata(client); - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - - return snprintf(buf, PAGE_SIZE, "%s\n", - data->labels[attr->index].label); -} - -#define PMBUS_ADD_ATTR(data, _name, _idx, _mode, _type, _show, _set) \ -do { \ - struct sensor_device_attribute *a \ - = &data->_type##s[data->num_##_type##s].attribute; \ - BUG_ON(data->num_attributes >= data->max_attributes); \ - sysfs_attr_init(&a->dev_attr.attr); \ - a->dev_attr.attr.name = _name; \ - a->dev_attr.attr.mode = _mode; \ - a->dev_attr.show = _show; \ - a->dev_attr.store = _set; \ - a->index = _idx; \ - data->attributes[data->num_attributes] = &a->dev_attr.attr; \ - data->num_attributes++; \ -} while (0) - -#define PMBUS_ADD_GET_ATTR(data, _name, _type, _idx) \ - PMBUS_ADD_ATTR(data, _name, _idx, S_IRUGO, _type, \ - pmbus_show_##_type, NULL) - -#define PMBUS_ADD_SET_ATTR(data, _name, _type, _idx) \ - PMBUS_ADD_ATTR(data, _name, _idx, S_IWUSR | S_IRUGO, _type, \ - pmbus_show_##_type, pmbus_set_##_type) - -static void pmbus_add_boolean(struct pmbus_data *data, - const char *name, const char *type, int seq, - int idx) -{ - struct pmbus_boolean *boolean; - - BUG_ON(data->num_booleans >= data->max_booleans); - - boolean = &data->booleans[data->num_booleans]; - - snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s", - name, seq, type); - PMBUS_ADD_GET_ATTR(data, boolean->name, boolean, idx); - data->num_booleans++; -} - -static void pmbus_add_boolean_reg(struct pmbus_data *data, - const char *name, const char *type, - int seq, int reg, int bit) -{ - pmbus_add_boolean(data, name, type, seq, (reg << 8) | bit); -} - -static void pmbus_add_boolean_cmp(struct pmbus_data *data, - const char *name, const char *type, - int seq, int i1, int i2, int reg, int mask) -{ - pmbus_add_boolean(data, name, type, seq, - (i1 << 24) | (i2 << 16) | (reg << 8) | mask); -} - -static void pmbus_add_sensor(struct pmbus_data *data, - const char *name, const char *type, int seq, - int page, int reg, enum pmbus_sensor_classes class, - bool update, bool readonly) -{ - struct pmbus_sensor *sensor; - - BUG_ON(data->num_sensors >= data->max_sensors); - - sensor = &data->sensors[data->num_sensors]; - snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s", - name, seq, type); - sensor->page = page; - sensor->reg = reg; - sensor->class = class; - sensor->update = update; - if (readonly) - PMBUS_ADD_GET_ATTR(data, sensor->name, sensor, - data->num_sensors); - else - PMBUS_ADD_SET_ATTR(data, sensor->name, sensor, - data->num_sensors); - data->num_sensors++; -} - -static void pmbus_add_label(struct pmbus_data *data, - const char *name, int seq, - const char *lstring, int index) -{ - struct pmbus_label *label; - - BUG_ON(data->num_labels >= data->max_labels); - - label = &data->labels[data->num_labels]; - snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq); - if (!index) - strncpy(label->label, lstring, sizeof(label->label) - 1); - else - snprintf(label->label, sizeof(label->label), "%s%d", lstring, - index); - - PMBUS_ADD_GET_ATTR(data, label->name, label, data->num_labels); - data->num_labels++; -} - -/* - * Determine maximum number of sensors, booleans, and labels. - * To keep things simple, only make a rough high estimate. - */ -static void pmbus_find_max_attr(struct i2c_client *client, - struct pmbus_data *data) -{ - const struct pmbus_driver_info *info = data->info; - int page, max_sensors, max_booleans, max_labels; - - max_sensors = PMBUS_MAX_INPUT_SENSORS; - max_booleans = PMBUS_MAX_INPUT_BOOLEANS; - max_labels = PMBUS_MAX_INPUT_LABELS; - - for (page = 0; page < info->pages; page++) { - if (info->func[page] & PMBUS_HAVE_VOUT) { - max_sensors += PMBUS_VOUT_SENSORS_PER_PAGE; - max_booleans += PMBUS_VOUT_BOOLEANS_PER_PAGE; - max_labels++; - } - if (info->func[page] & PMBUS_HAVE_IOUT) { - max_sensors += PMBUS_IOUT_SENSORS_PER_PAGE; - max_booleans += PMBUS_IOUT_BOOLEANS_PER_PAGE; - max_labels++; - } - if (info->func[page] & PMBUS_HAVE_POUT) { - max_sensors += PMBUS_POUT_SENSORS_PER_PAGE; - max_booleans += PMBUS_POUT_BOOLEANS_PER_PAGE; - max_labels++; - } - if (info->func[page] & PMBUS_HAVE_FAN12) { - max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN; - max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN; - } - if (info->func[page] & PMBUS_HAVE_FAN34) { - max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN; - max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN; - } - if (info->func[page] & PMBUS_HAVE_TEMP) { - max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; - max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; - } - if (info->func[page] & PMBUS_HAVE_TEMP2) { - max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; - max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; - } - if (info->func[page] & PMBUS_HAVE_TEMP3) { - max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; - max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; - } - } - data->max_sensors = max_sensors; - data->max_booleans = max_booleans; - data->max_labels = max_labels; - data->max_attributes = max_sensors + max_booleans + max_labels; -} - -/* - * Search for attributes. Allocate sensors, booleans, and labels as needed. - */ - -/* - * The pmbus_limit_attr structure describes a single limit attribute - * and its associated alarm attribute. - */ -struct pmbus_limit_attr { - u8 reg; /* Limit register */ - const char *attr; /* Attribute name */ - const char *alarm; /* Alarm attribute name */ - u32 sbit; /* Alarm attribute status bit */ -}; - -/* - * The pmbus_sensor_attr structure describes one sensor attribute. This - * description includes a reference to the associated limit attributes. - */ -struct pmbus_sensor_attr { - u8 reg; /* sensor register */ - enum pmbus_sensor_classes class;/* sensor class */ - const char *label; /* sensor label */ - bool paged; /* true if paged sensor */ - bool update; /* true if update needed */ - bool compare; /* true if compare function needed */ - u32 func; /* sensor mask */ - u32 sfunc; /* sensor status mask */ - int sbase; /* status base register */ - u32 gbit; /* generic status bit */ - const struct pmbus_limit_attr *limit;/* limit registers */ - int nlimit; /* # of limit registers */ -}; - -/* - * Add a set of limit attributes and, if supported, the associated - * alarm attributes. - */ -static bool pmbus_add_limit_attrs(struct i2c_client *client, - struct pmbus_data *data, - const struct pmbus_driver_info *info, - const char *name, int index, int page, - int cbase, - const struct pmbus_sensor_attr *attr) -{ - const struct pmbus_limit_attr *l = attr->limit; - int nlimit = attr->nlimit; - bool have_alarm = false; - int i, cindex; - - for (i = 0; i < nlimit; i++) { - if (pmbus_check_word_register(client, page, l->reg)) { - cindex = data->num_sensors; - pmbus_add_sensor(data, name, l->attr, index, page, - l->reg, attr->class, attr->update, - false); - if (info->func[page] & attr->sfunc) { - if (attr->compare) { - pmbus_add_boolean_cmp(data, name, - l->alarm, index, - cbase, cindex, - attr->sbase + page, l->sbit); - } else { - pmbus_add_boolean_reg(data, name, - l->alarm, index, - attr->sbase + page, l->sbit); - } - have_alarm = true; - } - } - l++; - } - return have_alarm; -} - -static void pmbus_add_sensor_attrs_one(struct i2c_client *client, - struct pmbus_data *data, - const struct pmbus_driver_info *info, - const char *name, - int index, int page, - const struct pmbus_sensor_attr *attr) -{ - bool have_alarm; - int cbase = data->num_sensors; - - if (attr->label) - pmbus_add_label(data, name, index, attr->label, - attr->paged ? page + 1 : 0); - pmbus_add_sensor(data, name, "input", index, page, attr->reg, - attr->class, true, true); - if (attr->sfunc) { - have_alarm = pmbus_add_limit_attrs(client, data, info, name, - index, page, cbase, attr); - /* - * Add generic alarm attribute only if there are no individual - * alarm attributes, and if there is a global alarm bit. - */ - if (!have_alarm && attr->gbit) - pmbus_add_boolean_reg(data, name, "alarm", index, - PB_STATUS_BASE + page, - attr->gbit); - } -} - -static void pmbus_add_sensor_attrs(struct i2c_client *client, - struct pmbus_data *data, - const char *name, - const struct pmbus_sensor_attr *attrs, - int nattrs) -{ - const struct pmbus_driver_info *info = data->info; - int index, i; - - index = 1; - for (i = 0; i < nattrs; i++) { - int page, pages; - - pages = attrs->paged ? info->pages : 1; - for (page = 0; page < pages; page++) { - if (!(info->func[page] & attrs->func)) - continue; - pmbus_add_sensor_attrs_one(client, data, info, name, - index, page, attrs); - index++; - } - attrs++; - } -} - -static const struct pmbus_limit_attr vin_limit_attrs[] = { - { - .reg = PMBUS_VIN_UV_WARN_LIMIT, - .attr = "min", - .alarm = "min_alarm", - .sbit = PB_VOLTAGE_UV_WARNING, - }, { - .reg = PMBUS_VIN_UV_FAULT_LIMIT, - .attr = "lcrit", - .alarm = "lcrit_alarm", - .sbit = PB_VOLTAGE_UV_FAULT, - }, { - .reg = PMBUS_VIN_OV_WARN_LIMIT, - .attr = "max", - .alarm = "max_alarm", - .sbit = PB_VOLTAGE_OV_WARNING, - }, { - .reg = PMBUS_VIN_OV_FAULT_LIMIT, - .attr = "crit", - .alarm = "crit_alarm", - .sbit = PB_VOLTAGE_OV_FAULT, - }, -}; - -static const struct pmbus_limit_attr vout_limit_attrs[] = { - { - .reg = PMBUS_VOUT_UV_WARN_LIMIT, - .attr = "min", - .alarm = "min_alarm", - .sbit = PB_VOLTAGE_UV_WARNING, - }, { - .reg = PMBUS_VOUT_UV_FAULT_LIMIT, - .attr = "lcrit", - .alarm = "lcrit_alarm", - .sbit = PB_VOLTAGE_UV_FAULT, - }, { - .reg = PMBUS_VOUT_OV_WARN_LIMIT, - .attr = "max", - .alarm = "max_alarm", - .sbit = PB_VOLTAGE_OV_WARNING, - }, { - .reg = PMBUS_VOUT_OV_FAULT_LIMIT, - .attr = "crit", - .alarm = "crit_alarm", - .sbit = PB_VOLTAGE_OV_FAULT, - } -}; - -static const struct pmbus_sensor_attr voltage_attributes[] = { - { - .reg = PMBUS_READ_VIN, - .class = PSC_VOLTAGE_IN, - .label = "vin", - .func = PMBUS_HAVE_VIN, - .sfunc = PMBUS_HAVE_STATUS_INPUT, - .sbase = PB_STATUS_INPUT_BASE, - .gbit = PB_STATUS_VIN_UV, - .limit = vin_limit_attrs, - .nlimit = ARRAY_SIZE(vin_limit_attrs), - }, { - .reg = PMBUS_READ_VCAP, - .class = PSC_VOLTAGE_IN, - .label = "vcap", - .func = PMBUS_HAVE_VCAP, - }, { - .reg = PMBUS_READ_VOUT, - .class = PSC_VOLTAGE_OUT, - .label = "vout", - .paged = true, - .func = PMBUS_HAVE_VOUT, - .sfunc = PMBUS_HAVE_STATUS_VOUT, - .sbase = PB_STATUS_VOUT_BASE, - .gbit = PB_STATUS_VOUT_OV, - .limit = vout_limit_attrs, - .nlimit = ARRAY_SIZE(vout_limit_attrs), - } -}; - -/* Current attributes */ - -static const struct pmbus_limit_attr iin_limit_attrs[] = { - { - .reg = PMBUS_IIN_OC_WARN_LIMIT, - .attr = "max", - .alarm = "max_alarm", - .sbit = PB_IIN_OC_WARNING, - }, { - .reg = PMBUS_IIN_OC_FAULT_LIMIT, - .attr = "crit", - .alarm = "crit_alarm", - .sbit = PB_IIN_OC_FAULT, - } -}; - -static const struct pmbus_limit_attr iout_limit_attrs[] = { - { - .reg = PMBUS_IOUT_OC_WARN_LIMIT, - .attr = "max", - .alarm = "max_alarm", - .sbit = PB_IOUT_OC_WARNING, - }, { - .reg = PMBUS_IOUT_UC_FAULT_LIMIT, - .attr = "lcrit", - .alarm = "lcrit_alarm", - .sbit = PB_IOUT_UC_FAULT, - }, { - .reg = PMBUS_IOUT_OC_FAULT_LIMIT, - .attr = "crit", - .alarm = "crit_alarm", - .sbit = PB_IOUT_OC_FAULT, - } -}; - -static const struct pmbus_sensor_attr current_attributes[] = { - { - .reg = PMBUS_READ_IIN, - .class = PSC_CURRENT_IN, - .label = "iin", - .func = PMBUS_HAVE_IIN, - .sfunc = PMBUS_HAVE_STATUS_INPUT, - .sbase = PB_STATUS_INPUT_BASE, - .limit = iin_limit_attrs, - .nlimit = ARRAY_SIZE(iin_limit_attrs), - }, { - .reg = PMBUS_READ_IOUT, - .class = PSC_CURRENT_OUT, - .label = "iout", - .paged = true, - .func = PMBUS_HAVE_IOUT, - .sfunc = PMBUS_HAVE_STATUS_IOUT, - .sbase = PB_STATUS_IOUT_BASE, - .gbit = PB_STATUS_IOUT_OC, - .limit = iout_limit_attrs, - .nlimit = ARRAY_SIZE(iout_limit_attrs), - } -}; - -/* Power attributes */ - -static const struct pmbus_limit_attr pin_limit_attrs[] = { - { - .reg = PMBUS_PIN_OP_WARN_LIMIT, - .attr = "max", - .alarm = "alarm", - .sbit = PB_PIN_OP_WARNING, - } -}; - -static const struct pmbus_limit_attr pout_limit_attrs[] = { - { - .reg = PMBUS_POUT_MAX, - .attr = "cap", - .alarm = "cap_alarm", - .sbit = PB_POWER_LIMITING, - }, { - .reg = PMBUS_POUT_OP_WARN_LIMIT, - .attr = "max", - .alarm = "max_alarm", - .sbit = PB_POUT_OP_WARNING, - }, { - .reg = PMBUS_POUT_OP_FAULT_LIMIT, - .attr = "crit", - .alarm = "crit_alarm", - .sbit = PB_POUT_OP_FAULT, - } -}; - -static const struct pmbus_sensor_attr power_attributes[] = { - { - .reg = PMBUS_READ_PIN, - .class = PSC_POWER, - .label = "pin", - .func = PMBUS_HAVE_PIN, - .sfunc = PMBUS_HAVE_STATUS_INPUT, - .sbase = PB_STATUS_INPUT_BASE, - .limit = pin_limit_attrs, - .nlimit = ARRAY_SIZE(pin_limit_attrs), - }, { - .reg = PMBUS_READ_POUT, - .class = PSC_POWER, - .label = "pout", - .paged = true, - .func = PMBUS_HAVE_POUT, - .sfunc = PMBUS_HAVE_STATUS_IOUT, - .sbase = PB_STATUS_IOUT_BASE, - .limit = pout_limit_attrs, - .nlimit = ARRAY_SIZE(pout_limit_attrs), - } -}; - -/* Temperature atributes */ - -static const struct pmbus_limit_attr temp_limit_attrs[] = { - { - .reg = PMBUS_UT_WARN_LIMIT, - .attr = "min", - .alarm = "min_alarm", - .sbit = PB_TEMP_UT_WARNING, - }, { - .reg = PMBUS_UT_FAULT_LIMIT, - .attr = "lcrit", - .alarm = "lcrit_alarm", - .sbit = PB_TEMP_UT_FAULT, - }, { - .reg = PMBUS_OT_WARN_LIMIT, - .attr = "max", - .alarm = "max_alarm", - .sbit = PB_TEMP_OT_WARNING, - }, { - .reg = PMBUS_OT_FAULT_LIMIT, - .attr = "crit", - .alarm = "crit_alarm", - .sbit = PB_TEMP_OT_FAULT, - } -}; - -static const struct pmbus_sensor_attr temp_attributes[] = { - { - .reg = PMBUS_READ_TEMPERATURE_1, - .class = PSC_TEMPERATURE, - .paged = true, - .update = true, - .compare = true, - .func = PMBUS_HAVE_TEMP, - .sfunc = PMBUS_HAVE_STATUS_TEMP, - .sbase = PB_STATUS_TEMP_BASE, - .gbit = PB_STATUS_TEMPERATURE, - .limit = temp_limit_attrs, - .nlimit = ARRAY_SIZE(temp_limit_attrs), - }, { - .reg = PMBUS_READ_TEMPERATURE_2, - .class = PSC_TEMPERATURE, - .paged = true, - .update = true, - .compare = true, - .func = PMBUS_HAVE_TEMP2, - .sfunc = PMBUS_HAVE_STATUS_TEMP, - .sbase = PB_STATUS_TEMP_BASE, - .gbit = PB_STATUS_TEMPERATURE, - .limit = temp_limit_attrs, - .nlimit = ARRAY_SIZE(temp_limit_attrs), - }, { - .reg = PMBUS_READ_TEMPERATURE_3, - .class = PSC_TEMPERATURE, - .paged = true, - .update = true, - .compare = true, - .func = PMBUS_HAVE_TEMP3, - .sfunc = PMBUS_HAVE_STATUS_TEMP, - .sbase = PB_STATUS_TEMP_BASE, - .gbit = PB_STATUS_TEMPERATURE, - .limit = temp_limit_attrs, - .nlimit = ARRAY_SIZE(temp_limit_attrs), - } -}; - -static const int pmbus_fan_registers[] = { - PMBUS_READ_FAN_SPEED_1, - PMBUS_READ_FAN_SPEED_2, - PMBUS_READ_FAN_SPEED_3, - PMBUS_READ_FAN_SPEED_4 -}; - -static const int pmbus_fan_config_registers[] = { - PMBUS_FAN_CONFIG_12, - PMBUS_FAN_CONFIG_12, - PMBUS_FAN_CONFIG_34, - PMBUS_FAN_CONFIG_34 -}; - -static const int pmbus_fan_status_registers[] = { - PMBUS_STATUS_FAN_12, - PMBUS_STATUS_FAN_12, - PMBUS_STATUS_FAN_34, - PMBUS_STATUS_FAN_34 -}; - -static const u32 pmbus_fan_flags[] = { - PMBUS_HAVE_FAN12, - PMBUS_HAVE_FAN12, - PMBUS_HAVE_FAN34, - PMBUS_HAVE_FAN34 -}; - -static const u32 pmbus_fan_status_flags[] = { - PMBUS_HAVE_STATUS_FAN12, - PMBUS_HAVE_STATUS_FAN12, - PMBUS_HAVE_STATUS_FAN34, - PMBUS_HAVE_STATUS_FAN34 -}; - -/* Fans */ -static void pmbus_add_fan_attributes(struct i2c_client *client, - struct pmbus_data *data) -{ - const struct pmbus_driver_info *info = data->info; - int index = 1; - int page; - - for (page = 0; page < info->pages; page++) { - int f; - - for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) { - int regval; - - if (!(info->func[page] & pmbus_fan_flags[f])) - break; - - if (!pmbus_check_word_register(client, page, - pmbus_fan_registers[f])) - break; - - /* - * Skip fan if not installed. - * Each fan configuration register covers multiple fans, - * so we have to do some magic. - */ - regval = _pmbus_read_byte_data(client, page, - pmbus_fan_config_registers[f]); - if (regval < 0 || - (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4))))) - continue; - - pmbus_add_sensor(data, "fan", "input", index, page, - pmbus_fan_registers[f], PSC_FAN, true, - true); - - /* - * Each fan status register covers multiple fans, - * so we have to do some magic. - */ - if ((info->func[page] & pmbus_fan_status_flags[f]) && - pmbus_check_byte_register(client, - page, pmbus_fan_status_registers[f])) { - int base; - - if (f > 1) /* fan 3, 4 */ - base = PB_STATUS_FAN34_BASE + page; - else - base = PB_STATUS_FAN_BASE + page; - pmbus_add_boolean_reg(data, "fan", "alarm", - index, base, - PB_FAN_FAN1_WARNING >> (f & 1)); - pmbus_add_boolean_reg(data, "fan", "fault", - index, base, - PB_FAN_FAN1_FAULT >> (f & 1)); - } - index++; - } - } -} - -static void pmbus_find_attributes(struct i2c_client *client, - struct pmbus_data *data) -{ - /* Voltage sensors */ - pmbus_add_sensor_attrs(client, data, "in", voltage_attributes, - ARRAY_SIZE(voltage_attributes)); - - /* Current sensors */ - pmbus_add_sensor_attrs(client, data, "curr", current_attributes, - ARRAY_SIZE(current_attributes)); - - /* Power sensors */ - pmbus_add_sensor_attrs(client, data, "power", power_attributes, - ARRAY_SIZE(power_attributes)); - - /* Temperature sensors */ - pmbus_add_sensor_attrs(client, data, "temp", temp_attributes, - ARRAY_SIZE(temp_attributes)); - - /* Fans */ - pmbus_add_fan_attributes(client, data); -} - -/* - * Identify chip parameters. - * This function is called for all chips. - */ -static int pmbus_identify_common(struct i2c_client *client, - struct pmbus_data *data) -{ - int vout_mode = -1, exponent; - - if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) - vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); - if (vout_mode >= 0 && vout_mode != 0xff) { - /* - * Not all chips support the VOUT_MODE command, - * so a failure to read it is not an error. - */ - switch (vout_mode >> 5) { - case 0: /* linear mode */ - if (data->info->direct[PSC_VOLTAGE_OUT]) - return -ENODEV; - - exponent = vout_mode & 0x1f; - /* and sign-extend it */ - if (exponent & 0x10) - exponent |= ~0x1f; - data->exponent = exponent; - break; - case 2: /* direct mode */ - if (!data->info->direct[PSC_VOLTAGE_OUT]) - return -ENODEV; - break; - default: - return -ENODEV; - } - } - - /* Determine maximum number of sensors, booleans, and labels */ - pmbus_find_max_attr(client, data); - pmbus_clear_fault_page(client, 0); - return 0; -} - -int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, - struct pmbus_driver_info *info) -{ - const struct pmbus_platform_data *pdata = client->dev.platform_data; - struct pmbus_data *data; - int ret; - - if (!info) { - dev_err(&client->dev, "Missing chip information"); - return -ENODEV; - } - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE - | I2C_FUNC_SMBUS_BYTE_DATA - | I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; - - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) { - dev_err(&client->dev, "No memory to allocate driver data\n"); - return -ENOMEM; - } - - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - - /* Bail out if PMBus status register does not exist. */ - if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0) { - dev_err(&client->dev, "PMBus status register not found\n"); - ret = -ENODEV; - goto out_data; - } - - if (pdata) - data->flags = pdata->flags; - data->info = info; - - pmbus_clear_faults(client); - - if (info->identify) { - ret = (*info->identify)(client, info); - if (ret < 0) { - dev_err(&client->dev, "Chip identification failed\n"); - goto out_data; - } - } - - if (info->pages <= 0 || info->pages > PMBUS_PAGES) { - dev_err(&client->dev, "Bad number of PMBus pages: %d\n", - info->pages); - ret = -EINVAL; - goto out_data; - } - /* - * Bail out if more than one page was configured, but we can not - * select the highest page. This is an indication that the wrong - * chip type was selected. Better bail out now than keep - * returning errors later on. - */ - if (info->pages > 1 && pmbus_set_page(client, info->pages - 1) < 0) { - dev_err(&client->dev, "Failed to select page %d\n", - info->pages - 1); - ret = -EINVAL; - goto out_data; - } - - ret = pmbus_identify_common(client, data); - if (ret < 0) { - dev_err(&client->dev, "Failed to identify chip capabilities\n"); - goto out_data; - } - - ret = -ENOMEM; - data->sensors = kzalloc(sizeof(struct pmbus_sensor) * data->max_sensors, - GFP_KERNEL); - if (!data->sensors) { - dev_err(&client->dev, "No memory to allocate sensor data\n"); - goto out_data; - } - - data->booleans = kzalloc(sizeof(struct pmbus_boolean) - * data->max_booleans, GFP_KERNEL); - if (!data->booleans) { - dev_err(&client->dev, "No memory to allocate boolean data\n"); - goto out_sensors; - } - - data->labels = kzalloc(sizeof(struct pmbus_label) * data->max_labels, - GFP_KERNEL); - if (!data->labels) { - dev_err(&client->dev, "No memory to allocate label data\n"); - goto out_booleans; - } - - data->attributes = kzalloc(sizeof(struct attribute *) - * data->max_attributes, GFP_KERNEL); - if (!data->attributes) { - dev_err(&client->dev, "No memory to allocate attribute data\n"); - goto