On 2011년 06월 21일 05:20, Guenter Roeck wrote: > On Mon, 2011-06-20 at 03:48 -0400, Donggeun Kim wrote: >> This patch adds support for NTC Thermistor series. In this release, the >> following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473, >> and NCP15WL333. This driver is based on the datasheet of MURATA. >> >> The driver in the patch does conversion from the raw ADC value >> (either voltage or resistence) to temperature. In order to use >> voltage values as input, the circuit schematics should be provided >> with the platform data. A compensation table for each type of thermistor >> is provided for the conversion. >> >> Signed-off-by: Donggeun Kim <dg77.kim@xxxxxxxxxxx> >> Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx> >> Signed-off-by: KyungMin Park <kyungmin.park@xxxxxxxxxxx> > > Applied to -next. > > Thanks, > Guenter > > > Thanks for your thorough review. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
