Hello, this is a another configuration file for the MSI GF615M-P33 (MS-7597) motherboard, in case someone finds it usefull. ==========BEGIN sensors3.conf========== # lm_sensors configuration file for the MSI GF615M-P33 rev 1.3 (MS-7597)# 2011-07-14 ,Kid from Belgrade
# tweaked from config for MSI P35 Neo / MSI MS-7360 motherboard
# 2007-09-21, Andre Jagusch
# Comments welcome!
chip "f71889ed-*"
# Temperature
label temp1 "CPU"
label temp2 "System"
ignore temp3
# Fans
label fan1 "CPU"
label fan2 "System"
label fan3 "Misc"
# label fan3 "Power"
# label fan4 "Aux"
# sensors in2 in3 , in6 , in7 , in8 may be ignored since
# they are not shown in BIOS for MS-7597
# in6 is allways 0.00
# Voltage
label in0 "3.3V"
label in1 "Vcore"
# ignore in2
# ignore in3
label in2 "Vdimm"
label in3 "Vchip"
label in4 "+5V"
ignore in6
label in5 "12V"
# ignore in7
# ignore in8
label in7 "3VSB"
label in8 "Battery"
# never change the in0, in7 and in8 compute, these are hardwired in the chip!
# +5V +12V +3.3V computess looking fine for MS-7597 ,nothing changed
compute in0 (@ * 2), (@ / 2)
compute in2 (@ * 2), (@ / 2)
compute in3 (@ * 2), (@ / 2)
compute in4 (@ * 5.25), (@ / 5.25)
compute in5 (@ * 11), (@ / 11)
compute in6 (@ * 6.585), (@ / 6.585)
compute in7 (@ * 2), (@ / 2)
compute in8 (@ * 2), (@ / 2)
# on fintek , first sensor is below or near the cpu socket (how to determine this?)
# CPU temperature is also measurable by on-dye sensor on k10 series
# now i have not find this anywhere and corection is corelated with fintek
# tweaked for Athlon II x2 250 ,may defere for others
chip "k10temp-*"
label temp1 "CPU K10 Temp"
compute temp1 (@ + 5.5), (@ - 5.5)
==========END sensors3.conf==========
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