out_labels; - } - - pmbus_find_attributes(client, data); - - /* - * If there are no attributes, something is wrong. - * Bail out instead of trying to register nothing. - */ - if (!data->num_attributes) { - dev_err(&client->dev, "No attributes found\n"); - ret = -ENODEV; - goto out_attributes; - } - - /* Register sysfs hooks */ - data->group.attrs = data->attributes; - ret = sysfs_create_group(&client->dev.kobj, &data->group); - if (ret) { - dev_err(&client->dev, "Failed to create sysfs entries\n"); - goto out_attributes; - } - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - ret = PTR_ERR(data->hwmon_dev); - dev_err(&client->dev, "Failed to register hwmon device\n"); - goto out_hwmon_device_register; - } - return 0; - -out_hwmon_device_register: - sysfs_remove_group(&client->dev.kobj, &data->group); -out_attributes: - kfree(data->attributes); -out_labels: - kfree(data->labels); -out_booleans: - kfree(data->booleans); -out_sensors: - kfree(data->sensors); -out_data: - kfree(data); - return ret; -} -EXPORT_SYMBOL_GPL(pmbus_do_probe); - -int pmbus_do_remove(struct i2c_client *client) -{ - struct pmbus_data *data = i2c_get_clientdata(client); - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &data->group); - kfree(data->attributes); - kfree(data->labels); - kfree(data->booleans); - kfree(data->sensors); - kfree(data); - return 0; -} -EXPORT_SYMBOL_GPL(pmbus_do_remove); - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus core driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/ucd9000.c b/drivers/hwmon/ucd9000.c deleted file mode 100644 index ace1c73..0000000 --- a/drivers/hwmon/ucd9000.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Hardware monitoring driver for UCD90xxx Sequencer and System Health - * Controller series - * - * Copyright (C) 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c/pmbus.h> -#include "pmbus.h" - -enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 }; - -#define UCD9000_MONITOR_CONFIG 0xd5 -#define UCD9000_NUM_PAGES 0xd6 -#define UCD9000_FAN_CONFIG_INDEX 0xe7 -#define UCD9000_FAN_CONFIG 0xe8 -#define UCD9000_DEVICE_ID 0xfd - -#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07) -#define UCD9000_MON_PAGE(x) ((x) & 0x0f) - -#define UCD9000_MON_VOLTAGE 1 -#define UCD9000_MON_TEMPERATURE 2 -#define UCD9000_MON_CURRENT 3 -#define UCD9000_MON_VOLTAGE_HW 4 - -#define UCD9000_NUM_FAN 4 - -struct ucd9000_data { - u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; - struct pmbus_driver_info info; -}; -#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) - -static int ucd9000_get_fan_config(struct i2c_client *client, int fan) -{ - int fan_config = 0; - struct ucd9000_data *data - = to_ucd9000_data(pmbus_get_driver_info(client)); - - if (data->fan_data[fan][3] & 1) - fan_config |= PB_FAN_2_INSTALLED; /* Use lower bit position */ - - /* Pulses/revolution */ - fan_config |= (data->fan_data[fan][3] & 0x06) >> 1; - - return fan_config; -} - -static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg) -{ - int ret = 0; - int fan_config; - - switch (reg) { - case PMBUS_FAN_CONFIG_12: - if (page) - return -EINVAL; - - ret = ucd9000_get_fan_config(client, 0); - if (ret < 0) - return ret; - fan_config = ret << 4; - ret = ucd9000_get_fan_config(client, 1); - if (ret < 0) - return ret; - fan_config |= ret; - ret = fan_config; - break; - case PMBUS_FAN_CONFIG_34: - if (page) - return -EINVAL; - - ret = ucd9000_get_fan_config(client, 2); - if (ret < 0) - return ret; - fan_config = ret << 4; - ret = ucd9000_get_fan_config(client, 3); - if (ret < 0) - return ret; - fan_config |= ret; - ret = fan_config; - break; - default: - ret = -ENODATA; - break; - } - return ret; -} - -static const struct i2c_device_id ucd9000_id[] = { - {"ucd9000", ucd9000}, - {"ucd90120", ucd90120}, - {"ucd90124", ucd90124}, - {"ucd9090", ucd9090}, - {"ucd90910", ucd90910}, - {} -}; -MODULE_DEVICE_TABLE(i2c, ucd9000_id); - -static int ucd9000_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; - struct ucd9000_data *data; - struct pmbus_driver_info *info; - const struct i2c_device_id *mid; - int i, ret; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA)) - return -ENODEV; - - ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID, - block_buffer); - if (ret < 0) { - dev_err(&client->dev, "Failed to read device ID\n"); - return ret; - } - block_buffer[ret] = '\0'; - dev_info(&client->dev, "Device ID %s\n", block_buffer); - - mid = NULL; - for (i = 0; i < ARRAY_SIZE(ucd9000_id); i++) { - mid = &ucd9000_id[i]; - if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) - break; - } - if (!mid || !strlen(mid->name)) { - dev_err(&client->dev, "Unsupported device\n"); - return -ENODEV; - } - - if (id->driver_data != ucd9000 && id->driver_data != mid->driver_data) - dev_notice(&client->dev, - "Device mismatch: Configured %s, detected %s\n", - id->name, mid->name); - - data = kzalloc(sizeof(struct ucd9000_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - info = &data->info; - - ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES); - if (ret < 0) { - dev_err(&client->dev, - "Failed to read number of active pages\n"); - goto out; - } - info->pages = ret; - if (!info->pages) { - dev_err(&client->dev, "No pages configured\n"); - ret = -ENODEV; - goto out; - } - - /* The internal temperature sensor is always active */ - info->func[0] = PMBUS_HAVE_TEMP; - - /* Everything else is configurable */ - ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG, - block_buffer); - if (ret <= 0) { - dev_err(&client->dev, "Failed to read configuration data\n"); - ret = -ENODEV; - goto out; - } - for (i = 0; i < ret; i++) { - int page = UCD9000_MON_PAGE(block_buffer[i]); - - if (page >= info->pages) - continue; - - switch (UCD9000_MON_TYPE(block_buffer[i])) { - case UCD9000_MON_VOLTAGE: - case UCD9000_MON_VOLTAGE_HW: - info->func[page] |= PMBUS_HAVE_VOUT - | PMBUS_HAVE_STATUS_VOUT; - break; - case UCD9000_MON_TEMPERATURE: - info->func[page] |= PMBUS_HAVE_TEMP2 - | PMBUS_HAVE_STATUS_TEMP; - break; - case UCD9000_MON_CURRENT: - info->func[page] |= PMBUS_HAVE_IOUT - | PMBUS_HAVE_STATUS_IOUT; - break; - default: - break; - } - } - - /* Fan configuration */ - if (mid->driver_data == ucd90124) { - for (i = 0; i < UCD9000_NUM_FAN; i++) { - i2c_smbus_write_byte_data(client, - UCD9000_FAN_CONFIG_INDEX, i); - ret = i2c_smbus_read_block_data(client, - UCD9000_FAN_CONFIG, - data->fan_data[i]); - if (ret < 0) - goto out; - } - i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0); - - info->read_byte_data = ucd9000_read_byte_data; - info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 - | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34; - } - - ret = pmbus_do_probe(client, mid, info); - if (ret < 0) - goto out; - return 0; - -out: - kfree(data); - return ret; -} - -static int ucd9000_remove(struct i2c_client *client) -{ - int ret; - struct ucd9000_data *data; - - data = to_ucd9000_data(pmbus_get_driver_info(client)); - ret = pmbus_do_remove(client); - kfree(data); - return ret; -} - - -/* This is the driver that will be inserted */ -static struct i2c_driver ucd9000_driver = { - .driver = { - .name = "ucd9000", - }, - .probe = ucd9000_probe, - .remove = ucd9000_remove, - .id_table = ucd9000_id, -}; - -static int __init ucd9000_init(void) -{ - return i2c_add_driver(&ucd9000_driver); -} - -static void __exit ucd9000_exit(void) -{ - i2c_del_driver(&ucd9000_driver); -} - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx"); -MODULE_LICENSE("GPL"); -module_init(ucd9000_init); -module_exit(ucd9000_exit); diff --git a/drivers/hwmon/ucd9200.c b/drivers/hwmon/ucd9200.c deleted file mode 100644 index ffcc1cf..0000000 --- a/drivers/hwmon/ucd9200.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Hardware monitoring driver for ucd9200 series Digital PWM System Controllers - * - * Copyright (C) 2011 Ericsson AB. