Sender : 김동근<dg77.kim@xxxxxxxxxxx> > This patch adds support for NTC Thermistor series. In this release, the > following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473, > and NCP15WL333. This driver is based on the datasheet of MURATA. > > The driver in the patch does conversion from the raw ADC value > (either voltage or resistence) to temperature. In order to use > voltage values as input, the circuit schematics should be provided > with the platform data. A compensation table for each type of thermistor > is provided for the conversion. > > Signed-off-by: Donggeun Kim > Signed-off-by: MyungJoo Ham > Signed-off-by: KyungMin Park > [] > +Sysfs Interface > +--------------- > +name the mandatory global attribute, the thermistor name. > + > +temp1_type always 4 (thermistor) > + RO > + > +temp1_max the highest temperature possible from the compensation table. > + RO > + > +temp1_min the lowest temperature possible from the compensation table. > + RO Please update the documents; min and max were dropped in this patch. Thanks. - MyungJoo MyungJoo Ham (함명주) Mobile Software Platform Lab, Digital Media and Communications (DMC) Business Samsung Electronics cell: +82-10-6714-2858 / office: +82-31-279-8033 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
