This is great!! Thanks very much once again! I'll give this a try.... Harry McGavran On Sun, 22 May 2011 10:26:25 +0200 Jean Delvare wrote: > Hi Harry, hi Jeff, > > I just updated the driver at: > http://khali.linux-fr.org/devel/misc/emc6w201/ > > Changes in this version: > * All limits can be changed. > > Basically this means you can now add "set" statements to your > configuration file to adjust the limits as needed. If I remember > correctly, voltage as well as high temperature limits were already good > from the BIOS so you shouldn't have to change them. Fan limits were > pretty low so you may want to adjust them, same for low temperature > limits. > > Beware though: the monitoring chip may be configured and wired to take > action on out-of-limits events. The low temperature limits may have > been disabled by Dell on purpose, so that temperature alarms can only > reflect over-temperature conditions and appropriate action can be > taken (e.g. speeding up all fans, beeping or shutting the system down.) > So you should be prudent when changing the limits. > > Feedback welcome. I intend to prepare a patch based on this version of > the driver and submit it for inclusion in the upstream kernel. > > -- > Jean Delvare -- Harry G. McGavran, Jr. E-mail: w5pny@xxxxxxxxx _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