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c/pmbus.h> -#include "pmbus.h" - -#define UCD9200_PHASE_INFO 0xd2 -#define UCD9200_DEVICE_ID 0xfd - -enum chips { ucd9200, ucd9220, ucd9222, ucd9224, ucd9240, ucd9244, ucd9246, - ucd9248 }; - -static const struct i2c_device_id ucd9200_id[] = { - {"ucd9200", ucd9200}, - {"ucd9220", ucd9220}, - {"ucd9222", ucd9222}, - {"ucd9224", ucd9224}, - {"ucd9240", ucd9240}, - {"ucd9244", ucd9244}, - {"ucd9246", ucd9246}, - {"ucd9248", ucd9248}, - {} -}; -MODULE_DEVICE_TABLE(i2c, ucd9200_id); - -static int ucd9200_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; - struct pmbus_driver_info *info; - const struct i2c_device_id *mid; - int i, j, ret; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA)) - return -ENODEV; - - ret = i2c_smbus_read_block_data(client, UCD9200_DEVICE_ID, - block_buffer); - if (ret < 0) { - dev_err(&client->dev, "Failed to read device ID\n"); - return ret; - } - block_buffer[ret] = '\0'; - dev_info(&client->dev, "Device ID %s\n", block_buffer); - - mid = NULL; - for (i = 0; i < ARRAY_SIZE(ucd9200_id); i++) { - mid = &ucd9200_id[i]; - if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) - break; - } - if (!mid || !strlen(mid->name)) { - dev_err(&client->dev, "Unsupported device\n"); - return -ENODEV; - } - if (id->driver_data != ucd9200 && id->driver_data != mid->driver_data) - dev_notice(&client->dev, - "Device mismatch: Configured %s, detected %s\n", - id->name, mid->name); - - info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - ret = i2c_smbus_read_block_data(client, UCD9200_PHASE_INFO, - block_buffer); - if (ret < 0) { - dev_err(&client->dev, "Failed to read phase information\n"); - goto out; - } - - /* - * Calculate number of configured pages (rails) from PHASE_INFO - * register. - * Rails have to be sequential, so we can abort after finding - * the first unconfigured rail. - */ - info->pages = 0; - for (i = 0; i < ret; i++) { - if (!block_buffer[i]) - break; - info->pages++; - } - if (!info->pages) { - dev_err(&client->dev, "No rails configured\n"); - ret = -ENODEV; - goto out; - } - dev_info(&client->dev, "%d rails configured\n", info->pages); - - /* - * Set PHASE registers on all pages to 0xff to ensure that phase - * specific commands will apply to all phases of a given page (rail). - * This only affects the READ_IOUT and READ_TEMPERATURE2 registers. - * READ_IOUT will return the sum of currents of all phases of a rail, - * and READ_TEMPERATURE2 will return the maximum temperature detected - * for the the phases of the rail. - */ - for (i = 0; i < info->pages; i++) { - /* - * Setting PAGE & PHASE fails once in a while for no obvious - * reason, so we need to retry a couple of times. - */ - for (j = 0; j < 3; j++) { - ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i); - if (ret < 0) - continue; - ret = i2c_smbus_write_byte_data(client, PMBUS_PHASE, - 0xff); - if (ret < 0) - continue; - break; - } - if (ret < 0) { - dev_err(&client->dev, - "Failed to initialize PHASE registers\n"); - goto out; - } - } - if (info->pages > 1) - i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); - - info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT | - PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | - PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | - PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | - PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; - - for (i = 1; i < info->pages; i++) - info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | - PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | - PMBUS_HAVE_POUT | - PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; - - /* ucd9240 supports a single fan */ - if (mid->driver_data == ucd9240) - info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12; - - ret = pmbus_do_probe(client, mid, info); - if (ret < 0) - goto out; - return 0; -out: - kfree(info); - return ret; -} - -static int ucd9200_remove(struct i2c_client *client) -{ - int ret; - const struct pmbus_driver_info *info; - - info = pmbus_get_driver_info(client); - ret = pmbus_do_remove(client); - kfree(info); - return ret; -} - - -/* This is the driver that will be inserted */ -static struct i2c_driver ucd9200_driver = { - .driver = { - .name = "ucd9200", - }, - .probe = ucd9200_probe, - .remove = ucd9200_remove, - .id_table = ucd9200_id, -}; - -static int __init ucd9200_init(void) -{ - return i2c_add_driver(&ucd9200_driver); -} - -static void __exit ucd9200_exit(void) -{ - i2c_del_driver(&ucd9200_driver); -} - -MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for TI UCD922x, UCD924x"); -MODULE_LICENSE("GPL"); -module_init(ucd9200_init); -module_exit(ucd9200_exit); -- 1.7.3.1 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
