Hi, I posted the mobo config below some time ago, can someone please add it on the wiki at http://www.lm-sensors.org/wiki/Configurations/Sapphire ? Thanks! ---------- Forwarded message ---------- Subject: sensors.conf for Sapphire Pure Fusion Mini E350 motherboard Date: Fri, 10 Jun 2011 02:31:14 +0200 (CEST) To: lm-sensors@xxxxxxxxxxxxxx Hi, I just wanted to contribute my sensors.conf for the Sapphire Pure Fusion Mini E350 motherboard. I'm quite confident about the accuracy of the config, I spent a fair amount of time verifying each bit. I also posted this here: http://scientificlinuxforum.org/index.php?showtopic=415 #---------------------------------- # lm-sensors config for Sapphire Pure Fusion Mini E350 board chip "f71808e-*" label in0 "VCC +3.3V" # E-350 Vcore range is ~ 0.5V-1.35V (lowest idle state to max load) label in1 "CPU Vcore" ignore in2 label in3 "DDR3 VDIMM" label in4 "FCH +1.1V" label in5 "PCIe +1.8V" label in7 "3VSB +3.3V" label in8 "VBAT +3.0V" compute in0 @*2, @/2 compute in3 (@ * 1.465), (@ / 1.465) compute in7 @*2, @/2 compute in8 @*2, @/2 label fan1 "CPU Fan" label fan2 "SYS Fan" ignore fan3 label temp1 "SYS Temp1" label temp2 "SYS Temp2" chip "k10temp-*" label temp1 "CPU Temp" #----------------------------------------------- _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
