Hi David, On Wed, 27 Apr 2011 22:10:54 +0200, David Santamaría Rogado wrote: > The configuration for Gigabyte MA785GM-US2H > http://www.lm-sensors.org/wiki/Configurations/Gigabyte/MA785GM-US2H is > wrong, at least for rev 1.0 of the mobo. in7 is not +12V, is an > strange voltage that varies with the frequency of the cores. Is > possible to determinate approximately it's value knowing the highest > freq of all the cores in the system. If there are doubts, with that > config and an Athlon II 250 the voltage show by in7 with the > multiplier is about 24 V. Thanks for reporting. > I can provide the config the works with my MA785GM-US2H rev 1.0. Yes, please do, and I'll update the wiki with your fixed version. > The > only thing I doesn't know sure are the fans because I have only tested > cpu fan. Anyway it's based on a UD2H cfg found on the internet, being > identical motherboards only differing in dolby theatre support over > spdif. "Found on the internet" as in http://khali.linux-fr.org/devel/lm-sensors/sensors3-Gigabyte-MA785GMT-UD2H.conf ? ;) -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
