Hi all, Here is my report. I use w83627ehf driver compiled from kernel tree (2.6.39-gentoo-r1). # modprobe w83627ehf # dmesg|tail [16562.925302] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [16562.925303] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [16562.925304] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [16562.925306] [17380.277397] i2c i2c-4: sendbytes: NAK bailout. [17380.363084] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID [17390.373045] i2c i2c-4: sendbytes: NAK bailout. [18437.620983] xml-purge[27556]: segfault at 0 ip 0000000000400a2a sp 00007fff13a71860 error 4 in xml-purge[400000+1000] [24658.366912] i2c i2c-4: sendbytes: NAK bailout. [30731.174173] w83627ehf: Found NCT6775F chip at 0x290 Driver was loaded without problem. Here is sensors command output (i don't write anything in sensors3.conf): # sensors radeon-pci-0400 Adapter: PCI adapter temp1: +59.0°C k10temp-pci-00c3 Adapter: PCI adapter temp1: +27.1°C (high = +70.0°C) nct6775-isa-0290 Adapter: ISA adapter Vcore: +1.07 V (min = +0.00 V, max = +1.74 V) in1: +1.89 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM +3.3V: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM in4: +0.07 V (min = +0.00 V, max = +0.00 V) ALARM in5: +1.70 V (min = +0.00 V, max = +0.00 V) ALARM in6: +0.07 V (min = +0.00 V, max = +0.00 V) ALARM 3VSB: +3.46 V (min = +0.00 V, max = +0.00 V) ALARM Vbat: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 0 RPM (min = 0 RPM, div = 128) fan2: 3308 RPM (min = 0 RPM, div = 8) ALARM fan3: 0 RPM (min = 0 RPM, div = 128) SYSTIN: +37.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor CPUTIN: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN: +127.5°C (high = +73.0°C, hyst = +73.0°C) ALARM sensor = thermistor cpu0_vid: +0.400 V I will try to experiment with settings from "Winbond W83627EHF configuration for ASRock AM2NF3-VSTA" < http://www.lm-sensors.org/wiki/Configurations/ASRock/AM2NF3-VSTA > Thank you all -- Jay A. Fleming _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors