The configuration for Gigabyte MA785GM-US2H http://www.lm-sensors.org/wiki/Configurations/Gigabyte/MA785GM-US2H is wrong, at least for rev 1.0 of the mobo. in7 is not +12V, is an strange voltage that varies with the frequency of the cores. Is possible to determinate approximately it's value knowing the highest freq of all the cores in the system. If there are doubts, with that config and an Athlon II 250 the voltage show by in7 with the multiplier is about 24 V. I can provide the config the works with my MA785GM-US2H rev 1.0. The only thing I doesn't know sure are the fans because I have only tested cpu fan. Anyway it's based on a UD2H cfg found on the internet, being identical motherboards only differing in dolby theatre support over spdif. _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
